Firmware FLEXIDOME IP 3000i IR

New Features:
N/A

Changes:
• Fixed an issue on the MIC Fusion 9000i Spotter variant where pan/tilt speeds were incorrectly limited due to zoom module settings being loaded based on the device variant ID rather than the actual zoom module installed.
• Fixed several issues in the recording engine related to retention time handling, recording mode fallback, and DST timezone offset block separation.
• Fixed an issue where progressive image darkening could occur due to incorrect iris configuration, particularly in low light conditions and depending on other environmental factors.
• Improved text layout for unsupported Hebrew characters, which are now displayed as spaces instead of rectangles for a cleaner presentation.
• Fixed an issue on the MIC Fusion 9000i where ONVIF zoom and PTZ commands for the thermal and optical blocks could not be fully separated, causing inconsistent pan/tilt behavior when the two sensors were at different zoom levels.

SHA256: 66989C278DC7281A770E77A605FF988EF59AB3102E1E6D27C38E7AE11B46B9F9

New Features:
• Extended LLDP Support: LLDP capabilities have been expanded to include additional TLVs for enhanced network integration, monitoring, and management. By default, cameras now support: TLV 4 (Port Description), TLV 5 (System Name), TLV 6 (System Description), TLV 7 (System Capabilities), and TLV 8 (Management Address), allowing network administrators to collect more detailed device information for improved automation, diagnostics, and security policy enforcement.

Changes:
• Fixed an issue affecting ONVIF Replay functionality, primarily impacting non-edge replay and replay performed via third-party software, where some packets could be lost when replay was triggered via ONVIF, occasionally causing artifacts in parts of the timeline. System robustness has been improved to reduce the likelihood of this occurring, enhancing reliability for integrations using ONVIF Replay.
• Improved the ONVIF search session handling to provide faster responses during forensic searches in third-party VMS platforms that support ONVIF.
• ONVIF GetVideoEncoderConfigurationOptions now returns all available stream resolutions of 1st Stream in a single response.
• Cameras now handle mismatches between configured EAP type and RADIUS requests more robustly. If the RADIUS server requests a different EAP type than the camera is configured for, the camera replies with a NAK indicating its preferred EAP method (EAP-MD5 or EAP- TLS), allowing the RADIUS server to switch to a compatible method and improving authentication reliability.
• ONVIF PanTilt streaming values now match GetStatus output and comply with the -1 to 1 specification.
• Fixed an issue where software sealing could be broken after a reboot, reducing the occurrence of false alarms and improving system reliability.
• Fixed an issue where uploading a certificate in the wrong format failed silently. A Web UI notification is now displayed to inform the user of the error.

SHA256: E8BA514BFF4C25F6D556C41D59A2EFF62A13B72892B9A83DEA6591B3C162075B

New Features:
• Support of new FLEXIDOME IP 3000i IR cameras added.
• A banner has been introduced which allows to provide a system use notification to a user before authenticating.
• A switch has been added to directly activate or deactivate VCA without requiring the configuration plug-in.

Changes:
• Applicable for: AUTODOME IP starlight 7000i and MIC IP fusion 9000i
• Improved Focus algorithm when moving to prepositions. This is most applicable to difficult scenes, such as low light/low contrast conditions.
• The default AE response speed was changed from Medium to Fast. This improves the AE and focus response time when moving from dark to light and light to dark prepositions at night. This is most applicable when the camera is forced to remain in Color in low-light conditions.
• A new camera block FW is integrated into the System Controller. This FW provides improvements in the image performance and focus reliability and response time.
• Added the capability to set the Near Limit to "infinity". When the Near Limit slider is set exactly to the maximum of 20m, then the Near Limit is now saved as infinity.
• Applicable for: AUTODOME IP starlight 7000i, MIC IP starlight 7000i, MIC IP ultra 7100i, and MIC IP fusion 9000i
• A 5 second delay is automatically added at the end of the playback guard tour after the tour recording is stopped. This improved the focus response time when moving conditions.
• An issue is fixed where the record/playback guard tour did not always stop at the correct position at the end of the tour. This occurred most often with Tour B.
• An issue is fixed with Intelligent Tracking, where the camera could randomly fail to stop moving after a target is lost.
• Added support for BiCom Object 0x11.0 Operation (0x86)/MoveContVarFinSpeed. This is beneficial for 3rd party system integration.
• An issue is fixed where CONF_ALARM_OVERVIEW did not return proper state flags for VCA external simple states.
• The default day/night near focus limit was changed to 3m for the outdoor models. This improves the focus response time during, slow manual movements, Auto-Pan 360, and Auto- Pan between limits.
• An issue is fixed where the iris default values were not correctly recovered when switching
• An issue is fixed for AUTODOME IP starlight 5000i where home position coordinates were not stored correctly.
• An issue is fixed where the audio recording format was disabled and could not be changed after recording was stopped.
• An issue is fixed where the web interface was lacking responsiveness when HTTP was deactivated.
• An issue, apparent in FW 7.81 and higher, is fixed where video via RTSP over TCP sporadically appears black after recovering from a network interruption.
• An issue is fixed where a camera could be driven into constant overload due

SHA256: B4EC6B8CFD2D234F3ECBD6D3B0F7D6ED7A8C91AF2E8DE55544241E6EF7B09BEA