Superior MultiTransmitter Fibra este o componentă de sistem de alarmă Ajax din categoria „Integration modules”.

Pe scurt, aparatul are alimentare baterie, rezistență la impact IK06 și funcționare între −10 și +40 °C. Fizic, cântărește 795 g și are dimensiunile 197 × 240 × 100 mm.

Pentru Superior MultiTransmitter Fibra, Ajax nu oferă un fișier de firmware descărcabil. Mai jos scrie cum se actualizează.

Specificațiile complete, cu etichetele traduse în română, sunt în tabelul de mai jos.

Cum se actualizează Superior MultiTransmitter Fibra

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații Superior MultiTransmitter Fibra

Superior MultiTransmitter Fibra

MTR.Y.F — specificațiile de mai jos

Superior MultiTransmitter Fibra (without casing)

MTR.G3.F-001

Fibra communication technology

Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Instant notifications.
- Remote control and configuration via Ajax apps.

Line connection

4-core cable

Fibra line length

Până la 2,000 m
When the U/UTP cat.5 twisted pair cable is used.

Comunicație criptată

All stored and transmitted data are protected by block encryption featuring a dynamic key.

Number of zones

18 wired zones
Multiple devices can be connected to one zone. The number of connected devices depends on their power consumption.

Type of connection

NC, NO, EOL, 2EOL, 3EOL
With EOL resistance from 1 kΩ to 30 kΩ with 100 Ω increment.

Lungime cablu

Până la 400 m
When a copper signal cable with a 0.22 mm² cross-sectional area of the conductor is used.

Operation mode

pulse, bistable

Tipuri de evenimente

15 event types for wired devices are available:
- Tamper alarm
- Intrusion
- Fire
- Auxiliary alarm
- Panic button
- Gas alarm
- Malfunction
- Leakage
- Glass break
- High temperature
- Low temperature
- Masking
- Duress code (opening)
- Vibration (seismic sensor)
- Custom
Adjusted by a PRO or a user with admin rights in an Ajax app.

Alarmă anti-sabotaj

Two tampers detect the opening of the lid and notify of attempts to tear the device from the surface or remove it from the mount.

Protection against forgery

Autentificare dispozitiv

Detecție pierdere comunicație

within 36 seconds
Between a hub and Superior MultiTransmitter Fibra.

Instant detection of wired connection loss, short circuits, and malfunctions

when 2EOL/3EOL connection is used
Depends on the connection type.

Main

100–240 V~

Backup

12 V⎓, up to 7 Ah capacity with a full charge cycle of up to 30 hours

Tip

type A
Used inside the protected premises.

Operating AC voltage range

100–240 V~, 50/60 Hz
Main power supply.

Operating DC voltage range

10.5–15 V⎓
Backup power supply.

Quiescent current consumption at nominal voltage

25 mA*

Maximum current consumption at nominal voltage

30 mA*
* From the backup rechargeable battery after the loss of the main power supply.

Backup rechargeable battery capacity

Până la 7 Ah with a full charge cycle of up to 30 hours**
When a 4 Ah rechargeable battery is used, the minimum operating time at a maximum load of 1.7 А is 2 hours. For autonomous operation for 12 or 24 hours, the maximum load should not exceed 0.3 A and 0.15 A, respectively.
When a 7 Ah rechargeable battery is used, the minimum operating time at a maximum load of 1.7 А is 4 hours. For autonomous operation for 12 or 24 hours, the maximum load should not exceed 0.4 A and 0.2 A, respectively.
** It is the maximum time to recharge a 7 Ah battery to 80% of its capacity.

Power supply of connected wired devices

10.5–15 V⎓, up to 1 A (total maximum current consumption)
Three power supply lines from Superior MultiTransmitter Fibra.

Power supply of connected fire detectors

10.5–15 V⎓, up to 0.4 A
One power supply line from Superior MultiTransmitter Fibra.

Tensiune la baterie descărcată

11.6 V⎓

Tensiune de revenire după descărcare

12.9 V⎓

Tensiune baterie la final de viață

11 V⎓

Maximum output peak-to-peak ripple voltage

200 mV⎓

Minimum backup rechargeable battery energy level in the charged state

100%

Dimensiuni

197 × 240 × 100 mm

Weight of the device in a black casing

795 g
Excluding the backup rechargeable battery.

Weight of the device in a white casing

867 g
Excluding the backup rechargeable battery.

Interval temperatură de funcționare

from −10°C – +40°C

Umiditate de funcționare

Până la 75%

Clasă de protecție

IP30, IK06
The new casing version of Superior MultiTransmitter Fibra has light guides for the integration module LED indication, while the previous version has the LED indicator on the board.

Negru

Alb

Superior MultiTransmitter Fibra

Power cable

Screw terminal block adapter (for INCERT compliance only)

12 V battery connection cable

Casing (depending on the kit)

Kit de montaj

Ghid de pornire rapidă

Conformitate cu standardele de alarmă

EN 50131-3:2009
EN 50131-6:2017 / A1:2021
EN 50131-1:2006 / A1:2009 / A2:2017 / A3:2020
Certificate issued by TREZOR TEST s.r.o.

Grad de securitate (SG)

3
Certificate issued by TREZOR TEST s.r.o.

Directiva RoHS

EN IEC 63000:2018
Test report issued by Shenzhen NTEK Testing Technology Co.

Directiva EMC

EN 55032:2015+A11:2020
EN 55035:2017+A11:2020
Certificate issued by MiCOM Labs

Directiva de joasă tensiune (LVD)

EN 62368-1:2014/A11:2017
Test report issued by Shenzhen NTEK Testing Technology Co.

Clasă de mediu conform EN 50131

||
Certificate issued by TREZOR TEST s.r.o.

INCERT

T 031:2017+A1:2018+A2:2022
Certificate issued by Kiwa Nederland B.V.

SSF

SSF 1014v6: Larmklass 2
Certificate issued by Svensk Certifiering Norden AB

PSTI UK

Schedule 1

Certification NF&A2P – 2 Boucliers @ suivant le référentiel NF324-H58

NF324-H58
NF EN 50131-3
RTC 50131-3
NF EN 50131-6
RTC 50131-6
NF EN 50130-4
NF EN 50130-5
RTC Cyber
Organismes certificateurs :
www.cnpp.com
www.marque-nf.com
Certificat №: 1224050011

Recognition and registration of electronic security technology products

Approved device classes:
GS-H, GS-H, P/S
Certificate issued by VSÖ

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.