Firmware 916031

SHA-256: 32cfbb195830154e7f19983e4c95d782b2d247894bf23899a8aaa8531ca04f82
Fișier: firmware_3_3_0_2n_access_unit_2_0.zip
2N OS version 3.3.0 for 2N IP Access Control Systems includes the following changes
New Functions and Improvements
Firmware management has been consolidated into a new dedicated section: System > Firmware, including firmware auto provisioning settings.
Automatic firmware updates — firmware can now be updated automatically on device startup or on a configurable periodic schedule.
LTS track support— devices can now be assigned to a Long-Term Support firmware track.
Auto provisioning for answering units — firmware auto provisioning is now supported on answering units as well.
Added an option to disable all on-device firmware operations entirely.
Added support for new card type: ICODE® SLI (NXP SL2ICS20)
The Integration > Access Control > Lift feature now supports AXIS A9210 and A9910 Network I/O Relay Modules.
Their relay outputs can be mapped to specific floors within the access control interface, enabling extended floor control and integration into existing elevator management systems. This provides a more compact and cost-effective footprint for multi-story installations.
Essential Corrections
The `SendHttpRequest` Automation block now correctly encodes unsafe characters using percent encoding. To send the backslash `\` and comma `,` characters, they must be escaped with a preceding backslash `\`, otherwise they are used for escaping and separating parameters, respectively.
For example, to send a command containing this text: `https://127.0.0.1/axis-cgi/io/port.cgi?action=2:\`, the backslash must be escaped with a `\` as follows: `https://127.0.0.1/axis-cgi/io/port.cgi?action=2:\\`. This results in a correctly encoded HTTP command: `https://127.0.0.1/axis-cgi/io/port.cgi?action=2%3A%5C`.
Fixed a time profile-related crash in the user detail view of the new web interface.
Fixed auto discovery communication mode (plain, MAC, encrypted) for DESFire cards.
Updated several internal libraries.
Important bug fixes.

SHA-256: 583d2229188d9bdec5bf18a1c7ba244d410432ccd538615252992a9402018a0a
Fișier: firmware_3_2_0_2n_access_unit_2_0.zip
2N OS version 3.2.0 for 2N IP Access Control Systems includes the following changes
New Functions and Improvements
Improved camera image quality with new fisheye corrections. Users can adjust `Custom Image Crop` and toggle `Fisheye Correction` in `Customization > Camera > Internal Camera` to achieve the desired angle of view. Note that `Custom Image Crop` changes are only applied after a stream restart.
Redesigned the `Access > Access Rules` section for an improved user experience.
Added the ability to bypass on-device access control via `Integration > Access Control > Override`; available modes include:
2N on-device access control : Device is managed by 2N access control.
Genetec Synergis : Device is managed by Genetec Synergis access control.
Axis access control : Device is managed by Axis access control.
Essential Corrections
Fixed a memory leak in Automation.
Added and corrected `originator` parameter values in `DtmfEntered` and `SwitchStateChanged` events to accurately reflect the action origin.
Added support for a new Vbus display revision.
Fixed an issue where Access Unit M failed to signalize switch hold after a reboot.
Improved configuration import speed and stability.
Updated several internal libraries.
Important bug fixes.

SHA-256: 7c33d6827f12c5fad3ab73efd09fd4746d62b77531a334949137adbfbc8e52a1
Fișier: firmware_3_1_0_2n_access_unit_2_0.zip
2N OS version 3.1.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 3.1.x
Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Customization > Audio > Startup and Network States Signalization`.
It may be necessary to refresh the webpage to access the login screen when updating from older firmware because this version generates new device certificates.
Essential Corrections
Improved stability when using 2N Electronic Locks.
Fixed the detection algorithm for logical loops in Automation.
Improved SMTP compatibility.
Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Automation functions containing the ProfileStateChanged block no longer return an error after reboot.
Updated several internal libraries.
Other corrections and fixes.

SHA-256: 3a03a53c9e438593cce246a2f74878dcd7ae411f9445c605611c329dc0c94c70
Fișier: firmware_3_0_2_2n_access_unit_2_0.zip
2N OS version 3.0.2 for 2N IP Access Control Systems includes the following changes
Important update notice
If you are updating from version 3.0.0, the new web interface cannot download firmware from the update server.  Update the device using the old web interface  or manually upload  a newer firmware file.
Essential Corrections
Fixed an issue that prevented downloading a new firmware from the update server via the new web interface. As a workaround when updating from version 3.0.0, use the old web interface or manually upload a newer firmware file to the device.
Important bug fixes.
2N OS version 3.0.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 3.0.x
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
Introducing the MVP of our new graphical interface
We are excited to deliver the first Minimum Viable Product of our redesigned graphical interface. This initial release brings several impactful improvements that make everyday work smoother and more intuitive. Among the most notable additions are guided wizards, an enhanced search experience, and other usability upgrades aimed at significantly improving overall user interaction.
Because this is an MVP, some features are still in development. We will continue to refine, expand, and optimize the interface over the coming updates to ensure it reaches its full potential as quickly as possible.
If you’re interested in learning how you can support the ongoing development of the new interface and share your feedback with us, please visit the following link: https://www.2n.com/-/media/Files/Web/downloads/Introducing-the-New-2N-Web-Interface
New Functions and Improvements
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation fea

SHA-256: a6d83a81aa94208b4eafb8f50c0e1d2ba4568514342d147817b0da7971e093d5
Fișier: firmware_2_50_2_2n_access_unit.zip
2N OS version 2.50.2 for 2N IP Access Control Systems includes the following changes
New Functions and Improvements
Added support for new Wiegand module hardware revision.
Essential Corrections
Important bug fixes.
2N OS version 2.50.1 for 2N IP Access Control Systems includes the following changes
Essential Corrections
Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Fixed an issue where the ProfileStateChanged block in Automation functions caused an error after reboot.
Fixed an issue where Access Unit 1.0 was unable to boot for an extended period after power loss.
Updated several internal libraries.
Important bug fixes.
2N OS version 2.50.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.50.x
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
The `snmpget` function now works correctly on devices using SNMPv3.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
Other corrections and fixes.

SHA-256: a0c950c96b61b83e2eb69e2f29ef58dcadeb5d3560b8225f4d0820be92a26ef8
Fișier: firmware_2_50_1_2n_access_unit.zip
2N OS version 2.50.1 for 2N IP Access Control Systems includes the following changes
Essential Corrections
Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Fixed an issue where the ProfileStateChanged block in Automation functions caused an error after reboot.
Fixed an issue where Access Unit 1.0 was unable to boot for an extended period after power loss.
Updated several internal libraries.
Important bug fixes.
2N OS version 2.50.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.50.x
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
The `snmpget` function now works correctly on devices using SNMPv3.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
Other corrections and fixes.

SHA-256: 2ceb66a096f64f11a9e75b04030428149d1415534597d6f6b38b76a10ef9969a
Fișier: firmware_2_50_0_2n_access_unit.zip
2N OS version 2.50.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.50.x
Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Hardware > Audio > Startup and Network States Signalization`.
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
The `snmpget` function now works correctly on devices using SNMPv3.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
Other corrections and fixes.

SHA-256: a3bcc920381b81ff777e70527e52c6046840270f8b71cbd6ea7f7f571c2a99b9
Fișier: firmware_2_49_1_80_2n_access_unit_2_0.zip
2N OS version 2.49.1 for 2N IP Access Control Systems includes the following changes
Essential Corrections
Updated an internal library containing critical vulnerabilities.
Fixed a critical issue with DNS which caused the device to, e.g., become unable to re-register to a SIP server after its IP address changes. This also solved other DNS-related issues.
Important bug fixes.
2N OS version 2.49.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.49.x
Empty device names are no longer supported. Set the name via Services > Web Server > Device Name. If left blank, the device may fail to update.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
The administrator account now accepts "root" as a valid username as well.
AXIS Camera Station integration has been significantly improved:
The ACS tab in the web interface is now renamed to AXIS.
AXIS Camera Station integration is now always enabled and accessible using the device's administrator account.
After the initial login to the web interface, the "root" username can also be used for ACS access.
An optional dedicated ACS account is now available.
If ACS was previously enabled with both username and password configured, the dedicated account can still be used.
If your dedicated ACS account used "admin" or "root" as the username and had the same password as the administrator account, it will be merged with the administrator account and you can continue using the same credentials.
If your dedicated ACS account used "admin" or "root" but had a different password from the administrator account, it will be migrated to a temporary administrator account. You can continue using the same credentials, and the account will be merged with the administrator account after its password is updated.
2N IP Utility can now also be used to configure IP settings after the default password has been changed.
Separate parameters are now available to independently enable and select modes for both License Pla

SHA-256: d4dc42391352c4f71b35655cc61d25515ec1190fafb865e9e95ff0834008f296
Fișier: firmware_2_49_1_80_2n_access_unit.zip
2N OS version 2.49.1 for 2N IP Access Control Systems includes the following changes
Essential Corrections
Updated an internal library containing critical vulnerabilities.
Fixed a critical issue with DNS which caused the device to, e.g., become unable to re-register to a SIP server after its IP address changes. This also solved other DNS-related issues.
Important bug fixes.
2N OS version 2.49.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.49.x
Empty device names are no longer supported. Set the name via Services > Web Server > Device Name. If left blank, the device may fail to update.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
The administrator account now accepts "root" as a valid username as well.
AXIS Camera Station integration has been significantly improved:
The ACS tab in the web interface is now renamed to AXIS.
AXIS Camera Station integration is now always enabled and accessible using the device's administrator account.
After the initial login to the web interface, the "root" username can also be used for ACS access.
An optional dedicated ACS account is now available.
If ACS was previously enabled with both username and password configured, the dedicated account can still be used.
If your dedicated ACS account used "admin" or "root" as the username and had the same password as the administrator account, it will be merged with the administrator account and you can continue using the same credentials.
If your dedicated ACS account used "admin" or "root" but had a different password from the administrator account, it will be migrated to a temporary administrator account. You can continue using the same credentials, and the account will be merged with the administrator account after its password is updated.
2N IP Utility can now also be used to configure IP settings after the default password has been changed.
Separate parameters are now available to independently enable and select modes for both License Plate R