Modelul EN54 FireProtect (Smoke) Jeweller face parte din gama Ajax, categoria „Fire detectors”.

Din fișa tehnică reținem: funcționare între 0 și +50 °C. Fizic, cântărește 278 g și are dimensiunile 124 × 124 × 48 mm.

Nu există un firmware public de la Ajax pentru EN54 FireProtect (Smoke) Jeweller. Mai jos scrie cum se actualizează.

Mai jos găsești fișa tehnică completă, tradusă în română.

Cum se actualizează EN54 FireProtect (Smoke) Jeweller

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații EN54 FireProtect (Smoke) Jeweller

EN54 FireProtect (Heat/Sounder) Jeweller

FP.54HA.J — specificațiile de mai jos

EN54 FireProtect (Smoke/Sounder) Jeweller

FP.54SA.J

EN54 FireProtect (Smoke) Jeweller

FP.54S.J

EN54 FireProtect (Heat) Jeweller

FP.54H.J

EN54 FireProtect (Heat/Smoke) Jeweller

FP.54HS.J

Tehnologie de comunicație Jeweller

Proprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.

Benzi de frecvență

866.0–866.5 MHz
868.0–868.6 MHz
868.7–869.2 MHz
905.0–926.5 MHz
915.85–926.5 MHz
921.0–922.0 MHz
Depends on the sales region.

Putere maximă radiată (ERP)

Până la 20 mW
Automatic power control to reduce power consumption and radio interference.

Modulație semnal radio

GFSK

Rază de comunicație radio

Până la 1,700 m
Between the device and control and indicating equipment (CIE) or a range extender in an open space.

Comunicație criptată

All stored and transmitted data is protected by block encryption featuring a dynamic key.

Salt de frecvență

To prevent radio interference and jamming.

Element sensibil

2 × thermistor
According to the EN 54-5 requirements for heat detectors of Class A1, B, and C with rate-of-rise (R) and static (S) response types.

Heat sensor modes

- A1, A1R, A1S
- B, BR, BS
- C, CR, CS
- Fixed temperature
For better detection of fire hazards, depending on the installation site of the device. Can be selected in the device settings. Only the following heat sensor modes are compliant with EN 54 requirements: A1R, A1S, BR, BS, CR, and CS.

Alarm type

acoustic

Sound volume

At a distance of 1 m
- Tone 1: 970 Hz — min 66, max 82 dB
- Tone 2: 800 Hz / 970 Hz @ 2 Hz — min 66, max 86 dB
- Tone 3: 800–970 Hz @ 1 Hz — min 73, max 89 dB
- Tone 6: 554 Hz, 0.1 s / 440 Hz, 0.4 s — min 69, max 87 dB
- Tone 7: 500–1200 Hz, 3.5 s / 0.5 s OFF — min 80, max 87 dB
- Tone 13: 1200–500 Hz @ 1 Hz — min 75, max 86 dB
Adjusted by a PRO or user with admin rights in an Ajax app.

Current consumption in alarm mode

250 mA

Sound pattern

32 tones

Sound synchronization

An audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.

Alarm annunciation test

An audible alarm check to ensure the fire alarm is clearly audible on the premises.

The device is designed for indoor use only.

The SmartBracket mounting panel allows the detector to be rotated up to 90° even after installation.

Tamper button

Fault notification when an attempt is made to remove the device from the mounting panel.

Lock for SmartBracket

to secure the device on the SmartBracket mounting panel
When locked, the lock secures the device and prevents it from being removed without a special tool.

Protecție anti-spoofing

Autentificare dispozitiv

Connection loss detection

after 36 s
Detection time depends on Jeweller settings.

Baterie

2 × CR123A
Pre-installed.

Tool-free battery replacement

To replace the batteries, open the lids of the battery compartments.

Reverse polarity protection

Prevents device damage if the batteries are put in incorrectly.

Recommended battery type

Huiderui CR123A; 3 V; 1,600 mAh, LiMnO₂

Autonomie estimată a bateriei

Până la 5 years

Dimensiuni

124 × 124 × 48 mm

Greutate

278 g

Interval temperatură de funcționare

from 0 °C – +50 °C

Umiditate de funcționare

Până la 80%

Clasă de protecție

IP21C

Flammability rating

UL 94 V-0

Negru

Alb

EN54 FireProtect (Heat/Sounder) Jeweller

SmartBracket mounting panel

2 × CR123A battery (pre-installed)

Kit de montaj

Ghid de pornire rapidă

Directiva RED

ETSI EN 300 220-1 V3.1.1
ETSI EN 300 220-2 V3.2.1
Certificate issued by TIMCO Engineering, Inc.

Directiva RoHS

EN IEC 63000:2018
Test report issued by Shenzhen NTEK Testing Technology Co.

Directiva de joasă tensiune (LVD)

EN 62311:2020
EN IEC 62368-1:2024+A11:2024
Certificate issued by TIMCO Engineering, Inc.

Directiva EMC

ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-3 V2.3.2
EN 55032:2015+A1:2020
EN 55035:2017+A11:2020
Certificate issued by TIMCO Engineering, Inc.

PSTI UK

Schedule 1

Compliance with the Law of Ukraine “On the Provision of Construction Products on the Market”

DSTU EN 54-25:2010 with amendment No. 1:2019 (EN 54-25:2008/AC:2012, IDT)
DSTU EN 54-5:2019 (EN 54-5:2017 + A1:2018, IDT)
DSTU EN 54-3:2003 with amendment No. 2:2012 (EN 54-3:2001/A2:2006, IDT)
DSTU EN 54-13:2022
Certificate issued by the State Certification Center of the SES of Ukraine

BOSEC

B-9382-FD-1104
Certificate issued by BOSEC brand committee and ANPI asbl / vzw

DBI Certification

232.304
Certificate issued by DBI Certification A/S

Swedish Rules for fire alarms SBF 110:8

№ 26-275
№ 26-276
Certificate issued by SVENSK BRAND- OCH SÄKERHETSCERTIFIERING

UAE SoC

Certificate issued by Dedal Attestation & Certification LTD

Compatibility and connectability assessment of system components

EN 54-13:2017+A1:2019
Certificate issued by Dedal Attestation & Certification LTD

СNBOP-PlB

Nr 6137/2026
Certificate issued by Centrum Naukowo-Badawcze Ochrony Przeciwpożarowej im․ Józefa Tuliszkowskiego – Państwowy Instytut Badawczy