Ajax Ajax Superior MultiTransmitter (8 inputs) Fibra este o componentă de sistem de alarmă, listat de producător la „Integration modules”.

Printre caracteristicile tehnice se numără alimentare 12 V DC și funcționare între −10 și +40 °C. Fizic, cântărește 37 g și are dimensiunile 90 × 50 × 22 mm.

Ajax nu publică un fișier de firmware pentru Ajax Superior MultiTransmitter (8 inputs) Fibra. Mai jos scrie cum se actualizează.

Mai jos găsești fișa tehnică completă, tradusă în română.

Cum se actualizează Ajax Superior MultiTransmitter (8 inputs) Fibra

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații Ajax Superior MultiTransmitter (8 inputs) Fibra

Fibra data transfer protocol

Proprietary wired protocol for transmitting commands, alarms, and other events.
Key features:
- Two-way communication
- Advanced sabotage protection
- Instant notifications
- Remote control and configuration in Ajax apps

Line connection

4-core cable

Connection

to any point on the Fibra line
The device can be connected after a hub, detector, keypad, or siren.

Fibra line length

Până la 2,000 m
When a U/UTP cat.5 twisted-pair cable is used.

Comunicație criptată

All stored and transmitted data is protected by block encryption featuring a dynamic key.

Number of zones

8 wired zones
Multiple devices can be connected to one zone. The number of connected devices depends on their power consumption.

Lungime cablu

Până la 400 m
For the EOL connection type, with a U/UTP cat.5 4×2×0.51 mm (24 AWG) cable with a copper conductor, or a 4×0.22 mm2 signal cable with a copper conductor (cable resistance of 22 Ω per 100 m) if the device is powered by an external power supply. The maximum connection length for devices powered by the integration module depends on cable resistance and the sensor current consumption.

Type of connection

NC, NO, EOL, 2EOL, 3EOL, or roller shutter
With EOL resistance ranging from 1 kΩ to 30 kΩ in increments of 100 Ω.

EOL resistor scanning

Allows automatic measurement of EOL resistance.

Operating mode of connected sensors

- Detect alarms — allows receiving alarms from connected third-party devices that detect door opening, vibration, glass breakage, gas and water leaks, etc.
- Switch security modes (KeyArm) — allows arming/disarming the system or individual groups, as well as managing Night mode.
- Control of blocking element — allows checking the position of the blocking element pin.
- Control of bolt lock — allows checking the position of the lock bolt switch.

Operating mode

pulse, bistable

Tipuri de evenimente

configurable event types for wired devices
Adjusted by a PRO or a user with admin rights in an Ajax app.

For indoor use only. It is recommended to install the module in an Ajax casing, which is sold separately and is available in several versions.

How to install devices in Case

Case configurator

Alarmă anti-sabotaj

The board has a connector for a tamper board. The tamper board detects when the casing lid is opened and alerts users if someone attempts to detach the casing with the installed integration module from the surface.

Protecție anti-spoofing

Ensures authentication of the integration module when it communicates with a hub.

Detecție pierdere comunicație

after 36 seconds of signal loss
Detection time depends on Jeweller/Fibra settings.

Instant detection of wired connection loss, short circuits, and faults

when a 2EOL/3EOL connection is used
Depends on the connection type.

Instant detection of short circuits at power outputs

When a short circuit is detected, the system cuts off the power supply and sends a notification to a user.

Fibra line

12−28 V⎓, up to 330 mA at a nominal voltage of 24 V⎓
The hub powers the module via the Fibra line.

Power supply of connected wired devices

11.5–12.5 V⎓, up to 500 mA at a nominal voltage of 12 V⎓
Maximum total current consumption by third-party devices at a nominal voltage of 12 V⎓ should not exceed 500 mA.

Power terminals for input devices

- +12V — power output for third-party wired devices
- GND — ground terminal that connects the power supply circuits of wired devices
The module has one power supply line with two pairs of terminals for more convenient connection.

Dimensiuni

90 × 50 × 22 mm

Greutate

37 g

Interval temperatură de funcționare

from −10 °C – +40 °C

Umiditate de funcționare

Până la 75% fără condensare

Ajax Superior MultiTransmitter (8 inputs) Fibra

Ghid de pornire rapidă

Conformitate cu standardele de alarmă

EN 50131-1:2006 / A1:2009 / A2:2017 / A3:2020
EN 50131-3:2009
PD 6662:2017*
Certificate issued by TREZOR TEST s.r.o.