Superior MultiTransmitter G3 Jeweller (without casing) este o componentă de sistem de alarmă Ajax din categoria „Integration modules”.

Câteva date tehnice importante: alimentare baterie, rezistență la impact IK06 și funcționare între −10 și +40 °C. Fizic, cântărește 847 g și are dimensiunile 196 × 240 × 100 mm.

Nu există un firmware public de la Ajax pentru Superior MultiTransmitter G3 Jeweller (without casing). Mai jos scrie cum se actualizează.

Tabelul de specificații de mai jos conține toate datele tehnice publicate de producător, traduse în română.

Cum se actualizează Superior MultiTransmitter G3 Jeweller (without casing)

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații Superior MultiTransmitter G3 Jeweller (without casing)

Superior MultiTransmitter G3 Jeweller

MTR.G3.J — specificațiile de mai jos

Superior MultiTransmitter G3 Jeweller (without casing)

MTR.G3WC.J

Superior Jeweller data transfer protocol

Proprietary wireless protocol for transmitting commands, alarms, and events. An upgraded version of the Jeweller radio protocol for Ajax Superior devices, ensuring compliance with Grade 3 (EN 50131).
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Enhanced block encryption with a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.

Benzi de frecvență

865.0–868.0 MHz
868.0–868.6 MHz
868.7–869.2 MHz
869.4–869.65 MHz

Putere maximă radiată (ERP)

Până la 25 mW

Modulație semnal radio

GFSK

Rază de comunicație radio

Până la 3,500 m
Between the device and a hub (or a range extender) in open space. The maximum range depends on the hub model.

Comunicație criptată

All stored and transmitted data is protected with advanced encryption, ensuring both confidentiality and integrity.

Salt de frecvență

To prevent radio interference and jamming.

Tehnologie de comunicație Wings

Proprietary wireless communication technology for uploading firmware updates.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Data packet reload in case of transmission errors.
- Data packets delivery check.

Benzi de frecvență

865.0–868.0 MHz
868.0–868.6 MHz
868.7–869.2 MHz
869.4–869.65 MHz

Rază de comunicație radio

Până la 3,000 m
Between the device and a hub (or a range extender) in an open space. The maximum range depends on the hub model.

Comunicație criptată

All stored and transmitted data is protected with advanced encryption, ensuring both confidentiality and integrity.

Salt de frecvență

To prevent radio interference and jamming.

Number of zones

18 wired zones
Multiple devices can be connected to one zone. The number of connected devices depends on their power consumption.

Lungime cablu

Până la 400 m
When a copper signal cable with a 0.22 mm2 cross-sectional area of the conductor is used.

Type of connection

NC, NO, EOL, 2EOL, 3EOL
With EOL resistance from 1 kΩ to 30 kΩ in increments of 100 Ω.

EOL resistor scanning

Allows automatic measurement of EOL resistance.

Operating mode of connected sensors

- Detect alarms — allows receiving alarms from connected third-party devices that detect doors being opened, vibration, glass breakage, gas and water leakage, etc.
- Switch arming modes (KeyArm) — allows arming/disarming the system and individual groups or setting up Night mode.
- Control of blocking element — allows controlling the position of the blocking element pin.
- Control of bolt lock — allows controlling the position of the lock bolt switch.

Operating mode

pulse, bistable

Tipuri de evenimente

configurable event types for wired device alarms
Adjusted by a PRO or a user with admin rights in an Ajax app.

Alarmă anti-sabotaj

The system sends notifications about attempts to open the integration module casing lid or detach the casing from the surface.

Protecție anti-spoofing

Ensures integration module authentication when it communicates with a hub.

Detecție pierdere comunicație

after 36 seconds of no signal
Detection time depends on Jeweller or Jeweller/Fibra settings.

Instant detection of wired connection loss, short circuits, and malfunctions

when the 2EOL/3EOL connection is used
Depends on the connection type.

Instant detection of short circuits at power outputs

After detection, the system stops supplying power and sends a notification to the user.

Main

100–240 V~

Backup

12 V⎓, up to 7 Ah capacity, with a full charge cycle of up to 24 hours

Tip

type A
Used inside protected premises.

Operating AC voltage range

100–240 V~, 50/60 Hz
Main power supply.

Operating DC voltage range

10.5–15 V⎓
Backup power supply.

Quiescent current consumption at nominal voltage

22 mA1 — no wired devices are connected
35.5 mA1 — 18 NC wired devices are connected

Maximum current consumption at nominal voltage

measured:
- 24 mA1 — no wired devices are connected
- 37.5 mA1 — 18 NC wired devices are connected
calculated:
- 90 mA1 — no wired devices are connected
- 103.5 mA1 — 18 NC wired devices are connected
1 From the backup rechargeable battery after the loss of the main power supply.

Backup rechargeable battery capacity

Până la 7 Ah with a full charge cycle of up to 24 hours2
For autonomous operation for 60 hours and operation of a connected wired device for 15 minutes, the maximum load should not exceed 68 mA.
2 This is the maximum time required to recharge a 7 Ah battery to 80% of its capacity.

Power supply of connected wired devices

10.5–15 V⎓, up to 1 A (total maximum current consumption)
Four power supply lines from Superior MultiTransmitter G3 Jeweller.

Power supply of connected fire detectors

10.5–15 V⎓, up to 0.4 A
One power supply line from Superior MultiTransmitter G3 Jeweller.

Tensiune la baterie descărcată

11.3 V⎓

Tensiune de revenire după descărcare

14.4 V⎓

Tensiune baterie la final de viață

10.5 V⎓
The integration module switches off.

Maximum output peak-to-peak ripple voltage

200 mV⎓

Minimum energy level of a fully charged backup battery

100%

Dimensiuni

196 × 240 × 100 mm

Weight of the device in a black casing

847 g

Weight of the device in a white casing

882 g

Interval temperatură de funcționare

from −10 °C – +40 °C

Umiditate de funcționare

Până la 75%

Clasă de protecție

IP30, IK06

Negru

Alb

Superior MultiTransmitter G3 Jeweller

Power cable

Battery connection cable

Casing

Kit de montaj

Ghid de pornire rapidă

Conformitate cu standardele de alarmă

EN 50131-1:2006/A1:2009/A2:2017/A3:2020
EN 50131-3:2009
EN 50131-5-3:2017
EN 50131-6:2017/A1:2021
Certificate issued by TREZOR TEST s.r.o.

Grad de securitate (SG)

3
Certificate issued by TREZOR TEST s.r.o.

Directiva RoHS

EN IEC 63000:2018
Test report issued by Shenzhen NTEK Testing Technology Co.

Directiva RED

ETSI EN 300 220-1 V3.1.1
ETSI EN 300 220-2 V3.2.1
Certificate issued by TIMCO Engineering, Inc.

Directiva EMC

ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-3 V2.3.2
EN 55032:2015+A11:2020
EN 55035:2017+A11:2020
EN IEC 61000-3-2:2019+A1:2021+A2:2024
EN 61000-3-3:2013+A1:2019+A2:2021
Certificate issued by MiCOM Labs

Directiva de joasă tensiune (LVD)

EN IEC 62368-1:2024+A11:2024
EN IEC 62479:2010
Test report issued by Shenzhen NTEK Testing Technology Co.

Clasă de mediu conform EN 50131

II
Certificate issued by TREZOR TEST s.r.o.

PSTI UK

Schedule 1

INCERT

T 031:2017+A1:2018+A2:2022
Certificate issued by Kiwa Nederland B.V.

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.

Documente oficiale

Denumiri și variante: Superior MultiTransmitter G3 (without casing), Superior MultiTransmitter G3 without casing, MTR.G3WC.J