Superior MultiTransmitter IO (4X4) Fibra este o componentă de sistem de alarmă Ajax din categoria „Integration modules”.

Pe scurt, aparatul are alimentare 12 V DC și funcționare între −10 și +55 °C. Fizic, cântărește 46 g și are dimensiunile 93 × 55 × 27 mm.

Pentru Superior MultiTransmitter IO (4X4) Fibra, Ajax nu oferă un fișier de firmware descărcabil. Mai jos scrie cum se actualizează.

Specificațiile complete, cu etichetele traduse în română, sunt în tabelul de mai jos.

Cum se actualizează Superior MultiTransmitter IO (4X4) Fibra

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații Superior MultiTransmitter IO (4X4) Fibra

Fibra communication technology

Proprietary wired communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Instant notifications.
- Remote control and configuration in Ajax apps.

Line connection

4-core cable

Connection

to any point of the Fibra line
The device can be installed behind the hub or any other device.

Fibra line length

Până la 2,000 m
When the U/UTP cat.5 twisted pair cable is used.

Comunicație criptată

All stored and transmitted data are protected by block encryption featuring a dynamic key.

Number of input lines for third-party devices

Input terminals

- Z1–Z4 — inputs for connecting third-party wired devices.
- COM — common inputs for connecting signal contacts of third-party wired devices.

Type of connection

NO, NC, EOL, 2EOL, 3EOL, roller shutter
With the EOL total resistance from 1 kΩ to 15 kΩ with a 100 Ω increment.

EOL resistor scanning

Allows you to measure EOL resistance automatically.

Operating mode of connected sensors

Detect alarms
Allows receiving alarms from connected third-party devices that detect doors being opened, vibration, glass breakage, gas and water leakage, etc.
Switch arming modes (KeyArm)
KeyArm allows arming/disarming the system and individual groups or setting up Night mode.
Control of blocking element
Allows controlling the position of the blocking element pin.
Control of bolt lock
Allows controlling the position of the lock bolt switch.

Operating mode

pulse
bistable
It can be configured in Ajax apps.

Length of the wired connection to third-party devices

Până la 400 m
For the EOL connection type, with the U/UTP cat.5, 4×2×0.51 mm (24 AWG) cable, copper conductor, or 4×0.22 mm2 signal cable, copper conductor (cable resistance of 22 Ω per 100 m) if the device is powered by an external power supply. The maximum connection length for devices powered by an integration module depends on cable resistance and the sensor’s current consumption.

Number of output lines for third-party devices

4
The device is equipped with 2 logic outputs and 2 relays with dry contact.

Output terminals

- Relay1, Relay2 — relay outputs for connecting third-party wired devices. Maximum switching current is 1 A.
- L1, L2 — logic outputs for connecting third-party wired devices with a maximum load capacity of up to 25 mA.

Output modes

Relay
Allows controlling connected third-party devices (only for relay outputs).
Blocking element
Allows controlling the blocking element.
Electric lock
Allows controlling the electric lock.

Switch state by timer

If enabled, the connected device automatically switches to the opposite state when the selected Operating time expires.

Operating time

from 1 s – 3 min
It can be configured for pulse mode in Ajax apps separately for each relay.

Automation scenarios

They can be configured in Ajax apps separately for each relay.

Relay state stability

If the feature is enabled, the current state of the relay contacts remains the same even after the power supply from the hub fails.

Controlling the blocking element position

The feature allows you to check the device’s operation or forcibly change its position. It is configured in an Ajax app when the Blocking element output mode is selected.

Unavoidability principle

Superior MultiTransmitter IO (4X4) Fibra is an all-in-one solution for connecting third-party devices required for automatic door locking/unlocking on arming/disarming according to the unavoidability principle (German: Zwangsläufigkeit).

Tipuri de evenimente

An Ajax app specifies the event types for wired device inputs. The selected type determines the text of alarm notifications and events of the connected device, as well as event codes transmitted to the CMS. A PRO or a user with admin rights in an Ajax app can configure the type of event.

Remote firmware update

When a new firmware is available, an admin or a PRO with rights to configure the system can run the update in Ajax apps.

Alarmă anti-sabotaj

Notification when the lid is opened or an attempt is made to detach the device from the surface or remove it from the mounting panel. The device has a connector that allows connecting a tamper board to the module. It is available in Case, which is sold separately.

Protecție anti-spoofing

Autentificare dispozitiv

Connection loss detection

after 36 s
Detection time depends on the Jeweller/Fibra settings.

Instant detection of wired connection loss, short circuits, and malfunctions

when the 2EOL/3EOL connection is used
Depends on the connection type.

Instant detection of short circuits of the power outputs

After detection, the system stops the power supply and sends a notification to the user.

Fibra line

12−28 V⎓, up to 330 mA at a nominal voltage of 24 V⎓
The hub powers the device.

Power supply of connected wired devices

12 V⎓, up to 500 mA
Maximum total current consumption by third-party devices at a nominal voltage of 12 V⎓ should not exceed 500 mA.

Power terminals for input devices

- +12V — 12 V⎓ power supply output for third-party wired sensors.
- GND — power ground.

Power terminals for output devices

- +12V — power supply output for third-party electromechanical elements such as electric locks and 12 V⎓ blocking elements.
- GND — power ground of third-party electromechanical elements.

Dimensiuni

93 × 55 × 27 mm

Greutate

46 g

Interval temperatură de funcționare

from −10 °C – +55 °C

Umiditate de funcționare

Până la 75% fără condensare

Superior MultiTransmitter IO (4X4) Fibra

Ghid de pornire rapidă

Conformitate cu standardele de alarmă

EN 50131-1:2006 / A1:2009 / A2:2017 / A3:2020
EN 50131-3:2009
PD 6662:2017*
Certificate issued by TREZOR TEST s.r.o.

Grad de securitate (SG)

3
Certificate issued by TREZOR TEST s.r.o.

Directiva RoHS

EN IEC 63000:2018
Test report issued by Shenzhen NTEK Testing Technology Co.

Directiva EMC

EN 55032:2015+A1:2020
EN 55035:2017+A11:2020
Certificate issued by MiCOM Labs

Clasă de mediu conform EN 50131

II
Certificate issued by TREZOR TEST s.r.o.

Recognition and registration of electronic security technology products

Approved device classes:
GS-H, GS-H, P/S
Certificate issued by VSÖ

Certification NF&A2P – 3 Boucliers suivant le référentiel NF324-H58

NF324/H58
NF EN 50131-3
RTC 50131-3
NF EN50130-4
NF EN50130-5
NF EN50131-6
Organismes certificateurs:
www.cnpp.com
www.marque-nf.com
Certificat №: 24050011

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.

Documente oficiale

Denumiri și variante: Superior MultiTransmitter IO (4X4), Superior MultiTransmitter IO 4X4, MTR.IO.F