Ajax MultiTransmitter Jeweller este o componentă de sistem de alarmă, listat de producător la „Integration modules”.

Din fișa tehnică reținem: alimentare 12 V DC, protecție IP40, rezistență la impact IK06 și funcționare între −10 și +40 °C. Fizic, cântărește 874 g și are dimensiunile 192 × 238 × 100 mm.

Ajax nu publică un fișier de firmware pentru MultiTransmitter Jeweller. Mai jos scrie cum se actualizează.

Specificațiile complete, cu etichetele traduse în română, sunt în tabelul de mai jos.

Cum se actualizează MultiTransmitter Jeweller

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații MultiTransmitter Jeweller

Tehnologie de comunicație Jeweller

Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced anti-sabotage.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.

Benzi de frecvență

866.0 – 866.5 MHz
868.0 – 868.6 MHz
868.7 – 869.2 MHz
905.0 – 926.5 MHz
915.85 – 926.5 MHz
921.0 – 922.0 MHz
Depends on the sales region.

Putere maximă radiată (ERP)

Până la 20 mW

Modulație semnal radio

GFSK

Rază semnal radio

Până la 2,000 m
Between an integration module and a control panel (or range extender) in an open space.

Comunicație criptată

All stored and transmitted data are protected by block encryption featuring a dynamic key.

Salt de frecvență

To prevent radio interference and jamming.

Number of zones

18 wired zones
Multiple devices can be connected to one zone. The number of connected devices depends on their power consumption.

Type of connection

NC, NO, EOL
MultiTransmitter Jeweller with a firmware version lower than 2.13.
NC, NO, EOL, 2EOL, 3EOL
2EOL and 3EOL connection types are only available for MultiTransmitter Jeweller with the firmware version 2.13.0 or later. The integration module should be added to a compatible hub running on OS Malevich 2.13 or later. If Hub (4G) Jeweller is used, the control panel should be updated to OS Malevich 2.28 or later.

EOL resistance

from 1 kΩ to 7.5 kΩ with 100 Ω increment
MultiTransmitter Jeweller with a firmware version lower than 2.13. EOL resistance is measured automatically in the Ajax PRO apps.
from 1 kΩ to 15 kΩ for each resistor, up to 30 kΩ of total resistance
MultiTransmitter Jeweller with a firmware version 2.13 and higher. Resistance is measured automatically for each EOL resistor in the Ajax PRO apps.

Lungime cablu

Până la 400 m
When using a signal cable with a 0.22 mm² copper-clad aluminium conductor.

Operation mode

pulse, bistable
Adjusted by a PRO or user with admin rights in the Ajax app.

Tipuri de evenimente

15 event types of wired devices
- Tamper alarm
- Intrusion
- Fire
- Auxiliary alarm
- Panic button
- Gas alarm
- Malfunction
- Leakage
- Glass break
- High temperature
- Low temperature
- Masking
- Duress code (opening)
- Vibration (seismic sensor)
- Custom
Adjusted by a PRO or a user with admin rights in the Ajax app.

Alarmă anti-sabotaj

Two tampers to detect the MultiTransmitter Jeweller casing opening and alert about detachment from the wall.

Protecție anti-spoofing

Autentificare dispozitiv

Detecție pierdere comunicație

within 36 seconds
Between a hub or range extender and MultiTransmitter Jeweller. The detection time depends on the Jeweller or Jeweller/Fibra settings.

Instant detection of wired connection loss, short circuits, and malfunctions

when using EOL/2EOL/3EOL connection type
Depends on the connection type.

MultiTransmitter Jeweller power supply

100–240 V~, 50/60 Hz

Tip

type A
Power supply is used inside the supervised premises.

Device’s operating voltage range

100–240 V~, 50/60 Hz

Quiescent device’s current consumption at nominal voltage

14.6 mA

Maximum device’s current consumption at nominal voltage

69.6 mA

MultiTransmitter Jeweller backup power supply

12 V⎓, up to 7 Ah capacity with a full charge cycle of up to 30 hours
MultiTransmitter Jeweller average consumption from the backup battery after the main power supply loss is up to 33 mA (without detectors). When using a 7 Ah battery, the minimum operating time at a maximum load of 1 А will be 7 hours. For autonomous work for 12 or 24 hours, the maximum load should be no more than 0.55 A and 0.28 A, respectively.
The backup battery is not included in the set.

Tensiune la baterie descărcată

11.4 V⎓

Tensiune de revenire după descărcare

12.9 V⎓

Tensiune baterie la final de viață

11.1 V⎓

Maximum output peak-to-peak ripple battery voltage

50 mV⎓

Minimum backup battery energy level in the charged state

100%

Connected devices power supply

10.5–15 V⎓, up to 1 A of total maximum current consumption
Two power lines powered by MultiTransmitter Jeweller for other devices. One power line for fire detectors.

Dimensiuni

192 × 238 × 100 mm

Greutate (varianta albă)

874 g

Greutate (varianta neagră)

802 g

Interval temperatură de funcționare

from −10 °C – +40 °C

Umiditate de funcționare

Până la 75%

Clasă de protecție

IP40, IK06
The new casing version of MultiTransmitter Jeweller has light guides for the integration module LED indication, while the previous version has the LED indicator on the board.

Negru

Alb

MultiTransmitter Jeweller board

Casing

Power cable

Screw terminal block Adapter (only for INCERT compliance)

12 V⎓ battery connection cable

Kit de montaj

Ghid de pornire rapidă

Conformitate cu standardele de alarmă

EN 50131-1:2006 / A1:2009 / A2:2017 / A3:2020
EN 50131-6:2017
EN 50131-3:2009**
EN 50131-5-3:2017 / A1:2021
PD 6662:2017*
Certificate issued by TREZOR TEST s.r.o.

Grad de securitate (SG)

2
Certificate issued by TREZOR TEST s.r.o.

Directiva RED

EN 300 220-1 V3.1.1
EN 300 220-2 V3.2.1
Certificate issued by MiCOM Labs

Directiva RoHS

EN IEC 63000:2018
Test report issued by Shenzhen NTEK Testing Technology Co.

Directiva EMC

EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
Certificate issued by MiCOM Labs

Directiva de joasă tensiune (LVD)

EN 62479:2010
EN 62368-1:2014+A11:2017
Certificate issued by MiCOM Labs

Clasă de mediu conform EN 50131

||
Certificate issued by TREZOR TEST s.r.o.

INCERT

T 031:2017+A1:2018+A2:2022
Сertificate issued by Kiwa Nederland B.V.

ID FCC

2AX5VMULTRA-NA
Certification Issued Under the Authority of the Federal Communications Commission

ID IC

26860-MULTRANA1
Certificate issued by MiCOM Labs

CSA

ANSI/UL 62368-1:19
CSA C22.2 No. 62368-1:19
CSA Group Testing & Certification Inc.

Household Burglar-Alarm System Units

UL 1023
UL LLC

Commercial Premises Security Alarm Units and Systems

UL 2610
UL LLC

Standard for Control Units, Accessories and Receiving Equipment for Intrusion Alarm Systems

CAN/ULC S304 (Canada)
UL LLC

Household Fire Warning System Units

UL 985
UL LLC

Residential Fire Warning Alarm Systems Control Units

ULC S545
UL LLC

Proprietary Burglar Alarm Units and Systems

ULC C1076

PSTI UK

Schedule 1

Certification NF&A2P – 2 Boucliers @ suivant le référentiel NF324-H58

NF324-H58
NF EN 50131-3
RTC 50131-3
NF EN 50131-6
NF EN 50131-5-3
RTC 50131-6
NF EN 50130-4
NF EN 50130-5
RTC Cyber
Organismes certificateurs :
www.cnpp.com
www.marque-nf.com
Certificat №: 1224050011

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.