Firmware 9161151

SHA-256: a65f5001494b886246030ce858cfbd88e7b6345ce9009df49059fbc539556eb7
Fișier: firmware_3_3_0_2n_access_unit_m.zip
2N OS version 3.3.0 for 2N IP Access Control Systems includes the following changes
New Functions and Improvements
Firmware management has been consolidated into a new dedicated section: System > Firmware, including firmware auto provisioning settings.
Automatic firmware updates — firmware can now be updated automatically on device startup or on a configurable periodic schedule.
LTS track support— devices can now be assigned to a Long-Term Support firmware track.
Auto provisioning for answering units — firmware auto provisioning is now supported on answering units as well.
Added an option to disable all on-device firmware operations entirely.
Added support for new card type: ICODE® SLI (NXP SL2ICS20)
The Integration > Access Control > Lift feature now supports AXIS A9210 and A9910 Network I/O Relay Modules.
Their relay outputs can be mapped to specific floors within the access control interface, enabling extended floor control and integration into existing elevator management systems. This provides a more compact and cost-effective footprint for multi-story installations.
Essential Corrections
The `SendHttpRequest` Automation block now correctly encodes unsafe characters using percent encoding. To send the backslash `\` and comma `,` characters, they must be escaped with a preceding backslash `\`, otherwise they are used for escaping and separating parameters, respectively.
For example, to send a command containing this text: `https://127.0.0.1/axis-cgi/io/port.cgi?action=2:\`, the backslash must be escaped with a `\` as follows: `https://127.0.0.1/axis-cgi/io/port.cgi?action=2:\\`. This results in a correctly encoded HTTP command: `https://127.0.0.1/axis-cgi/io/port.cgi?action=2%3A%5C`.
Fixed a time profile-related crash in the user detail view of the new web interface.
Fixed auto discovery communication mode (plain, MAC, encrypted) for DESFire cards.
Updated several internal libraries.
Important bug fixes.

SHA-256: 5d7e6698ad2fdf22985b5b5015736a72f988a0383218e5e80b0d7946f67a1c19
Fișier: firmware_3_2_0_2n_access_unit_m.zip
2N OS version 3.2.0 for 2N IP Access Control Systems includes the following changes
New Functions and Improvements
Improved camera image quality with new fisheye corrections. Users can adjust `Custom Image Crop` and toggle `Fisheye Correction` in `Customization > Camera > Internal Camera` to achieve the desired angle of view. Note that `Custom Image Crop` changes are only applied after a stream restart.
Redesigned the `Access > Access Rules` section for an improved user experience.
Added the ability to bypass on-device access control via `Integration > Access Control > Override`; available modes include:
2N on-device access control : Device is managed by 2N access control.
Genetec Synergis : Device is managed by Genetec Synergis access control.
Axis access control : Device is managed by Axis access control.
Essential Corrections
Fixed a memory leak in Automation.
Added and corrected `originator` parameter values in `DtmfEntered` and `SwitchStateChanged` events to accurately reflect the action origin.
Added support for a new Vbus display revision.
Fixed an issue where Access Unit M failed to signalize switch hold after a reboot.
Improved configuration import speed and stability.
Updated several internal libraries.
Important bug fixes.

SHA-256: 360192b26d0892cbcbeed84dd0964ca65f138b3780f10f53b72d737558300a2f
Fișier: firmware_3_1_0_2n_access_unit_m.zip
2N OS version 3.1.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 3.1.x
Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Customization > Audio > Startup and Network States Signalization`.
It may be necessary to refresh the webpage to access the login screen when updating from older firmware because this version generates new device certificates.
Essential Corrections
Improved stability when using 2N Electronic Locks.
Fixed the detection algorithm for logical loops in Automation.
Improved SMTP compatibility.
Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Automation functions containing the ProfileStateChanged block no longer return an error after reboot.
Updated several internal libraries.
Other corrections and fixes.

SHA-256: 17f86789c6dcc918772e8b2cbc5413410a71887559b44efcedde1209c324f11e
Fișier: firmware_3_0_2_2n_access_unit_m.zip
2N OS version 3.0.2 for 2N IP Access Control Systems includes the following changes
Important update notice
If you are updating from version 3.0.0, the new web interface cannot download firmware from the update server.  Update the device using the old web interface  or manually upload  a newer firmware file.
Essential Corrections
Fixed an issue that prevented downloading a new firmware from the update server via the new web interface. As a workaround when updating from version 3.0.0, use the old web interface or manually upload a newer firmware file to the device.
Important bug fixes.
2N OS version 3.0.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 3.0.x
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
Introducing the MVP of our new graphical interface
We are excited to deliver the first Minimum Viable Product of our redesigned graphical interface. This initial release brings several impactful improvements that make everyday work smoother and more intuitive. Among the most notable additions are guided wizards, an enhanced search experience, and other usability upgrades aimed at significantly improving overall user interaction.
Because this is an MVP, some features are still in development. We will continue to refine, expand, and optimize the interface over the coming updates to ensure it reaches its full potential as quickly as possible.
If you’re interested in learning how you can support the ongoing development of the new interface and share your feedback with us, please visit the following link: https://www.2n.com/-/media/Files/Web/downloads/Introducing-the-New-2N-Web-Interface
New Functions and Improvements
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation featu

SHA-256: f47aae355d72febb6ba2711eae66e91a85289c1e97e87693bf9fc0c9b25bf158
Fișier: firmware_2_49_1_80_2n_access_unit_m.zip
2N OS version 2.49.1 for 2N IP Access Control Systems includes the following changes
Essential Corrections
Updated an internal library containing critical vulnerabilities.
Fixed a critical issue with DNS which caused the device to, e.g., become unable to re-register to a SIP server after its IP address changes. This also solved other DNS-related issues.
Important bug fixes.
2N OS version 2.49.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.49.x
Empty device names are no longer supported. Set the name via Services > Web Server > Device Name. If left blank, the device may fail to update.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
The administrator account now accepts "root" as a valid username as well.
AXIS Camera Station integration has been significantly improved:
The ACS tab in the web interface is now renamed to AXIS.
AXIS Camera Station integration is now always enabled and accessible using the device's administrator account.
After the initial login to the web interface, the "root" username can also be used for ACS access.
An optional dedicated ACS account is now available.
If ACS was previously enabled with both username and password configured, the dedicated account can still be used.
If your dedicated ACS account used "admin" or "root" as the username and had the same password as the administrator account, it will be merged with the administrator account and you can continue using the same credentials.
If your dedicated ACS account used "admin" or "root" but had a different password from the administrator account, it will be migrated to a temporary administrator account. You can continue using the same credentials, and the account will be merged with the administrator account after its password is updated.
2N IP Utility can now also be used to configure IP settings after the default password has been changed.
Separate parameters are now available to independently enable and select modes for both License Plate

SHA-256: b4f01848a52eed80a92013d555c68047b8757f0954011b3f54458f48cb625ee2
Fișier: firmware_2_49_1_2n_access_unit_m.zip
2N OS version 2.49.1 for 2N IP Access Control Systems includes the following changes
Essential Corrections
Updated an internal library containing critical vulnerabilities.
Fixed a critical issue with DNS which caused the device to, e.g., become unable to re-register to a SIP server after its IP address changes. This also solved other DNS-related issues.
Important bug fixes.
2N OS version 2.49.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.49.x
Empty device names are no longer supported. Set the name via Services > Web Server > Device Name. If left blank, the device may fail to update.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
The administrator account now accepts "root" as a valid username as well.
AXIS Camera Station integration has been significantly improved:
The ACS tab in the web interface is now renamed to AXIS.
AXIS Camera Station integration is now always enabled and accessible using the device's administrator account.
After the initial login to the web interface, the "root" username can also be used for ACS access.
An optional dedicated ACS account is now available.
If ACS was previously enabled with both username and password configured, the dedicated account can still be used.
If your dedicated ACS account used "admin" or "root" as the username and had the same password as the administrator account, it will be merged with the administrator account and you can continue using the same credentials.
If your dedicated ACS account used "admin" or "root" but had a different password from the administrator account, it will be migrated to a temporary administrator account. You can continue using the same credentials, and the account will be merged with the administrator account after its password is updated.
2N IP Utility can now also be used to configure IP settings after the default password has been changed.
Separate parameters are now available to independently enable and select modes for both License Plate Re

SHA-256: 8ea0e9b90fd94fb1ca34d8c8ec5abcbad1ca2ed8bf4866534b5b6b11b72b4937
Fișier: firmware_2_48_1_2n_access_unit_m.zip
2N OS version 2.48.1 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.48.x
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Devices can now generate Certificate Signing Requests (CSR) directly from the web interface under System > Certificates > CSR.
Changing the web interface password now requires entering the current password. As a result, restoring a configuration will no longer change the password. Auto Provisioning can change the password only if the current one is still set to default.
A firewall has been added to ARTPEC-based devices: IP Style, IP Verso 2.0, IP One, Access Unit QR, and IP Force 2.0.
Essential Corrections
Improved certificate handling.
Prevented some certificates from reverting to factory defaults after a software factory reset (without selecting Network Settings), avoiding potential network disconnection.
Removed certain unnecessary syslog messages.
Improved formatting of exported Directory CSV files.
The `UserAuthorized` Automation block now behaves correctly even for failed authorizations.
DNS request lengths can now be up to 255 characters.
RADIUS certificates are now validated properly in EAP-TLS/MSCHAPv2 scenarios.
Commas in the Subject field of the `SendEmail` Automation block no longer cause the subject line to be truncated.
Improved SMTP reliability.
Enhanced handling of large-scale user directory operations.
Important bug fixes.

SHA-256: 66626e5b67e4c1171882b0179bb59bb460330983faf3fa075bd4ac873877e91f
Fișier: firmware_2_48_0_2n_access_unit_m.zip
2N OS version 2.48.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.48.x
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Support for 2N Electronic Locks with Secure Cards added.
Devices can now generate Certificate Signing Requests (CSR) directly from the web interface under System > Certificates > CSR.
Changing the web interface password now requires entering the current password. As a result, restoring a configuration will no longer change the password. Auto Provisioning can change the password only if the current one is still set to default.
A firewall has been added to ARTPEC-based devices: IP Style, IP Verso 2.0, IP One, Access Unit QR, and IP Force 2.0.
Essential Corrections
Improved certificate handling.
Prevented some certificates from reverting to factory defaults after a software factory reset (without selecting Network Settings), avoiding potential network disconnection.
Removed certain unnecessary syslog messages.
Improved formatting of exported Directory CSV files.
The `UserAuthorized` Automation block now behaves correctly even for failed authorizations.
DNS request lengths can now be up to 255 characters.
RADIUS certificates are now validated properly in EAP-TLS/MSCHAPv2 scenarios.
Commas in the Subject field of the `SendEmail` Automation block no longer cause the subject line to be truncated.
Improved SMTP reliability.
Enhanced handling of large-scale user directory operations.
Important bug fixes.