Firmware X-Station 2

Build No. 1.4.1_260416
Caution
Devices with firmware v1.4.0 or later cannot be downgraded to versions earlier than v1.4.0.
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor.
For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version.
Devices with existing SE processor can be downgraded to a lower version.
For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
Supported an option to select QR authentication using the device camera upon Camera QR license activation on XS2-QDPB and XS2-QAPB models.
Supported EV2 Secure Messaging authentication and issuance for DESFire EV2 and EV3 cards.
Improved log display for unsupported events and errors on the device.
Supported connecting the XPass Q2 model as a slave device.
Separated firmware builds for CE and Global (Non-CE) products.
CE and Global (Non-CE) products can be identified via the label sticker on the back of the product. The Master Admin feature is enabled only on products with a label bearing the CE mark .
Bug Fixes
Device rebooting when activating an invalid license file. Affects version :  1.2.0
Camera QR not working after applying license to a slave device. Affects version :  1.2.0

Build No. 1.4.0_251128
Caution
Devices with firmware v1.4.0 or later cannot be downgraded to versions earlier than v1.4.0.
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor.
For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version.
Devices with existing SE processor can be downgraded to a lower version.
For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
Supports the Master Admin setting, which grants full administrator privileges.
Reflects global cybersecurity standards and the latest security requirements.
Improved to distinguish devices that support the Server Private Message feature.
Added identification code to support recognition of the latest cards.
- DESFire EV3
Improved to distinguish devices that support the Secure Tamper feature.
Improved time synchronization behavior between server and devices.
Supports not logging events when the Ignore Repeated Signals Duration feature is activated.
Bug Fixes
Arm/Disarm actions did not operate correctly on specific Supervised Input port of the DM-20 connected as a slave. Affects version :  1.0.0
Wiegand format card data of 25 bits or less is not recognized. Affects version :  1.0.0
Issue where ARM is displayed in English despite using a translated custom language. Affects version :  1.3.1
Issue when attempting Reconnect on a device configured in Trigger & Action to deactivate upon disconnection from BioStar 2. Affects version :  1.0.0
Logs 'BioStar 2 Disconnected' and 'Device Locked' are repeatedly generated.
The device fails to reconnect to the server after the connection is lost.
Authentication-failure popup is significantly delayed when OK is selected without entering a PIN on the slave device’s PIN authentication screen. Affects version :  1.0.0
When the card ID of an issued smart card is 32 digits, the card data is not correctly recognized during authentication with a Wiegand reader. Affects version :  1.0.0
Card recognition intermittently fails when QR code reading mode is enabled. Affects version :  1.0.0

Build No. 1.3.2_251127
Caution
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor. For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version. Devices with existing SE processor can be downgraded to a lower version. For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
- Improved display output stability.

Build No. 1.3.1_250120
Caution
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor. For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version. Devices with existing SE processor can be downgraded to a lower version. For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
Improved QR authentication performance.
Supports Template on Mobile BLE.
Improved to get user update succeeded event log using the GetLogWithFilter function in the SDK.
Improved to ensure that values set with osdp_comset are correctly applied on the device connected as a slave.
Supports the Auth Result Display Option that allows you to select how the user ID and name are displayed on the authentication result screen of the device.
User ID Display
User Name Display
Added an option to enable or disable the Scramble Keypad , which randomizes the position of numeric keys when entering a PIN.
- AUTHENTICATION → Scramble Keypad
Improved the convenience of the authentication process in an environment using multi factor authentication with QR code + PIN.
Improved RS-485 communication quality.
Supports feature to set the baud rate of slave devices.
Bug Fixes
When the Reset Time for Timed Anti PassBack is set to 0, anti-passback does not work. Affects version :  1.0.0
When a QR code containing unsupported characters is authenticated on the device, the User ID is displayed incorrectly in the EVENT LOG. Affects version :  1.3.0
When a QR code with large data is authenticated on the device, the User ID is not displayed in the EVENT LOG. Affects version :  1.0.0
When the device log is full and a new event occurs, unintended logs are retrieved with the newly generated event. Affects version :  1.0.0
Calling the BS2_GetDeviceCapabilities function on a slave device connected via RS-485 outputs incorrect values. Affects version :  1.0.0
When the device is restarted with the Primary Key set only in the Suprema Smart Card Layout and the Secondary Key set only in the Custom Smart Card Layout , the device recognizes the Custom Smart Card as a CSN card. Affects version :  1.3.0
When authenticating with a barcode using the camera, the barcode is not authenticated, and only a beep sound plays. Affects version :  1.0.0
Custom smart cards with the DESFire Advanced option enabled fail to be recognized. Affects version :  1.3.0
Some smart cards fail to be recognized in environments using the new SE chip firmware. Affects version :  1.1.4
DESFire smart cards with the Custom Smart Card Layout set to Secondary Key are recognized as CSN cards. Affects version :  1.3.0
The master device restarts abnormally after 31 slave devices are connected. Affects version :  1.0.0
After a firmware upgrade, authentication failure occurs with the previously used cards. Affects version :

Build No. 1.3.0_240318
Caution
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor. For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version. Devices with existing SE processor can be downgraded to a lower version. For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
Extended the user expiration period to a maximum of ' 2037-12-31 '.
Supports Custom Smart Card Layout .
Supports the Display Result from Controller feature for displaying authentication success or failure results from a 3rd party controller on the device screen when using Intelligent Slave .
XPass D2 new BLE (Bluetooth Low Energy) chip firmware (Build No. 1.7.0_220921) support.
- The BLE chip parts of the hardware have been changed, and the firmware has been upgraded to be compatible with both the existing and new BLE chips.
Supports the Ignore Repeated Signals Duration feature, which ignores repetitive authentication signals from the controller when the device is connected to a 3rd party controller via Wiegand.
Face Detection feature is deprecated.
Added event code for QR authentication.
Improved synchronization to complete if user enrollment fails when synchronizing multiple users to the device in BioStar 2.
Improved duplicate fingerprint detection.
Improved pop-up message displayed when moving to another screen after entering the license menu.
Bug Fixes
The device fails to connect via OSDP with the 3rd party control panel. Affects version :  1.1.0
When authenticating while SmartCard Byte Order is set to LSB , the smart card ID outputs incorrect values, and the device restarts abnormally. Affects version :  1.2.0
Device does not recognize certain MIFARE Classic cards. Affects version :  1.0.0
When authenticating with the QR Code issued to the user while Use QR as Card is activated, incorrect BitCount and CardData get transferred via OSDP. Affects version :  1.2.0
Authentication fails when authenticating with a DESFire AoC while the device is connected as a slave. Affects version :  1.0.0
When Relay is set in the device menu, the door does not open with a mobile card. Affects version :  1.0.0
The user ID stored as a 32-character string is truncated to only 31 characters in a specific event log. Affects version :  1.0.0
When authenticating in T&A Mode with Server Private Msg. or Device Private Msg. enabled, the set private message is displayed incorrectly. Affects version :  1.0.0
When a user with a 32-character user ID authenticates to the device while the device is not connected to the server, the authentication event log is not updated in BioStar 2 even after the device is reconnected to the server. Affects version :  1.0.0
The camera of the device authenticates QR codes even while the device is locked. Affects version :  1.2.0
If the

Build No. 1.2.3_230926
Caution
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor. For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version. Devices with existing SE processor can be downgraded to a lower version. For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
- Improved to not recognize SEOS configuration cards as CSN for 1 minute after device booting.
Bug Fixes
Fixed smartcard output byte order setting. Affects version :  1.2.1
- When using Wiegand or OSDP output, it is fixed to be affected by the smartcard output byte order when the Wiegand output information is set to send user ID.
Device does not recognize certain HID iCLASS Seos cards. Affects version :  1.0.0
The device turns off when the user Format Card in BioStar 2. Affects version :  1.0.0
When the device with the working Screen Saver is not used for a long time, a black screen occurs and the device freezes. Affects version :  1.0.0
Restart log is not logged in the device's Event Log when the master device is restarted. Affects version :  1.2.0
QR authentication does not work on a device that has been using QR/Barcode authentication for a certain period of time (about 49 days or more). Affects version :  1.2.0
Device abnormally restarts when changing the device's Network settings in BioStar 2. Affects version :  1.0.0
When the LAN cable connected to the device is disconnected and reconnected, it takes a long time for IP to be assigned by DHCP. Affects version :  1.2.0

Build No. 1.2.2_230602
Caution
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor. For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version. Devices with existing SE processor can be downgraded to a lower version. For more information, check the serial number of the device and contact the Suprema .
Bug Fixes
Device abnormally restarts when Image Log is Enabled and image log is logged on the device. Affects version :  1.2.0
When authenticating with a BLE mobile card running on iOS, authentication fails and the device restarts intermittently. Affects version :  1.0.0

Build No. 1.2.1_230418
Caution
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor. For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version. Devices with existing SE processor can be downgraded to a lower version. For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
Separated event code for QR authentication.
Improved smartcard output byte order setting.
- When using Wiegand or OSDP output, it is improved to be affected by the smartcard output byte order even when the Wiegand output information is as the user ID.
Bug Fixes
If the door uses the slave device relay, the door does not open even if authentication succeeds. Affects version :  1.0.0
Device restarts when camera QR authentication using a QR code with large data. Affects version :  1.2.0
Door Locked event occurs when input signal gets detected while configured to Arm/Disarm by input signal. Affects version :  1.0.0
Device does not recognize certain HID iCLASS Seos cards. Affects version :  1.0.0

Build No. 1.2.0_221209
Caution
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor. For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version. Devices with existing SE processor can be downgraded to a lower version. For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
Supports activating licenses for use of specific features on devices.
Supports QR code recognition and authentication using the camera.
Supports setting the byte order for smart cards.
- Supports setting the byte order of data to be output to Wiegand or OSDP.
Separated the log related to the cause of the door unlock.
Door open request by exit button
Door open request by operator
Added relay deactivation option for exit button input.
- Added the option to set the door open request log to occur but the relay not to operate when the exit button is pressed.
Added the Use QR as card option.
- Supports selecting whether to allow authentication when the QR data scanned by the device is the same as the card data issued to the user.
Improved to select and update only the desired information when updating user information.
Improved the font size of the toast message.
Bug Fixes
Global APB behavior for the same input was different depending on firmware version. Affects version :  1.0.0
When communicating with a 3rd party control panel via OSDP, the device does not respond to the Device Capabilities command. Affects version :  1.0.0
When communicating with a 3rd party control panel via OSDP, the device incorrectly responds as 'Inactive' when receiving the Input Status Request command while the input port is grounded. Affects version :  1.0.0
When communicating with a 3rd party control panel via OSDP, the device does not respond to the Output Status Report command while the relay reacts to it. Affects version :  1.0.0
When communicating with a 3rd party control panel via OSDP, the device incorrectly responds as 'Inactive' when receiving the Output Status Request command while the relay status is 'On'. Affects version :  1.0.0
Deleting all users included in an access group in BioStar 2 does not delete the access group from the device's user information. Affects version :  1.0.0
When using the card to authenticate to the device, the card that was normally authenticated fails intermittently. Affects version :  1.0.0
Improved the structure to prevent authentication fail caused by broken database or cache memory. Affects version :  1.0.0
User name, ID, and message overlap when applying Device Private Msg. using SDK. Affects version :  1.0.0

Build No. 1.2.0_221209
Caution
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor. For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version. Devices with existing SE processor can be downgraded to a lower version. For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
Supports activating licenses for use of specific features on devices.
Supports QR code recognition and authentication using the camera.
Supports setting the byte order for smart cards.
- Supports setting the byte order of data to be output to Wiegand or OSDP.
Separated the log related to the cause of the door unlock.
Door open request by exit button
Door open request by operator
Added relay deactivation option for exit button input.
- Added the option to set the door open request log to occur but the relay not to operate when the exit button is pressed.
Added the Use QR as card option.
- Supports selecting whether to allow authentication when the QR data scanned by the device is the same as the card data issued to the user.
Improved to select and update only the desired information when updating user information.
Improved the font size of the toast message.
Bug Fixes
Global APB behavior for the same input was different depending on firmware version. Affects version :  1.0.0
When communicating with a 3rd party control panel via OSDP, the device does not respond to the Device Capabilities command. Affects version :  1.0.0
When communicating with a 3rd party control panel via OSDP, the device incorrectly responds as 'Inactive' when receiving the Input Status Request command while the input port is grounded. Affects version :  1.0.0
When communicating with a 3rd party control panel via OSDP, the device does not respond to the Output Status Report command while the relay reacts to it. Affects version :  1.0.0
When communicating with a 3rd party control panel via OSDP, the device incorrectly responds as 'Inactive' when receiving the Output Status Request command while the relay status is 'On'. Affects version :  1.0.0
Deleting all users included in an access group in BioStar 2 does not delete the access group from the device's user information. Affects version :  1.0.0
When using the card to authenticate to the device, the card that was normally authenticated fails intermittently. Affects version :  1.0.0
Improved the structure to prevent authentication fail caused by broken database or cache memory. Affects version :  1.0.0
User name, ID, and message overlap when applying Device Private Msg. using SDK. Affects version :  1.0.0

Build No. 1.1.4_220805
Caution
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor. For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version. Devices with existing SE processor can be downgraded to a lower version. For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
Improved the OSDP ID to also be deleted when a security tamper occurs on the X-Station 2 connected as a slave device.
Supports the dual SE processor.
Bug Fixes
When the LAN cable connected to the device is disconnected and reconnected, it takes a long time for IP to be assigned by DHCP. Affects version :  1.0.0
Intermittent Mobile Card not authenticating. Affects version :  1.0.0
- Improved BLE Micom Firmware and BLE Recovery RFCore.
Master device reboots when you modify the number of Floor in a Zone → Scheduled Unlock. Affects version :  1.0.0
The modification is not applied when setting the Intelligent Slave-related settings in the detailed information of registered devices in BioStar 2. Affects version :  1.1.2
- Intelligent Slave: A function that enables 1:1 or 1 :N matching directly from the Suprema device and transmits the authentication result as OSDP card data to the third-party controller.
Recently issued iClass Seos card from HID not recognized by device. Affects version :  1.0.0
Device reboots when card is continuously authenticated. Affects version :  1.0.0

Build No. 1.1.4_220805
Caution
XS2-APB, XS2-QAPB and XS2-OAPB types of X-Station 2 model support HID iClass card type through SE processor. For devices with the new SE processor, after upgrading the firmware to v1.1.4 or higher, you cannot downgrade to a lower version and downgrade the firmware customized in the lower version. Devices with existing SE processor can be downgraded to a lower version. For more information, check the serial number of the device and contact the Suprema .
New Features and Improvements
Improved the OSDP ID to also be deleted when a security tamper occurs on the X-Station 2 connected as a slave device.
Supports the dual SE processor.
Bug Fixes
When the LAN cable connected to the device is disconnected and reconnected, it takes a long time for IP to be assigned by DHCP. Affects version :  1.0.0
Intermittent Mobile Card not authenticating. Affects version :  1.0.0
- Improved BLE Micom Firmware and BLE Recovery RFCore.
Master device reboots when you modify the number of Floor in a Zone → Scheduled Unlock. Affects version :  1.0.0
The modification is not applied when setting the Intelligent Slave-related settings in the detailed information of registered devices in BioStar 2. Affects version :  1.1.2
- Intelligent Slave: A function that enables 1:1 or 1 :N matching directly from the Suprema device and transmits the authentication result as OSDP card data to the third-party controller.
Recently issued iClass Seos card from HID not recognized by device. Affects version :  1.0.0
Device reboots when card is continuously authenticated. Affects version :  1.0.0

Build No. 1.1.3_220225
Bug Fixes
The QR/Barcode scan guidance message on screen operated differently from QR/Barcode Scan Timeout setting (XS2-QAPB, XS2-QDPB). Affects version :  1.0.0
When authenticated using fingerprints, the relay did not work as set in the device menu (XS2-OAPB, XS2-ODPB). Affects version :  1.1.0
When the dual authentication was set on the device, if the fake fingerprint was used in the second authentication, a screen unrelated to the situation was output after authentication failure (XS2-OAPB, XS2-ODPB). Affects version :  1.1.0
Image logs were taken abnormally in an environment where the device is exposed to strong light. Affects version :  1.0.0

Build No. 1.1.3_220225
Bug Fixes
The QR/Barcode scan guidance message on screen operated differently from QR/Barcode Scan Timeout setting (XS2-QAPB, XS2-QDPB). Affects version :  1.0.0
When authenticated using fingerprints, the relay did not work as set in the device menu (XS2-OAPB, XS2-ODPB). Affects version :  1.1.0
When the dual authentication was set on the device, if the fake fingerprint was used in the second authentication, a screen unrelated to the situation was output after authentication failure (XS2-OAPB, XS2-ODPB). Affects version :  1.1.0
Image logs were taken abnormally in an environment where the device is exposed to strong light. Affects version :  1.0.0

Build No. 1.1.2_211220
New Features and Improvements
Improved QR/Barcode reading performance.
Improved the speed at which the device recognizes objects.
Supports LCDs from multiple manufactures.
Bug Fixes
The device rebooted abnormally when a user scanned a card on the device with several cards overlapped in a wallet or the like. Affects version :  1.0.0
When setting the elevator to the scheduled unlock zone and using the 'Started by User Authentication' option, the floor is activated normally when a user belonging to the access group authenticates, but the 'Floor released' logs are output. Affects version :  1.0.0
Improved to check for the duplication of cards registered with users when transmitting user data from the server to devices. Affects version :  1.0.0
The master device reboots if re-searching the slave device while RS-485 communication is operating normally. Affects version :  1.0.0
String resources were not updated when upgrading firmware. Affects version :  1.0.0
PIN authentication did not work properly when using Device Hashkey Management. Affects version :  1.0.0
When loading the logs for the user who entered the admin menu using the SDK, the user ID was not displayed. Affects version :  1.0.0
The device failed to recognize the iCLASS Seos card suddenly (XS2-APB, XS2-QAPB, XS2-OAPB). Affects version :  1.0.0
When authenticating on a device that has dual authentication set up, the authentication success sound is not output for the dual authentication result, and the home screen is maintained. Affects version :  1.0.0
Slave devices are disconnected when the master device is rebooted. Affects version :  1.0.0
Even though the device's language was set to Korean, some phrases were displayed on the screen in English. Affects version :  1.0.0
The device reboots abnormally when the user authenticates the card continuously. Affects version :  1.0.0
The 'Delete the Root Certificate' was not displayed when a user with the administrator level accessed the menu on the device where the certificate was stored. Affects version :  1.0.0
When initializing the master device with the 'Without Network' option, the RS-485 communication key was initialized and the slave device was disconnected. Affects version :  1.0.0

Build No. 1.1.2_211220
New Features and Improvements
Improved QR/Barcode reading performance.
Improved the speed at which the device recognizes objects.
Supports LCDs from multiple manufactures.
Bug Fixes
The device rebooted abnormally when a user scanned a card on the device with several cards overlapped in a wallet or the like. Affects version :  1.0.0
When setting the elevator to the scheduled unlock zone and using the 'Started by User Authentication' option, the floor is activated normally when a user belonging to the access group authenticates, but the 'Floor released' logs are output. Affects version :  1.0.0
Improved to check for the duplication of cards registered with users when transmitting user data from the server to devices. Affects version :  1.0.0
The master device reboots if re-searching the slave device while RS-485 communication is operating normally. Affects version :  1.0.0
String resources were not updated when upgrading firmware. Affects version :  1.0.0
PIN authentication did not work properly when using Device Hashkey Management. Affects version :  1.0.0
When loading the logs for the user who entered the admin menu using the SDK, the user ID was not displayed. Affects version :  1.0.0
The device failed to recognize the iCLASS Seos card suddenly (XS2-APB, XS2-QAPB, XS2-OAPB). Affects version :  1.0.0
When authenticating on a device that has dual authentication set up, the authentication success sound is not output for the dual authentication result, and the home screen is maintained. Affects version :  1.0.0
Slave devices are disconnected when the master device is rebooted. Affects version :  1.0.0
Even though the device's language was set to Korean, some phrases were displayed on the screen in English. Affects version :  1.0.0
The device reboots abnormally when the user authenticates the card continuously. Affects version :  1.0.0
The 'Delete the Root Certificate' was not displayed when a user with the administrator level accessed the menu on the device where the certificate was stored. Affects version :  1.0.0
When initializing the master device with the 'Without Network' option, the RS-485 communication key was initialized and the slave device was disconnected. Affects version :  1.0.0

Build No. 1.1.1_211123
New Features and Improvements
Firmware updates used in production (not applicable to upgrade firmware used by customers).
- Updated Boot binary to be compatible with the changed CPU.

Build No. 1.1.1_211123
New Features and Improvements
Firmware updates used in production (not applicable to upgrade firmware used by customers).
- Updated Boot binary to be compatible with the changed CPU.

Build No. 1.1.0_210813
New Features and Improvements
Added devices that support fingerprint
- X-Station 2 Finger (XS2-ODPB, XS2-OAPB)
Intelligent Slave Support
- Intelligent Slave: A function that enables 1:1 or 1 :N matching directly from the Suprema device and transmits the authentication result as OSDP card data to the third-party controller.
Improved manually turning the secure tamper on or off even when the hash key is set.
Bug Fixes
When setting an elevator as a schedule unlock zone, related logs were not displayed properly. Affects version :  1.0.0
The device was rebooted abnormally when selecting all data, exporting them via a USB flash drive, and then importing user data on the device storing maximum user and text log data (500,000 users, 5,000,000 text logs). Affects version :  1.0.0
When scanning a card with XPass D2 (XPD2-GDB, XPD2-MDB) connected as a slave, it did not fail immediately and waited for input after setting the Private Mode to Card + PIN. Affects version :  1.0.0
The firmware upgrade failed in the device connected as a slave. Affects version :  1.0.0
It was not able to enroll fingerprint in some devices that were connected as a slave. Affects version :  1.0.0
When the authentication mode was set to Card + Fingerprint in the slave device, the authentication failed. Affects version :  1.0.0
The RS-485 communication did not work properly when connecting the device to a third-party controller after activating the Secure Communication mode. Affects version :  1.0.0
The firmware upgrade from v1.0.3 or earlier to v1.1.0 failed. Affects version :  1.0.0
- When upgrading the firmware from 1.0.3 or earlier to 1.1.0 or later, upgrade to 1.1.0 firmware first, and then upgrade to the later version firmware again.
The connection to the server was lost when accessing the Ethernet menu on the device. Affects version :  1.0.0
When accessing the menu through ID authentication on a device with T&A mode set and moving back to the home screen, the T&A caption was not displayed. Affects version :  1.0.0
If some ports of the OM-120 connected as a slave are set as a door relay and the device is rebooted, the relay was operated abnormally. Affects version :  1.0.0
An abnormal IP address was set when using DHCP. Affects version :  1.0.0
When the connection to BioStar 2 was lost, an 'Upgrade Failed' message was displayed regardless of the situation. Affects version :  1.0.0
When searching event logs on the device, the date selection popup screen was still displayed after the Menu Timeout. Affects version :  1.0.0

Build No. 1.1.0_210813
New Features and Improvements
Added devices that support fingerprint
- X-Station 2 Finger (XS2-ODPB, XS2-OAPB)
Intelligent Slave Support
- Intelligent Slave: A function that enables 1:1 or 1 :N matching directly from the Suprema device and transmits the authentication result as OSDP card data to the third-party controller.
Improved manually turning the secure tamper on or off even when the hash key is set.
Bug Fixes
When setting an elevator as a schedule unlock zone, related logs were not displayed properly. Affects version :  1.0.0
The device was rebooted abnormally when selecting all data, exporting them via a USB flash drive, and then importing user data on the device storing maximum user and text log data (500,000 users, 5,000,000 text logs). Affects version :  1.0.0
When scanning a card with XPass D2 (XPD2-GDB, XPD2-MDB) connected as a slave, it did not fail immediately and waited for input after setting the Private Mode to Card + PIN. Affects version :  1.0.0
The firmware upgrade failed in the device connected as a slave. Affects version :  1.0.0
It was not able to enroll fingerprint in some devices that were connected as a slave. Affects version :  1.0.0
When the authentication mode was set to Card + Fingerprint in the slave device, the authentication failed. Affects version :  1.0.0
The RS-485 communication did not work properly when connecting the device to a third-party controller after activating the Secure Communication mode. Affects version :  1.0.0
The firmware upgrade from v1.0.3 or earlier to v1.1.0 failed. Affects version :  1.0.0
- When upgrading the firmware from 1.0.3 or earlier to 1.1.0 or later, upgrade to 1.1.0 firmware first, and then upgrade to the later version firmware again.
The connection to the server was lost when accessing the Ethernet menu on the device. Affects version :  1.0.0
When accessing the menu through ID authentication on a device with T&A mode set and moving back to the home screen, the T&A caption was not displayed. Affects version :  1.0.0
If some ports of the OM-120 connected as a slave are set as a door relay and the device is rebooted, the relay was operated abnormally. Affects version :  1.0.0
An abnormal IP address was set when using DHCP. Affects version :  1.0.0
When the connection to BioStar 2 was lost, an 'Upgrade Failed' message was displayed regardless of the situation. Affects version :  1.0.0
When searching event logs on the device, the date selection popup screen was still displayed after the Menu Timeout. Affects version :  1.0.0

Build No. 1.0.3_210705
Bug Fixes
It was able to configure the HID Prox card settings for devices (XS2-QDPB, XS2-DPB) that do not support the HID Prox card from the server. Affects version :  1.0.0
The QR/Barcode sensor did not work properly. Affects version :  1.0.2
The user ID was output differently from the registered user ID when authenticating a QR/Barcode set as a blacklist. Affects version :  1.0.2
The existing QR/Barcode authentication option settings were not maintained after restarting the device. Affects version :  1.0.2

Build No. 1.0.3_210705
Bug Fixes
It was able to configure the HID Prox card settings for devices (XS2-QDPB, XS2-DPB) that do not support the HID Prox card from the server. Affects version :  1.0.0
The QR/Barcode sensor did not work properly. Affects version :  1.0.2
The user ID was output differently from the registered user ID when authenticating a QR/Barcode set as a blacklist. Affects version :  1.0.2
The existing QR/Barcode authentication option settings were not maintained after restarting the device. Affects version :  1.0.2

Build No. 1.0.2_210614
Bug Fixes
- Micom firmware upgrade failed intermittently. Affects version :  1.0.1

Build No. 1.0.2_210614
Bug Fixes
- Micom firmware upgrade failed intermittently. Affects version :  1.0.1

Build No. 1.0.1_210329
Bug Fix

Build No. 1.0.1_210329
Bug Fix

Build No. 1.0.0_210311
Initial Firmware Developed.

Build No. 1.0.0_210311
Initial Firmware Developed.