9160347-S este un dispozitiv de control acces 2N din categoria „Access control”.

Pe scurt, aparatul are alimentare PoE (802.3af), protecție IP54 și rezistență la impact IK08. Ca gabarit, cântărește 800 g.

2N oferă pentru 9160347-S firmware-ul V2.50.2, lansat la 02.10.2026. Fișierul se descarcă direct de pe serverele 2N; IPCCTV nu găzduiește firmware.

Firmware-ul se încarcă de obicei din interfața web a aparatului sau din software-ul de administrare al producătorului.

Specificațiile complete, cu etichetele traduse în română, sunt în tabelul de mai jos.

Firmware actual

Versiune

Data

Regiune

Descărcare și note

V2.50.2Firmware 2.50.2 - 2N Access Unit

02.10.2026

Global

Descarcă de la 2N Release notes

5 MB

Note de versiune

SHA-256: a6d83a81aa94208b4eafb8f50c0e1d2ba4568514342d147817b0da7971e093d5
Fișier: firmware_2_50_2_2n_access_unit.zip
2N OS version 2.50.2 for 2N IP Access Control Systems includes the following changes
New Functions and Improvements
Added support for new Wiegand module hardware revision.
Essential Corrections
Important bug fixes.
2N OS version 2.50.1 for 2N IP Access Control Systems includes the following changes
Essential Corrections
Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Fixed an issue where the ProfileStateChanged block in Automation functions caused an error after reboot.
Fixed an issue where Access Unit 1.0 was unable to boot for an extended period after power loss.
Updated several internal libraries.
Important bug fixes.
2N OS version 2.50.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.50.x
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
The `snmpget` function now works correctly on devices using SNMPv3.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
Other corrections and fixes.

Versiuni anterioare

Versiune

Data

Regiune

Descărcare și note

V2.50.1Firmware 2.50.1 - 2N Access Unit

02.10.2026

Global

Descarcă de la 2N Release notes

5 MB

Note de versiune

SHA-256: a0c950c96b61b83e2eb69e2f29ef58dcadeb5d3560b8225f4d0820be92a26ef8
Fișier: firmware_2_50_1_2n_access_unit.zip
2N OS version 2.50.1 for 2N IP Access Control Systems includes the following changes
Essential Corrections
Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users.
Fixed an issue where the ProfileStateChanged block in Automation functions caused an error after reboot.
Fixed an issue where Access Unit 1.0 was unable to boot for an extended period after power loss.
Updated several internal libraries.
Important bug fixes.
2N OS version 2.50.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.50.x
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
The `snmpget` function now works correctly on devices using SNMPv3.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
Other corrections and fixes.

V2.50.0Firmware 2.50.0 - 2N Access Unit

02.10.2026

Global

Descarcă de la 2N Release notes

5 MB

Note de versiune

SHA-256: 2ceb66a096f64f11a9e75b04030428149d1415534597d6f6b38b76a10ef9969a
Fișier: firmware_2_50_0_2n_access_unit.zip
2N OS version 2.50.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.50.x
Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Hardware > Audio > Startup and Network States Signalization`.
For security reasons, network settings can no longer be modified using 2N Network Scanner.
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Support for 2N Electronic Locks is now included as part of the standard firmware release.
Essential Corrections
Private keys are no longer exposed via `GET /api/mobilekey/config`.
Updated several internal libraries.
Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection).
Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`.
The `snmpget` function now works correctly on devices using SNMPv3.
Fixed device crashes caused by specific malformed or non-standard ONVIF requests.
Corrected an issue where video resolution could be incorrectly limited when selecting lower bitrate settings for the H.265 codec.
Added a limited-range mode to the WaveKey opening algorithm to prevent unintended door openings from excessive distance.
Other corrections and fixes.

V2.48.0Firmware 2.48.0 - 2N Access Unit - 2N Fortis support · Etichetă regiune: Fortis

02.10.2026

Global

Descarcă de la 2N Release notes

5 MB

Note de versiune

SHA-256: 21a9330cb6044c8f84a8fd7e3353f9ecf64c610c1621b3a98d4e2f891434f4de
Fișier: firmware_2_48_0_2n_access_unit.zip
2N OS version 2.48.0 for 2N IP Access Control Systems includes the following changes
Precautions to be taken during update to FW version 2.48.x
All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating.
Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface.
In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network.
New Functions and Improvements
Support for 2N Electronic Locks with Secure Cards added.
Devices can now generate Certificate Signing Requests (CSR) directly from the web interface under System > Certificates > CSR.
Changing the web interface password now requires entering the current password. As a result, restoring a configuration will no longer change the password. Auto Provisioning can change the password only if the current one is still set to default.
A firewall has been added to ARTPEC-based devices: IP Style, IP Verso 2.0, IP One, Access Unit QR, and IP Force 2.0.
Essential Corrections
Improved certificate handling.
Prevented some certificates from reverting to factory defaults after a software factory reset (without selecting Network Settings), avoiding potential network disconnection.
Removed certain unnecessary syslog messages.
Improved formatting of exported Directory CSV files.
The `UserAuthorized` Automation block now behaves correctly even for failed authorizations.
DNS request lengths can now be up to 255 characters.
RADIUS certificates are now validated properly in EAP-TLS/MSCHAPv2 scenarios.
Commas in the Subject field of the `SendEmail` Automation block no longer cause the subject line to be truncated.
Improved SMTP reliability.
Enhanced handling of large-scale user directory operations.
Important bug fixes.

Specificații 9160347-S

Tip

12V, 1A, PoE 802.3af

PoE

802.3af (Class 0–12.95 W)

LAN

10/100BASE-TX with Auto-MDIX, RJ-45 modular jack, 2N Access Unit Bluetooth has terminal block or pigtail RJ-45

Recommended Cabling

Cat-5e or better

Active Switch Output

8 – 12V, DC, max 600mA

Passive Switch

NO/NC contacts, 30V, 1A, AC, DC

Inputs

2 inputs – in passive / active mode(-30 VDC – + 30 VDC), OFF = open or Uin> 1.5V / ON = short-circuit or Uin< 1.5V, 2N Access Unit Bluetooth has 3 inputs

Tamper Switch

inbuilt

Audio

buzzer, 97dB

Supported Protocols

DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog

Version

compatible with Bluetooth 5.0 LE

Rază de acțiune

short - typically up to 3m, long - typically up to 10m distances should serve only as an approximate guide and may vary depending on the phone model and installation environment

Securitate

RSA-1024 and AES-128encryption

RX Sensitivity

Până la -93dB

Mode

touch, tap in app

Supported Frequencies

125kHz, 13.56MHz

Supported Card Types

card type compatibility depends on Order No.

125 KHz

EM4xxx, HID Prox – versions with 125 kHz support and S in Order No. Only

13.56 MHz

ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (My2N app), Secured MIFARE DESFire EV2/EV3 cards using 2N PICard technology

Secured 13.56 MHz

ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (My2N app), HID SE Seos, iClass, MIFARE SE, reads PACs ID (HID iClass cards with SIO object), Secured MIFARE DESFire EV2/EV3 cards using 2N PICard technology

Technology

capacitive touch technology, high touch layer sensitivity (0.1pF)

Fiabilitate

regular automatic calibration (SmartSence Auto-tunning), does not detect false touches on wet surface

Signalling

configurable backlight intensity, indication using multicoloured LEDs, acoustic response for every keypad touch

Frame

robust zinc cast frame with surface finish (nickel and black color)

Temperatură de funcționare

-40 – 60°C

Temperatură de depozitare

-40 – 70°C