Firmware Superior Hub Hybrid (4G) (without casing)

All Ajax hubs (except Hub (2G) Jeweller, Hub BP Jeweller, and Hub BP Jeweller (without casing)):
◇ This OS Malevich version includes fixes and improvements that enhance system stability.

All Ajax hubs (except Hub (2G) Jeweller, Hub BP Jeweller, and Hub BP Jeweller (without casing)):
◇ This OS Malevich version includes fixes and improvements that enhance system stability.

All Ajax hubs (except Hub (2G) Jeweller and EN54 Fire Hub Jeweller):
◇ Added the Repeat entry delay setting, which restarts the delay with each new alarm until the system is disarmed. To configure, select the hub: Settings → Services → Arming/disarming process.
◇ Minor fixes improving system performance.

All Ajax hubs (except Hub (2G) Jeweller):
◇ This OS Malevich version provides system stability and support for all security system features.

All Ajax hubs (except Hub (2G) Jeweller, Hub (4G) Jeweller, and Hub BP Jeweller):
◇ Added the Send alarm when connected device goes offline setting, which allows you to configure whether the system treats a device connection loss as a malfunction or an alarm. The setting is available in the hub Jeweller or Jeweller/Fibra settings in the Ajax PRO apps of the following versions:
- Ajax PRO: Tool for Engineer v2.42 and later;
- Ajax PRO Desktop v5.42 and later.

All Ajax hubs (except Hub (2G) Jeweller and EN54 Fire Hub Jeweller):
◇ This OS Malevich version provides system stability and support for all security system features.

All Ajax hubs (except Hub (2G) Jeweller, Hub BP Jeweller, and EN54 Fire Hub Jeweller):
◇ Added the Day alarm mode that allows monitoring certain areas of the facility and controlling access to them when the system is disarmed. To configure day alarm zones, select the hub: Settings → Service → Day alarm. The feature is available in the following Ajax PRO apps versions:
- Ajax PRO: Tool for Engineers v2.34 and later;
- Ajax PRO Desktop v5.34 and later.
◇ Added the Walk test feature to verify system performance. You can run this test from the hub settings to ensure security and fire devices are functioning correctly. The feature is available in the following Ajax apps versions:
- Ajax Security System v3.34 and later;
- Ajax Desktop v5.34 and later;
- Ajax PRO: Tool for Engineers v2.34 and later;
- Ajax PRO Desktop v5.34 and later.
◇ Minor fixes improving system performance.

Hub 2 (4G) Jeweller, Hub 2 Plus Jeweller, Superior Hub Hybrid (4G), Superior Hub Hybrid (4G) (without casing):
◇ Added the ability for voice modules to set up an on-site situation audio recording upon alarm, which is sent to the monitoring station and to Ajax apps. The feature is available for SpeakerPhone Jeweller with firmware version 6.60.5.8 or later.
◇ DoorBell is added to the list of devices that activate the siren sound when their lid is opened. To configure, select the hub: Settings → Service → Sounds and alerts, and enable the If lid of hub or any detector is open option.
◇ Minor fixes improving system performance.

Superior Hub Hybrid (2G), Superior Hub Hybrid (4G), Superior Hub Hybrid (4G) (without casing):
◇ A new scenario type, Scheduled access, was added, which allows granting access to the guests’ Pass and Tag devices or access codes to control the system security state during a specified time and day. The feature is available in the hub settings in the following Ajax PRO apps versions:
- Ajax Security System v3.28 and later;
- Ajax Desktop v5.28 and later;
- Ajax PRO: Tool for Engineers v2.28 and later;
- Ajax PRO Desktop v5.28 and later.
◇ Added the ability to deactivate reporting to monitoring software for specific devices. The feature can be configured in the Monitoring section in the device settings. The feature is available in the following Ajax apps versions:
- Ajax PRO: Tool for Engineers v2.28 and later;
- Ajax PRO Desktop v5.28 and later.

All Ajax hubs (except Hub (2G) Jeweller):
◇ This OS Malevich version provides system stability and support for all security system features.

Hub Plus Jeweller, Hub 2 (2G) Jeweller, Hub 2 (4G) Jeweller, Hub 2 Plus Jeweller, Superior Hub Hybrid (2G), Superior Hub Hybrid (4G):
◇ A new setting for keypads was added to protect against accidental pressing of the panic button. The feature is available in the following Ajax apps versions:
- Ajax Security System v3.25 and later;
- Ajax Desktop v5.25 and later;
- Ajax PRO: Tool for Engineers v2.25 and later;
- Ajax PRO Desktop v5.25 and later.
◇ Added the ability to activate sirens installed on-site upon object or motion detected by video surveillance cameras. The feature can be enabled in the Notifications from camera detectors menu in the camera settings. The feature is available in the following Ajax apps versions:
- Ajax Security System v3.25 and later;
- Ajax Desktop v5.25 and later;
- Ajax PRO: Tool for Engineers v2.25 and later;
- Ajax PRO Desktop v5.25 and later.
◇ Added the ability to set a scheduled hub wake-up from the battery power saving mode. The feature can be set up in the Ajax PRO apps.

Hub Hybrid (2G), Hub Hybrid (4G), Hub Hybrid (4G) (without casing):
◇ This OS Malevich version allows adding up to 50 Ajax wired keypads with a built-in buzzer to the system.
◇ Photo delivery time from MotionCam detectors has decreased. The delivery time depends on the hub’s active communication channel (Ethernet, Wi-Fi, or cellular data).
◇ This OS Malevich version provides system stability and support for all security system features.

Hub 2 (2G) Jeweller, Hub 2 (4G) Jeweller, Hub 2 Plus Jeweller, Hub BP Jeweller, Superior Hub Hybrid (2G), Superior Hub Hybrid (4G), Superior Hub Hybrid (4G) (without casing):
◇ For motion detectors with Photo on demand feature support added the Photo by arming/disarming feature. This feature will be available to users after Ajax apps update:
- Ajax Security System v3.20 and later.
- Ajax PRO: Tool for Engineers v2.20 and later.
- PRO Desktop v4.20 and later.
◇ This OS Malevich version provides system stability and support for all security system features.

All Ajax hubs (except Hub (2G) Jeweller):
◇ In the Group mode added the ability to set followed groups, which helps some groups automatically follow the security state of other groups.
◇ For Superior MultiTransmitter Fibra (without casing), added the Check device lid state when arming setting. When the option is disabled, the system disregards the device lid state for a system integrity check.
◇ Support for new devices and features that will become available in upcoming apps release.

All Ajax hubs (except Hub (2G) Jeweller):
◇ Support adding up to 10 SpeakerPhone Jeweller devices to the system and assigning each to the group. Added more abilities for CMS operators: select and connect to the specific voice module, adjust the volume, and broadcast to all devices.
◇ Added a feature for Curtain Outdoor Jeweller that notifies users and PRO of incorrect device installation, which can lead to fast battery discharge.
◇ Added an ability to set a bistable or pulse operating mode for vhfBridge Jeweller outputs.
◇ Support for new devices and features that will become available in upcoming apps release.

All Ajax hubs (except Hub (2G) Jeweller):
◇ Notification of device triggering during the detection zone test. The app informs the engineer when a device is triggered, which is useful when the LED indication is not visible.
◇ Support for new devices and features that will become available in upcoming apps release.

Hub 2 (4G) Jeweller, Hub 2 Plus Jeweller, Superior Hub Hybrid (4G):
◇ Support for telephony settings. Available in Ajax PRO apps if at least one SpeakerPhone Jeweller is added to the system (Hub → Settings → Telephony settings).
◇ Support for new devices and features that will become available in upcoming apps release.

All Ajax hubs (except Hub (2G) Jeweller):
◇ Support for new devices and features that will become available in upcoming apps release.

All Ajax hubs (except Hub (2G) Jeweller):
◇ Support for new devices and features that will become available in upcoming apps releases.

All Ajax hubs (except the Hub model):
◇ Support for new devices and features that will become available in upcoming apps release.

All Ajax hubs (except the Hub model):
◇ Feature for delaying notifications of external power loss (Hub → Settings → Service).
◇ Support for new features and devices, that will become available with upcoming apps release.

All Ajax hubs (except the Hub model):
◇ Extended Alarm confirmation setting for hubs via the alarm confirmation zone (cross zone).
Available only in PRO apps: Hub → Settings → Service → Alarm confirmation.
What is alarm confirmation feature, and how to configure it
◇ Support for the new system devices.

All Ajax hubs:
◇ Support for new features and devices, that will become available with upcoming apps release.

Hub 2, Hub Plus, Hub 2 Plus, Superior Hub Hybrid:
◇ Battery saving mode* for hubs that are temporarily not connected to an external power supply (Hub → Settings → Service → Battery Power Saver).
◇ For fire detectors from AC line, added the fallback channel for interconnected fire alarm, which allows the alarm to be propagated even if devices lost connection with a hub. You can set the option in hub settings:
Hub → Settings → Service → Fire detectors settings.
◇ For motion detectors with Photo on Demand feature support added the Photo by schedule.
◇ For wired devices connected to integration modules, added new types of alarms and notifications: glass break, high and low temperatures, vibration, masking, duress code (opening).
◇ Support for new features and devices, that will become available with upcoming apps release.
* Feature is not available for Hub 2 Plus Jeweller. It will be delivered in future firmware updates.

Hub 2, Hub Plus, Hub 2 Plus, Superior Hub Hybrid:
◇ Support the new system devices and minimal updates for better performance.

Hub 2, Hub Plus, Hub 2 Plus, Superior Hub Hybrid:
◇ For keypad access codes, added response unit codes, that activates only after alarm for pre-set time. Available in PRO apps.
◇ Added KeyArm Zone that allows switching system arming modes with a third-party device connected to Transmitter or MultiTransmitter.
◇ In hub settings, Jeweller/Fibra menu, added an option that enables notifying of radio jamming with alarm.
◇ The test results after self-test of fire detectors will now be transmitted to CMS via Contact ID and SIA protocols.
◇ Possibility not to send alarm to CMS if the system was disarmed during the alarm transmission delay (PRO apps → Hub → Settings → Service → Arming/Disarming Settings).
◇ Support for the new system devices.

Hub 2, Hub Plus, Hub 2 Plus, Superior Hub Hybrid:
◇ Support for the new system devices, including Ajax Superior product line.
◇ Updated settings for delays when entering/leaving. Now in each security device settings, it is possible to set the operating mode of the device in case of an alarm: instant alarm, alarm after a delay when entering/leaving ends, following the delays of other detectors.
◇ For Superior Hub Hybrid, the support or connecting lines via Ring topology has been added. The ring connection occupies two line outputs of the hub and physically protects the Fibra line. In case of a ring break, not a single device will be disabled: the connection will form two separate lines that will continue operating as usual and transmit events from connected devices to the hub. At the same time, a security company and users will receive a notification about the line break.
◇ In Monitoring Station settings of hubs using SIA direct connection, the ability to set a unique IP address for each alarm channel has been added. To configure the hub settings, in the Ajax apps: Hub → Settings → Monitoring Station → One IP address for all alarm channels. When the option is disabled, the user can specify the primary and secondary IP addresses for the alarm channels.
◇ Supervising feature for Button Jeweller, Superior Button Jeweller. The system performs a daily check of the button’s battery state.
◇ Other minor fixes and improvements.

Hub 2, Hub Plus, Hub 2 Plus, Superior Hub Hybrid:
◇ For all system users, added the ability to run Detection Zone Test from hub settings.
◇ The ability to deactivate devices for one time until the system is disarmed.
◇ Support for the new security system devices.

Hub 2, Hub Plus, Hub 2 Plus, Superior Hub Hybrid:
◇ Support for the new security system devices.
◇ For LifeQuality added the support of charts, showing the fluctuation of air quality values. Please note that only measurements recorded after hub updates to version 2.15 will be shown in charts.
◇ Sound indication for keypads according to UL certification requirements. With the appropriate settings, the keypads beep to notify users about a low battery of any device in the system or the currently offline devices.
Enable the feature in hub settings in a PRO app: Hub → Settings → Service → Sounds and Alerts.
Please note that the feature will only be available for the keypads’ latest firmware versions.
◇ The new type of push notifications in User settings (Hub → Settings → Users → User name → Notification settings). Now it is possible to determine if the user will receive the push notifications about automation devices triggering and notifications of air quality values fluctuation.
◇ In notifications from automation devices, added the information of the triggering reason. The device is switched on/off:
- by the user in the app;
- by scenario;
- by the user pushing the device button.
New notifications are currently not supported in the PRO Desktop app.
◇ Other minor fixes and improvements.

Hub 2, Hub Plus, Hub 2 Plus, Superior Hub Hybrid:
◇ Scenario by temperature change. Now in automation devices settings, you can set the reaction of the device (switch on, switch off, switch the state) to the change of temperature measured by other system detectors.
◇ New security system devices support.
◇ Bug fixes in operation of Keypad Access Codes feature with Group mode enabled.