Hikvision DS-3T1506HP-EI-UPS este un echipament de rețea, listat de producător la „Transmission / Network Switches”.

Câteva date tehnice importante: alimentare PoE (802.3af), consum maxim de 120 W și funcționare între −40 și +75 °C. Aparatul cântărește 700 g și are dimensiunile 158.00 mm × 44.00 mm × 130.00 mm (6.22'' × 1.73'' × 5.12'').

Hikvision oferă pentru DS-3T1506HP-EI-UPS firmware-ul V3.3.3 build 260707, lansat la 07.07.2026. Fișierul se descarcă direct de pe serverele Hikvision; IPCCTV nu găzduiește firmware.

Firmware-ul se încarcă din interfața web a aparatului (meniul de întreținere / upgrade), din SADP sau iVMS-4200 ori, la înregistratoare, de pe un stick USB din meniul local.

Tabelul de specificații de mai jos conține toate datele tehnice publicate de producător, traduse în română.

Firmware actual

Versiune

Data

Regiune

Descărcare și note

V3.3.3 build 260707Firmware_V3.3.3_260707

07.07.2026

Global, Europa

Descarcă de la Hikvision

Versiuni anterioare

Hikvision publică doar versiunea actuală pentru acest model. Când apare o versiune nouă, o păstrăm pe cea veche aici.

Specificații DS-3T1506HP-EI-UPS

Greutate netă

0.7 kg (1.54 lb)

Greutate brută

1.16 kg (2.56 lb)

Dimensiuni (L × Î × A)

158.00 mm × 44.00 mm × 130.00 mm (6.22'' × 1.73'' × 5.12'')

Temperatură de funcționare

-40 °C – 75 °C (-40 °F – 167 °F)

Temperatură de depozitare

-40 °C – 85 °C (-40 °F – 185 °F)

Umiditate de funcționare

5% – 95% (no condensation)

Umiditate relativă

5% – 95% (no condensation)

Alimentare

12V DC, 10A or 24V DC, 5A; 54V 2.22A

Mod de montaj

Desk-Mounted,Rail,Wall-Mounted

Consum maxim

120 W

Consum în repaus

2 W

Protecție la supratensiune

6 kV

Carcasă

Metal material, IP30

Porturi

4 × Gigabit PoE port,2 × Gigabit fiber optical port,1 x RS485 port

Tabelă de adrese MAC

2 K

Capacitate de comutare

Whole-Device Performance: 14 Gbps
Port Performance: 12 Gbps

Rată de redirecționare pachete

Whole-Device Performance: 10.42 Mpps
Port Performance: 8.93 Mpps

Memorie cache internă

1 Mbits

Rază lungă

Ports 1 – 4: up to 300 m.
Long range performance may vary depend on camera model or cable condition.

Izolare porturi

Ports 1 – 6: port isolation mode to improve network security
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 – 4: auto detect and restart the cameras that do not respond.

Agregare legături

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 2 aggregation group(s).

Prevenire bucle

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Support 802.1w RSTP.
Support G.8032 ERPS.

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.
Support port-based priority configuration.
Support SP, WRR priority schedule mode.

VLAN

VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.

Întreținere sistem

Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Support 802.1ab LLDP for peer device discovery.
Support port mirroring for fault locating.

DHCP Snooping

DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.

DDM (Digital Diagnostic Monitoring)

Support real-time monitoring of key parameters in optical modules, such as operating temperature, operating voltage, operating current, and Rx and Tx optical power.

Standard PoE

Port 1: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
Ports 2 – 4: IEEE 802.3af, IEEE 802.3at
Ports 3 – 4: support passive PoE, 24 V or 54 V output depending on DIP switch settings

Pini alimentare PoE

Port 1: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
Port 2: End-span: 1/2(-), 3/6(+)
Ports 3 – 4: 8-pin power: 1/2(-), 3/6(+), 54 V output ; 4/5(+), 7/8(-), 24 V output

Port PoE

Hi-PoE: Port 1
PoE: Ports 2 – 4

Putere maximă pe port

Port 1: 90 W
Ports 2 – 4: 30 W

Buget de putere PoE

DC 54 V input: 110 W
DC 12 V~24 V input: 60 W

Compatibilitate electromagnetică (EMC)

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)

Siguranță

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)

Chimie baterie

CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Specificațiile sunt cele publicate de Hikvision, cu etichetele traduse în română (preluate la 04.11.2026). Ce nu am tradus a rămas în engleză.