FireProtect 2 SB (Heat/Smoke) Jeweller – Alarmă

Ajax · Alarmă · Fire detectors

FireProtect 2 SB (Heat/Smoke) Jeweller – specificații și firmware

FireProtect 2 (Heat/Smoke) Jeweller

Ajax nu publică un fișier de firmware pentru acest model.

Înainte de actualizare: verifică pe eticheta aparatului modelul exact și versiunea hardware și folosește firmware-ul din regiunea aparatului (de exemplu Global sau Europa). Un firmware greșit poate bloca aparatul. Nu întrerupe alimentarea în timpul actualizării.

Modelul FireProtect 2 SB (Heat/Smoke) Jeweller face parte din gama Ajax, categoria „Fire detectors”.

În catalogul Ajax apare ca „FireProtect 2 (Heat/Smoke) Jeweller”. Aparatul cântărește 272 g și are dimensiunile 124 × 124 × 45 mm.

Nu există un firmware public de la Ajax pentru FireProtect 2 SB (Heat/Smoke) Jeweller. Mai jos scrie cum se actualizează.

Specificațiile complete, cu etichetele traduse în română, sunt în tabelul de mai jos.

Cum se actualizează FireProtect 2 SB (Heat/Smoke) Jeweller

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații FireProtect 2 SB (Heat/Smoke) Jeweller

Variante

FireProtect 2 RB (Heat/Smoke) Jeweller	FP2.RBHS.J — specificațiile de mai jos
FireProtect 2 SB (Heat/Smoke) Jeweller	FP2.SBHS.J

Comunicație

Tehnologie de comunicație Jeweller	Proprietary wireless technology for transmission of alarms and events. Features: - Two-way communication. - Protection against device spoofing. - Block encryption featuring a floating key. - Instant notifications. - Remote configuration via the Ajax apps.
Radio frequency bands	866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz Depends on the region of sale.
Putere maximă radiată (ERP)	Până la 20 mW Automatic power control to reduce power consumption and radio interference.
Modulație semnal radio	GFSK
Rază de comunicație radio	Până la 1,700 m Between the detector and a hub (or radio signal range extender) in an open space.
Encryption of radio communication	All the data stored and transmitted are protected by block encryption with a floating key.
Radio frequency hopping	To prevent radio interference and jamming.

Sensitive elements

	smoke sensor
	heat sensor

Smoke detection

Element sensibil	double-spectrum optical sensor Recognizes smoke by the size of particles in the air.
Protection from false alarms	Does not react to water vapor.
Patented smoke chamber	Protects the smoke sensor from dust, dirt, and insects.

Detecție temperatură periculoasă

Element sensibil	according to the requirements for Class A1R heat detectors Requirements of EN 54-5 and BS 5446-2 standards.
High temperature alarm	at temperatures above 64°C
Temperature spike alarm	when the temperature rises more than 10°C in 1 minute or less

Funcții suplimentare

In-built siren	volume 85 dB at a distance of 3 meters Sound notification of alarms. Active until the reason for triggering is eliminated or until the user disables notification.
Interconnected fire detectors alarms	via primary interconnection If one of the fire detectors in the system detects a threat, it sends an alarm to the hub. Within 20 seconds, the hub initiates an interconnected alarm and sends data to Ajax apps. via fallback interconnection1 At the same time with notifying the hub, the initiating detector sends an alarm directly to other detectors. All connected detectors activate the buzzer within a minute. It will work even in the worst-case scenario of losing connection with the hub. 1 Fallback interconnected alarm is available only for FireProtect 2 detectors with firmware version 5.59.2.ХХ or later. Devices that support the fallback interconnected alarm are marked on the package with a “Fallback interconnect supported” label.
LED indication	green is a power indication A LED indicator on the device enclosure lights up once every 56 seconds. The indication meets the requirements of EN 50291. yellow is an indication of malfunctions A LED indicator on the device enclosure lights up when malfunctions are detected. For example, in the case of discharged batteries, contamination of the smoke chamber, or end of the service life. red is an indication of fire alarms A LED indicator on the device enclosure lights up when the detector registers a fire alarm.
Button on the front panel of the detector	In normal mode, when pressed, it starts the smoke chamber test. In the event of an alarm or malfunction, the pressing turns off the detector sound notification.

Recomandări

	The device is designed only for indoor installation. SmartBracket mounting panel allows adjusting the position of the detector after installation.

Anti-sabotage protection

Tampering alarm	Alerts of attempts to detach the detector from the surface or remove the mounting panel.
Protecție anti-spoofing	Autentificare dispozitiv
Detection of communication failure	within 15 minutes The time to detect communication loss depends on the settings for the number of undelivered data packages (specified in the Jeweller or Jeweller/Fibra settings). The polling interval is fixed at 300 seconds.

Alimentare

For FireProtect 2 RB (Heat/Smoke)	2 × CR123A battery Până la 7 years of battery life.

Carcasă

Dimensiuni	124 × 124 × 45 mm
Greutate	272 g
Interval temperatură de funcționare	from 0°С to +50°С
Umiditate de funcționare	Până la 80%
Clasă de protecție	IP20

Culori

	Negru
	Alb

Conținut set

	FireProtect 2 RB (Heat/Smoke) Jeweller
	SmartBracket mounting panel
	Kit de montaj
	2 × CR123A battery (pre-installed)
	Ghid de pornire rapidă

Standarde și certificări

Construction Products Regulation (CPR)	EN 14604:2005/AC:2008 Dedal Attestation & Certification LTD
Directiva RED	EN 300 220-1 V3.1.1 EN 300 220-2 V3.2.1 Certificate issued by MiCOM Labs
Directiva RoHS	EN IEC 63000:2018 Shenzhen NTEK Testing Technology Co.
Directiva EMC	EN 301 489-1 V2.2.3 EN 301 489-3 V2.1.1 Certificate issued by MiCOM Labs
Directiva de joasă tensiune (LVD)	EN 62479:2010 EN 62368-1:2014+A11:2017 Certificate issued by MiCOM Labs
CSA	ANSI/UL 62368-1 Ed. 3 CSA C22.2 No. 62368-1:19 Ed. 3 Certificate issued by CSA Group Testing & Certification Inc.
ID FCC	2AX5VFISMHTJ1 Certification Issued Under the Authority of the Federal Communications Commission
ID IC	26860-FISMHTJ1 Certificate issued by MiCOM Labs
PSTI UK	Schedule 1

Compatibil cu

Hub (2G) Jeweller, Hub (4G) Jeweller, Hub 2 (2G) Jeweller, Hub 2 (4G) Jeweller, Hub 2 Plus Jeweller, Hub BP Jeweller, Hub BP Jeweller (without casing), ReX 2 Jeweller, ReX Jeweller, Superior Hub G3 Jeweller, Superior Hub Hybrid (2G), Superior Hub Hybrid (4G), Superior Hub Hybrid (4G) (without casing), Superior Hub Hybrid 2, Superior Hub Hybrid 2 (without casing), Superior MegaHub, Superior MegaHub (without casing), Superior ReX G3 Jeweller

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.