Modelul 9161121 face parte din gama 2N, categoria „Access control”.

Denumirea oficială a produsului este „2N Access Unit M RFID 13.56 MHz”.

Specificațiile detaliate pentru 9161121 se preiau zilnic din catalogul 2N și apar aici imediat ce sunt publicate.

2N oferă pentru 9161121 firmware-ul V2.49.1.80, lansat la 18.11.2025. Fișierul se descarcă direct de pe serverele 2N; IPCCTV nu găzduiește firmware.

Firmware-ul se încarcă de obicei din interfața web a aparatului sau din software-ul de administrare al producătorului.

Firmware actual

Versiune	Data	Regiune	Descărcare și note
V2.49.1.80Firmware 2.49.1.80 - 2N Access Unit M - 2N Fortis support · Etichetă regiune: Fortis	18.11.2025	Global	Descarcă de la 2N Release notes 16 MB Note de versiune SHA-256: f47aae355d72febb6ba2711eae66e91a85289c1e97e87693bf9fc0c9b25bf158 Fișier: firmware_2_49_1_80_2n_access_unit_m.zip 2N OS version 2.49.1 for 2N IP Access Control Systems includes the following changes Essential Corrections Updated an internal library containing critical vulnerabilities. Fixed a critical issue with DNS which caused the device to, e.g., become unable to re-register to a SIP server after its IP address changes. This also solved other DNS-related issues. Important bug fixes. 2N OS version 2.49.0 for 2N IP Access Control Systems includes the following changes Precautions to be taken during update to FW version 2.49.x Empty device names are no longer supported. Set the name via Services > Web Server > Device Name. If left blank, the device may fail to update. All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating. Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface. In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network. New Functions and Improvements The administrator account now accepts "root" as a valid username as well. AXIS Camera Station integration has been significantly improved: The ACS tab in the web interface is now renamed to AXIS. AXIS Camera Station integration is now always enabled and accessible using the device's administrator account. After the initial login to the web interface, the "root" username can also be used for ACS access. An optional dedicated ACS account is now available. If ACS was previously enabled with both username and password configured, the dedicated account can still be used. If your dedicated ACS account used "admin" or "root" as the username and had the same password as the administrator account, it will be merged with the administrator account and you can continue using the same credentials. If your dedicated ACS account used "admin" or "root" but had a different password from the administrator account, it will be migrated to a temporary administrator account. You can continue using the same credentials, and the account will be merged with the administrator account after its password is updated. 2N IP Utility can now also be used to configure IP settings after the default password has been changed. Separate parameters are now available to independently enable and select modes for both License Plate

Versiuni anterioare

Versiune	Data	Regiune	Descărcare și note
V2.49.1.75Firmware 2.49.1.75 - 2N Access Unit M	22.10.2025	Global	Descarcă de la 2N Release notes 16 MB Note de versiune SHA-256: b4f01848a52eed80a92013d555c68047b8757f0954011b3f54458f48cb625ee2 Fișier: firmware_2_49_1_2n_access_unit_m.zip 2N OS version 2.49.1 for 2N IP Access Control Systems includes the following changes Essential Corrections Updated an internal library containing critical vulnerabilities. Fixed a critical issue with DNS which caused the device to, e.g., become unable to re-register to a SIP server after its IP address changes. This also solved other DNS-related issues. Important bug fixes. 2N OS version 2.49.0 for 2N IP Access Control Systems includes the following changes Precautions to be taken during update to FW version 2.49.x Empty device names are no longer supported. Set the name via Services > Web Server > Device Name. If left blank, the device may fail to update. All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating. Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface. In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network. New Functions and Improvements The administrator account now accepts "root" as a valid username as well. AXIS Camera Station integration has been significantly improved: The ACS tab in the web interface is now renamed to AXIS. AXIS Camera Station integration is now always enabled and accessible using the device's administrator account. After the initial login to the web interface, the "root" username can also be used for ACS access. An optional dedicated ACS account is now available. If ACS was previously enabled with both username and password configured, the dedicated account can still be used. If your dedicated ACS account used "admin" or "root" as the username and had the same password as the administrator account, it will be merged with the administrator account and you can continue using the same credentials. If your dedicated ACS account used "admin" or "root" but had a different password from the administrator account, it will be migrated to a temporary administrator account. You can continue using the same credentials, and the account will be merged with the administrator account after its password is updated. 2N IP Utility can now also be used to configure IP settings after the default password has been changed. Separate parameters are now available to independently enable and select modes for both License Plate Re
V2.48.1Firmware 2.48.1 - 2N Access Unit M	06.08.2025	Global	Descarcă de la 2N Release notes 14 MB Note de versiune SHA-256: 8ea0e9b90fd94fb1ca34d8c8ec5abcbad1ca2ed8bf4866534b5b6b11b72b4937 Fișier: firmware_2_48_1_2n_access_unit_m.zip 2N OS version 2.48.1 for 2N IP Access Control Systems includes the following changes Precautions to be taken during update to FW version 2.48.x All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating. Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface. In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network. New Functions and Improvements Devices can now generate Certificate Signing Requests (CSR) directly from the web interface under System > Certificates > CSR. Changing the web interface password now requires entering the current password. As a result, restoring a configuration will no longer change the password. Auto Provisioning can change the password only if the current one is still set to default. A firewall has been added to ARTPEC-based devices: IP Style, IP Verso 2.0, IP One, Access Unit QR, and IP Force 2.0. Essential Corrections Improved certificate handling. Prevented some certificates from reverting to factory defaults after a software factory reset (without selecting Network Settings), avoiding potential network disconnection. Removed certain unnecessary syslog messages. Improved formatting of exported Directory CSV files. The `UserAuthorized` Automation block now behaves correctly even for failed authorizations. DNS request lengths can now be up to 255 characters. RADIUS certificates are now validated properly in EAP-TLS/MSCHAPv2 scenarios. Commas in the Subject field of the `SendEmail` Automation block no longer cause the subject line to be truncated. Improved SMTP reliability. Enhanced handling of large-scale user directory operations. Important bug fixes.
V2.48.0Firmware 2.48.0 - 2N Access Unit M - 2N Fortis support · Etichetă regiune: Fortis	12.08.2025	Global	Descarcă de la 2N Release notes 14 MB Note de versiune SHA-256: 66626e5b67e4c1171882b0179bb59bb460330983faf3fa075bd4ac873877e91f Fișier: firmware_2_48_0_2n_access_unit_m.zip 2N OS version 2.48.0 for 2N IP Access Control Systems includes the following changes Precautions to be taken during update to FW version 2.48.x All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating. Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface. In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network. New Functions and Improvements Support for 2N Electronic Locks with Secure Cards added. Devices can now generate Certificate Signing Requests (CSR) directly from the web interface under System > Certificates > CSR. Changing the web interface password now requires entering the current password. As a result, restoring a configuration will no longer change the password. Auto Provisioning can change the password only if the current one is still set to default. A firewall has been added to ARTPEC-based devices: IP Style, IP Verso 2.0, IP One, Access Unit QR, and IP Force 2.0. Essential Corrections Improved certificate handling. Prevented some certificates from reverting to factory defaults after a software factory reset (without selecting Network Settings), avoiding potential network disconnection. Removed certain unnecessary syslog messages. Improved formatting of exported Directory CSV files. The `UserAuthorized` Automation block now behaves correctly even for failed authorizations. DNS request lengths can now be up to 255 characters. RADIUS certificates are now validated properly in EAP-TLS/MSCHAPv2 scenarios. Commas in the Subject field of the `SendEmail` Automation block no longer cause the subject line to be truncated. Improved SMTP reliability. Enhanced handling of large-scale user directory operations. Important bug fixes.

Specificațiile sunt cele publicate de 2N, cu etichetele traduse în română (preluate la 05.11.2026). Ce nu am tradus a rămas în engleză.