Suceava — livrare în toată România Zilnic 08:00–17:00 Locație 0751 478 912
EN54 FireProtect (Heat/Sounder) Jeweller – Alarmă
Ajax · Alarmă · Fire detectors

EN54 FireProtect (Heat/Sounder) Jeweller – specificații și firmware

EN54 FireProtect Jeweller detectors

Ajax nu publică un fișier de firmware pentru acest model.
Înainte de actualizare: verifică pe eticheta aparatului modelul exact și versiunea hardware și folosește firmware-ul din regiunea aparatului (de exemplu Global sau Europa). Un firmware greșit poate bloca aparatul. Nu întrerupe alimentarea în timpul actualizării.

EN54 FireProtect (Heat/Sounder) Jeweller este o componentă de sistem de alarmă Ajax din categoria „Fire detectors”.

Câteva date tehnice importante: funcționare între 0 și +50 °C. Ca gabarit, cântărește 278 g și are dimensiunile 124 × 124 × 48 mm.

Pentru EN54 FireProtect (Heat/Sounder) Jeweller, Ajax nu oferă un fișier de firmware descărcabil. Mai jos scrie cum se actualizează.

Mai jos găsești fișa tehnică completă, tradusă în română.

Cum se actualizează EN54 FireProtect (Heat/Sounder) Jeweller

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații EN54 FireProtect (Heat/Sounder) Jeweller

Variante

EN54 FireProtect (Heat/Sounder) JewellerFP.54HA.J — specificațiile de mai jos
EN54 FireProtect (Smoke/Sounder) JewellerFP.54SA.J
EN54 FireProtect (Smoke) JewellerFP.54S.J
EN54 FireProtect (Heat) JewellerFP.54H.J
EN54 FireProtect (Heat/Smoke) JewellerFP.54HS.J

Comunicație

Tehnologie de comunicație JewellerProprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.
Benzi de frecvență866.0–866.5 MHz
868.0–868.6 MHz
868.7–869.2 MHz
905.0–926.5 MHz
915.85–926.5 MHz
921.0–922.0 MHz
Depends on the sales region.
Putere maximă radiată (ERP)Până la 20 mW
Automatic power control to reduce power consumption and radio interference.
Modulație semnal radioGFSK
Rază de comunicație radioPână la 1,700 m
Between the device and control and indicating equipment (CIE) or a range extender in an open space.
Comunicație criptatăAll stored and transmitted data is protected by block encryption featuring a dynamic key.
Salt de frecvențăTo prevent radio interference and jamming.

Detecție temperatură periculoasă

Element sensibil2 × thermistor
According to the EN 54-5 requirements for heat detectors of Class A1, B, and C with rate-of-rise (R) and static (S) response types.
Heat sensor modes- A1, A1R, A1S
- B, BR, BS
- C, CR, CS
- Fixed temperature
For better detection of fire hazards, depending on the installation site of the device. Can be selected in the device settings. Only the following heat sensor modes are compliant with EN 54 requirements: A1R, A1S, BR, BS, CR, and CS.

Alarm annunciation

Alarm typeacoustic
Sound volumeAt a distance of 1 m
- Tone 1: 970 Hz — min 66, max 82 dB
- Tone 2: 800 Hz / 970 Hz @ 2 Hz — min 66, max 86 dB
- Tone 3: 800–970 Hz @ 1 Hz — min 73, max 89 dB
- Tone 6: 554 Hz, 0.1 s / 440 Hz, 0.4 s — min 69, max 87 dB
- Tone 7: 500–1200 Hz, 3.5 s / 0.5 s OFF — min 80, max 87 dB
- Tone 13: 1200–500 Hz @ 1 Hz — min 75, max 86 dB
Adjusted by a PRO or user with admin rights in an Ajax app.
Current consumption in alarm mode250 mA
Sound pattern32 tones
Sound synchronizationAn audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.
Alarm annunciation testAn audible alarm check to ensure the fire alarm is clearly audible on the premises.

Recomandări de montaj

The device is designed for indoor use only.
The SmartBracket mounting panel allows the detector to be rotated up to 90° even after installation.

Protecție anti-sabotaj

Tamper buttonFault notification when an attempt is made to remove the device from the mounting panel.
Lock for SmartBracketto secure the device on the SmartBracket mounting panel
When locked, the lock secures the device and prevents it from being removed without a special tool.
Protecție anti-spoofingAutentificare dispozitiv
Connection loss detectionafter 36 s
Detection time depends on Jeweller settings.

Alimentare

Baterie2 × CR123A
Pre-installed.
Tool-free battery replacementTo replace the batteries, open the lids of the battery compartments.
Reverse polarity protectionPrevents device damage if the batteries are put in incorrectly.
Recommended battery typeHuiderui CR123A; 3 V; 1,600 mAh, LiMnO₂
Autonomie estimată a baterieiPână la 5 years

Carcasă

Dimensiuni124 × 124 × 48 mm
Greutate278 g
Interval temperatură de funcționarefrom 0 °C – +50 °C
Umiditate de funcționarePână la 80%
Clasă de protecțieIP21C
Flammability ratingUL 94 V-0

Culoare

Negru
Alb

Conținut set

EN54 FireProtect (Heat/Sounder) Jeweller
SmartBracket mounting panel
2 × CR123A battery (pre-installed)
Kit de montaj
Ghid de pornire rapidă

Revizie

3

Standarde și certificări

Directiva REDETSI EN 300 220-1 V3.1.1
ETSI EN 300 220-2 V3.2.1
Certificate issued by TIMCO Engineering, Inc.
Directiva RoHSEN IEC 63000:2018
Test report issued by Shenzhen NTEK Testing Technology Co.
Directiva de joasă tensiune (LVD)EN 62311:2020
EN IEC 62368-1:2024+A11:2024
Certificate issued by TIMCO Engineering, Inc.
Directiva EMCETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-3 V2.3.2
EN 55032:2015+A1:2020
EN 55035:2017+A11:2020
Certificate issued by TIMCO Engineering, Inc.
PSTI UKSchedule 1
Compliance with the Law of Ukraine “On the Provision of Construction Products on the Market”DSTU EN 54-25:2010 with amendment No. 1:2019 (EN 54-25:2008/AC:2012, IDT)
DSTU EN 54-5:2019 (EN 54-5:2017 + A1:2018, IDT)
DSTU EN 54-3:2003 with amendment No. 2:2012 (EN 54-3:2001/A2:2006, IDT)
DSTU EN 54-13:2022
Certificate issued by the State Certification Center of the SES of Ukraine
BOSECB-9382-FD-1104
Certificate issued by BOSEC brand committee and ANPI asbl / vzw
DBI Certification232.304
Certificate issued by DBI Certification A/S
Swedish Rules for fire alarms SBF 110:8№ 26-275
№ 26-276
Certificate issued by SVENSK BRAND- OCH SÄKERHETSCERTIFIERING
UAE SoCCertificate issued by Dedal Attestation & Certification LTD
Compatibility and connectability assessment of system componentsEN 54-13:2017+A1:2019
Certificate issued by Dedal Attestation & Certification LTD
СNBOP-PlBNr 6137/2026
Certificate issued by Centrum Naukowo-Badawcze Ochrony Przeciwpożarowej im․ Józefa Tuliszkowskiego – Państwowy Instytut Badawczy

Compatibil cu

EN54 Fire Hub Jeweller, EN54 Fire ReX Jeweller

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.

Documente oficiale

Denumiri și variante: EN54 FireProtect (Heat/Sounder), EN54 FireProtect Heat Sounder, FP.54HA.J

Modele din aceeași serie

Caută alt model