Modelul DS-3T1306P-SI/HS face parte din gama Hikvision, categoria „Transmission / Network Switches”.

Câteva date tehnice importante: alimentare PoE (802.3af), consum maxim de 65 W și funcționare între −30 și +65 °C. Ca gabarit, cântărește 400 g și are dimensiunile 158.00 mm × 101.20 mm × 31.60 mm (6.20'' × 3.90'' × 1.20'').

Ultima versiune de firmware publicată de Hikvision pentru DS-3T1306P-SI/HS este V3.0.5 build 240704, din 04.07.2024 (regiunea Global). Mai jos găsești link-ul oficial de descărcare, notele de versiune și versiunile anterioare.

Firmware-ul se încarcă din interfața web a aparatului (meniul de întreținere / upgrade), din SADP sau iVMS-4200 ori, la înregistratoare, de pe un stick USB din meniul local.

Specificațiile complete, cu etichetele traduse în română, sunt în tabelul de mai jos.

Firmware actual

Versiune

Data

Regiune

Descărcare și note

V3.0.5 build 240704Firmware_V3.0.5_240704

04.07.2024

Global, Europa

Descarcă de la Hikvision

Versiuni anterioare

Hikvision publică doar versiunea actuală pentru acest model. Când apare o versiune nouă, o păstrăm pe cea veche aici.

Specificații DS-3T1306P-SI/HS

Carcasă

Metal material

Greutate netă

0.4 kg (0.8 lb)

Greutate brută

1.0 kg (2.2 lb)

Dimensiuni (L × Î × A)

158.00 mm × 101.20 mm × 31.60 mm (6.20'' × 3.90'' × 1.20'')

Temperatură de funcționare

-30 °C – 65 °C (-22 °F – 149 °F)

Temperatură de depozitare

-40 °C – 85 °C (-40 °F – 185 °F)

Umiditate de funcționare

5% – 95% (no condensation)

Umiditate relativă

5% – 95% (no condensation)

Alimentare

48VDC, 1.36A

Mod de montaj

Desk-Mounted,Rail

Consum maxim

65 W

Consum în repaus

5 W

Protecție la supratensiune

6 kV

Porturi

4 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port

Tabelă de adrese MAC

2 K

Capacitate de comutare

Whole-Device Performance: 14 Gbps
Port Performance: 4.8 Gbps

Rată de redirecționare pachete

Whole-Device Performance: 10.42 Mpps
Port Performance: 3.57 Mpps

Memorie cache internă

1 Mbits

Rază lungă

Ports 1 – 4: up to 300 m.
Long range performance may vary depend on camera model or cable condition.

Izolare porturi

Ports 1 – 4: port isolation mode to improve network security
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 – 4: auto detect and restart the cameras that do not respond.

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.
Support port-based priority configuration.
Support SP, WRR priority schedule mode.

VLAN

VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.

Prevenire bucle

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Support 802.1w RSTP.

Întreținere sistem

Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Support 802.1ab LLDP for peer device discovery.
Support port mirroring for fault locating.

Port Rate-Limiting

Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.

Storm Control

Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.
Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

DHCP Snooping

DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.

ACL

Support ACL definitions based on source/destination MAC address, source/destination IP address, IP protocol type.
Support ACL application on ports.
Support IPv4 ACL and MAC ACL configurations.
Support inbound ACLs.

Standard PoE

IEEE 802.3af,IEEE 802.3at

Pini alimentare PoE

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

Port PoE

PoE: Ports 1 – 4

Putere maximă pe port

30 W

Buget de putere PoE

60 W

Compatibilitate electromagnetică (EMC)

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)