Suceava — livrare în toată România Zilnic 08:00–17:00 Locație 0751 478 912
AUTODOME IP 4000i – Cameră IP
Bosch · Cameră IP · Cameras and Encoders

Firmware AUTODOME IP 4000i

Ultima versiune: V7.94.0012
  • 5,3–64 mm
  • PoE
  • IP65

Fișa pe scurt

Obiectiv
5,3–64 mmvarifocal · unghi orizontal 4,9°
Stocare locală
până la 2 TBcard microSD
Compresie
MJPEG
Alimentare
PoE / 24 V ACPoE 802.3at · max. 12 W
Protecție
IP65 · IK10praf și apă, impact
Dimensiuni
170.2 mm × 162.4 mm1,88 kg

Prezentare

Bosch AUTODOME IP 4000i este o cameră IP și obiectiv varifocal de 5,3–64 mm.

Ca gabarit, cântărește 1,88 kg și are dimensiunile 170,2 mm × 162,4 mm. Toate datele tehnice publicate de Bosch sunt în tabelul de specificații de mai jos, traduse în română.

Puncte forte

  • Obiectiv varifocal de 5,3–64 mm, unghi orizontal de până la 4,9°
  • Slot microSD de până la 2 TB
  • Alimentare PoE (802.3at) sau 24 V AC
  • Protecție IP65 și rezistență la impact IK10
  • Compresie MJPEG

Firmware actual

Înainte de actualizare: verifică pe eticheta aparatului modelul exact și versiunea hardware și folosește firmware-ul din regiunea aparatului (de exemplu Global sau Europa). Un firmware greșit poate bloca aparatul. Nu întrerupe alimentarea în timpul actualizării.
VersiuneDataRegiuneDescărcare și note
V7.94.0012CPP7.3_FW_7.94.0012 (2).fw · același fișier pentru 51 de modele—Global
Ce e nou în această versiune (textul producătorului)
New Features:
N/A

Changes:
• Fixed several issues in the recording engine related to retention time handling, recording mode fallback, and DST timezone offset block separation.
• When the password unlock tool is used successfully after a user has forgotten the password, the camera now prompts the user to create a new password immediately after the password challenge is entered, instead of resetting the password to the default value.
• After switching the IP stack from IPv4 or IPv4/IPv6 mode to IPv6 mode, the device now reboots to ensure a reliable mode transition and prevent misconfiguration.

SHA256: D849E8DA78201133632A712561FDF9C2D1AB4F6595266C22BE2A3C9DD2E0A3AF

Versiuni anterioare

VersiuneDataRegiuneDescărcare și note
V7.94.0012CPP7.3_FW_7.94.0012.fw · același fișier pentru 51 de modele—
retras din lista Bosch după 06.11.2026
Global
Ce e nou în această versiune (textul producătorului)
New Features:
N/A

Changes:
• Fixed several issues in the recording engine related to retention time handling, recording mode fallback, and DST timezone offset block separation.
• When the password unlock tool is used successfully after a user has forgotten the password, the camera now prompts the user to create a new password immediately after the password challenge is entered, instead of resetting the password to the default value.
• After switching the IP stack from IPv4 or IPv4/IPv6 mode to IPv6 mode, the device now reboots to ensure a reliable mode transition and prevent misconfiguration.

SHA256: 23B93631309D5515313E2A33E5A311A9EB4D02FC177C62514F1316F1A2C62023
V7.93.0024CPP7.3_FW_7.93.0024.fw · același fișier pentru 51 de modele18.02.2025Global
Ce e nou în această versiune (textul producătorului)
New Features:
N/A

Changes:
• Fixed an issue on the MIC Fusion 9000i Spotter variant where pan/tilt speeds were incorrectly limited due to zoom module settings being loaded based on the device variant ID rather than the actual zoom module installed.
• Fixed several issues in the recording engine related to retention time handling, recording mode fallback, and DST timezone offset block separation.
• Fixed an issue where progressive image darkening could occur due to incorrect iris configuration, particularly in low light conditions and depending on other environmental factors.
• Improved text layout for unsupported Hebrew characters, which are now displayed as spaces instead of rectangles for a cleaner presentation.
• Fixed an issue on the MIC Fusion 9000i where ONVIF zoom and PTZ commands for the thermal and optical blocks could not be fully separated, causing inconsistent pan/tilt behavior when the two sensors were at different zoom levels.

SHA256: 66989C278DC7281A770E77A605FF988EF59AB3102E1E6D27C38E7AE11B46B9F9
V7.92.0029CPP7.3_FW_7.92.0029.fw · același fișier pentru 51 de modele18.02.2025Global
Ce e nou în această versiune (textul producătorului)
New Features:
• Extended LLDP Support: LLDP capabilities have been expanded to include additional TLVs for enhanced network integration, monitoring, and management. By default, cameras now support: TLV 4 (Port Description), TLV 5 (System Name), TLV 6 (System Description), TLV 7 (System Capabilities), and TLV 8 (Management Address), allowing network administrators to collect more detailed device information for improved automation, diagnostics, and security policy enforcement.

Changes:
• Fixed an issue affecting ONVIF Replay functionality, primarily impacting non-edge replay and replay performed via third-party software, where some packets could be lost when replay was triggered via ONVIF, occasionally causing artifacts in parts of the timeline. System robustness has been improved to reduce the likelihood of this occurring, enhancing reliability for integrations using ONVIF Replay.
• Improved the ONVIF search session handling to provide faster responses during forensic searches in third-party VMS platforms that support ONVIF.
• ONVIF GetVideoEncoderConfigurationOptions now returns all available stream resolutions of 1st Stream in a single response.
• Cameras now handle mismatches between configured EAP type and RADIUS requests more robustly. If the RADIUS server requests a different EAP type than the camera is configured for, the camera replies with a NAK indicating its preferred EAP method (EAP-MD5 or EAP- TLS), allowing the RADIUS server to switch to a compatible method and improving authentication reliability.
• ONVIF PanTilt streaming values now match GetStatus output and comply with the -1 to 1 specification.
• Fixed an issue where software sealing could be broken after a reboot, reducing the occurrence of false alarms and improving system reliability.
• Fixed an issue where uploading a certificate in the wrong format failed silently. A Web UI notification is now displayed to inform the user of the error.

SHA256: E8BA514BFF4C25F6D556C41D59A2EFF62A13B72892B9A83DEA6591B3C162075B
V7.87.0029CPP7.3_FW_7.87.0029.fw · același fișier pentru 51 de modele07.06.2023Global
Ce e nou în această versiune (textul producătorului)
New Features:
• Support of new FLEXIDOME IP 3000i IR cameras added.
• A banner has been introduced which allows to provide a system use notification to a user before authenticating.
• A switch has been added to directly activate or deactivate VCA without requiring the configuration plug-in.

Changes:
• Applicable for: AUTODOME IP starlight 7000i and MIC IP fusion 9000i
• Improved Focus algorithm when moving to prepositions. This is most applicable to difficult scenes, such as low light/low contrast conditions.
• The default AE response speed was changed from Medium to Fast. This improves the AE and focus response time when moving from dark to light and light to dark prepositions at night. This is most applicable when the camera is forced to remain in Color in low-light conditions.
• A new camera block FW is integrated into the System Controller. This FW provides improvements in the image performance and focus reliability and response time.
• Added the capability to set the Near Limit to "infinity". When the Near Limit slider is set exactly to the maximum of 20m, then the Near Limit is now saved as infinity.
• Applicable for: AUTODOME IP starlight 7000i, MIC IP starlight 7000i, MIC IP ultra 7100i, and MIC IP fusion 9000i
• A 5 second delay is automatically added at the end of the playback guard tour after the tour recording is stopped. This improved the focus response time when moving conditions.
• An issue is fixed where the record/playback guard tour did not always stop at the correct position at the end of the tour. This occurred most often with Tour B.
• An issue is fixed with Intelligent Tracking, where the camera could randomly fail to stop moving after a target is lost.
• Added support for BiCom Object 0x11.0 Operation (0x86)/MoveContVarFinSpeed. This is beneficial for 3rd party system integration.
• An issue is fixed where CONF_ALARM_OVERVIEW did not return proper state flags for VCA external simple states.
• The default day/night near focus limit was changed to 3m for the outdoor models. This improves the focus response time during, slow manual movements, Auto-Pan 360, and Auto- Pan between limits.
• An issue is fixed where the iris default values were not correctly recovered when switching
• An issue is fixed for AUTODOME IP starlight 5000i where home position coordinates were not stored correctly.
• An issue is fixed where the audio recording format was disabled and could not be changed after recording was stopped.
• An issue is fixed where the web interface was lacking responsiveness when HTTP was deactivated.
• An issue, apparent in FW 7.81 and higher, is fixed where video via RTSP over TCP sporadically appears black after recovering from a network interruption.
• An issue is fixed where a camera could be driven into constant overload due

SHA256: B4EC6B8CFD2D234F3ECBD6D3B0F7D6ED7A8C91AF2E8DE55544241E6EF7B09BEA
V7.86.0019CPP7.3_FW_7.86.0019.fw · același fișier pentru 50 de modele03.01.2023Global
Ce e nou în această versiune (textul producătorului)
New Features:
• The video.mp4 URL now accepts parameters to stream using RTSP, and also to access stream 2.
• The RCP command CONF_ALARM_OVERVIEW now includes recording errors and SD card mounting states.

Changes:
• An issue with manual iris or focus control via ONVIF is fixed.
• An issue with certain VCA events erroneously reporting ‘signal loss’ via ONVIF is fixed.
• An issue with reverted iris control on AUTODOME IP starlight 5100i (IR), affecting image quality, is fixed.
• An issue where an AUTODOME IP starlight 5100i (IR) might have stuck in night mode is fixed by changing the underlying behavior of the day-night switch slider:
• Night-to-day switchover positions higher than the default value will have an increasing wait period before switching from night mode back to day mode to prevent too early switching and oscillations.
• Night-to-day switchover positions also require a higher light level to switch than before to prevent too early switching as well.
• An issue with wrong compass direction in inverted mode is fixed.
• An issue with AUTODOME IP starlight 5000i (IR) and AUTODOME IP starlight 5100i (IR), where zoom value via ONVIF Absolute Positioning command was incorrect, is fixed.
• An issue is fixed where after updating an AUTODOME IP starlight 5100i (IR) from firmware 7.60 to 7.85 PTZ was only working after rebooting the camera twice.
• An issue is fixed where the virtual mask configuration on moving cameras was not closed when switching from configuration to live, rendering the virtual masks solid.
• An issue with MIC cameras, using the serial port (under license) with Pelco D protocol, where nothing was responded back to serial port, is fixed.
• An issue, introduced with firmware 7.85, where putting the camera in corridor mode caused continuous reboots, is fixed.
• An issue is fixed where the calibration pane is twisted on a DINION IP 3000i when put in corridor mode, hindering VCA to detect objects.
• Multiple vulnerabilities in 3rd party libraries that were identified during UL 2900-3-2 certification are fixed.
• An issue is fixed where 802.1x authentication failed when EAP-PEAP is requested prior to EAP-TLS.
• An issue is fixed where necessary network settings were set to default on application variant switching, now including hostname and unit name.

SHA256: 79E0EB5B5CC964E3B3E31622D8F1C4DB446EA6DE5A2EF9F3C9022A20F2E2731C
V7.85.0016CPP7.3_FW_7.85.0016.fw · același fișier pentru 50 de modele07.10.2022Global
Ce e nou în această versiune (textul producătorului)
New Features:
• Cipher suites have been extended to provide higher security by adding the following ciphers:
• TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384
• TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256
• TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384
• DNS resolution has been extended to also cover URLs in FTP accounts.
• On cameras with value level 7000 and higher, Camera Trainer is now enabled without requiring a license.

Changes:
• An issue is fixed where the video stream is interrupted when an encoder profile is changed, e. g. due to adaptation for event recording by a DIVAR hybrid or network.
• PTZ latency of AUTODOME IP starlight 5100i and AUTODOME IP starlight 5100i IR has been improved.
• An issue is fixed where the thermal picture settings in a MIC IP fusion 9000i were lost during a reboot.
• An issue is fixed where the encoder streams configuration via ONVIF on FLEXIDOME IP 8000i with sensor resolutions above HD was not possible to utilize independent frame rate configuration when only 1080p resolution was required for stream 1 and stream 2.
• An issue is fixed where a MIC IP starlight 7100i does not move back to the correct Absolute Position when using ONVIF GetStatus and then manually moving away from the position.
• A rounding issue is fixed where a relative move via ONVIF showed different distance travelled for tilting the camera up versus down.
• An issue is fixed by a better description in the web user interface that a certificate signing request requires the country code instead of the country name.
• An issue is fixed in the ONVIF metadata translation where latitude and longitude values were swapped.
• The following issues are fixed for MIC IP 7000i and MIC IP 9000i that occurred after a heartbeat recovery is completed (camera briefly displays status 23):
• The camera ignored the zoom value of the preposition and always returned to a zoom factor of 1X.
• The camera ignored customer setting for night mode and always returned to AUTO.
• If an Inactivity Timer was in use, the selected function did not activate after the time period expired.
• An issue is fixed for all CPP7.3 moving cameras where ‘AUX 50 Off’ did not disable the in- activity timer.

SHA256: 686DB44B708DC52A0BF4F4BC48DA0DFAD9EC15623462183B97B3CF430400C634
V7.84.0023CPP7.3_FW_7.84.0023.fw · același fișier pentru 50 de modele06.05.2022Global
Ce e nou în această versiune (textul producătorului)
New Features:
• Bandwidth throttling has been added to allow the camera being installed on networks with limited throughput capacity. The available bandwidth can be configured as kbps values in the Ethernet section of the Network Access menu. The camera will then limit its data generation on the network to this maximum Ethernet transmission value to avoid bursts in the network traffic. The Ethernet input on the camera is not limited.
• The Network Access menu has been separated for IPv4 and IPv6 addresses. IPv4 and IPv6 can now separately be configured and activated.
• IP filter entries have been extended to allow up to 20 IP addresses or ranges.
• For certificate-based network authentication, and in case of an unsubstantiated time base, the camera may assume its time from the overlapping validity periods in the EAP-TLS certificates, if this feature is enabled via the camera’s settings. With valid certificates, this will allow the camera to connect to the network even in case of an invalid system time due to e. g. a longer power loss.

Changes:
• An issue is fixed where insufficient memory allocation caused sporadic unresponsiveness of a camera’s web user interface.
• An issue is fixed where a wrong color was applied to alarm-triggered bounding boxes when using Camera Trainer.
• An issue is fixed where metadata from optical and thermal sensors were misaligned for video fusion in MIC 9000i.
• An issue is fixed for MIC-7000i & MIC-9000i where a heartbeat recovery occurred when the camera displays status 23. Prior to this FW there could be a random loss of PTZ control after the recovery was completed.

SHA256: 2F2F754CFCA022A4C43F4AB9F95CEFFADB9C8433C3E335D54DECB99735313694

Firmware și actualizări

Ultima versiune de firmware publicată de Bosch pentru AUTODOME IP 4000i este V7.94.0012. Mai jos găsești link-ul oficial de descărcare, notele de versiune și versiunile anterioare.

Aceeași versiune de firmware este publicată pentru 51 modele.

Firmware-ul se încarcă din interfața web a aparatului sau din Bosch Configuration Manager.

Alternative și comparație

Notele compară AUTODOME IP 4000i cu celelalte camere IP cu rotire (PT) din baza noastră (120 de modele notate de la 12 mărci), doar pe baza specificațiilor publicate de producători. Apasă pe o notă ca să vezi datele din care provine.

Nota tehnică—nu se calculează: lipsesc prea multe date din fișă
  • Imaginedate insuficiente

    Criterii declarate: 1/4 · date insuficiente: criteriile declarate acoperă 15% din pondere (minim 50%)

    • Rezoluție: nedeclarat (nu intră în notă)
    • Senzor: nedeclarat (nu intră în notă)
    • Cadre/s la rezoluția maximă: 60 fps → 9,9 (mai bun decât 98% din segment, la egalitate cu 2%)
    • WDR: nedeclarat (nu intră în notă)
  • Noaptedate insuficiente

    Criterii declarate: 0/3 · date insuficiente: criteriile declarate acoperă 0% din pondere (minim 50%)

    • Distanță iluminare: nedeclarat (nu intră în notă)
    • Sensibilitate (iluminare minimă color): nedeclarat (nu intră în notă)
    • Tehnologie de noapte: nedeclarat (nu intră în notă)
  • Funcții inteligente0

    Criterii declarate: 1/1

    • Funcții declarate: niciuna declarată; nedeclarat în fișă (0 puncte): detecție om/vehicul, protecție perimetrală (linie / intruziune), detecție / recunoaștere facială, citire numere auto (LPR), numărare persoane, descurajare activă (lumină / sunet) → 0
  • Construcție și instalare6,5

    Criterii declarate: 2/3

    • Protecție carcasă (IP / IK): IP65, IK10 → 8
    • Temperatură minimă de funcționare: nedeclarat (nu intră în notă)
    • Interfețe: alimentare PoE, card microSD (256 GB+ = punctaj întreg); nedeclarat în fișă (0 puncte): audio (bidirecțional = punctaj întreg), intrări / ieșiri de alarmă → 5

Notele (0–10) sunt calculate automat din fișele tehnice oficiale, față de produsele din aceeași categorie; nu sunt teste de laborator. Un criteriu pe care producătorul nu îl declară apare ca „nedeclarat” și nu intră în notă.

Unde se potrivește

  • Când nu știi exact ce unghi îți trebuie: focala se ajustează la montaj
  • Locuri la îndemâna oamenilor (holuri de bloc, școli, spații publice): carcasa IK10 rezistă la lovituri

Instalare și compatibilitate

Se alimentează prin PoE (802.3at): un singur cablu de rețea aduce date și curent de la un switch PoE sau de la un NVR cu porturi PoE. Varianta cu sursă separată: 24 V AC. Consumul maxim este de 12 W. Între cameră și switch pot fi cel mult 100 m de cablu UTP (Cat5e sau Cat6).

Înregistrează și local, pe card microSD de până la 2 TB, util ca rezervă dacă pică legătura cu înregistratorul.

Specificații AUTODOME IP 4000i

Technical specifications

7 rânduri
Imager1/2.8” progressive scan CMOS
Effective Picture Elements1945 x 1097 (2.13 MP)
Lens Focal Length12x Zoom
5.3 mm – 64 mm (F1.6 to F2.8)
Field of View (FOV)4.9° – 58.5°
FocalizareAutomatic with manual override
DiafragmăAutomat
Zoom digital16x

Video performance - Sensitivity

14 rânduri
Culoare0.05 lx
Mono0.01 lx
High dynamic range94 dB (measured according to IEC 62676 Part 5)
Electronic Shutter Speed (AES)1/30 s – 1/15000 s (12 steps)
Signal-to-noise Ratio (SNR)>55 dB (AGC off)
Reducere zgomotIntelligent Dynamic Noise Reduction
Backlight Compensation (BLC)On/Off, Intelligent Auto Exposure (IAE)
Intelligent DefogAutomatically adjusts parameters for best picture in foggy or misty scenes (Auto/Off)
Balans de albStandard Auto, Sodium Lamp Auto, Basic Auto, Manual, Hold, Dominant Color Auto
Zi/noapteMechanical switchable IR filter (Auto/On/off)
Monochrome
Sector/Titling16 independent sectors with 20 characters per title
Privacy Masks32 individually configurable privacy masks
Privacy Masks patternBlack, White, Gray, Auto (average background color)
Supported LanguagesEnglish, German, Spanish, French, Italian, Dutch, Polish, Portuguese, Russian, Japanese, Chinese (simplified)

Video content analysis

4 rânduri
Analysis typeEssential Video Analytics
ConfigurationsSilent VCA / Profile1 - 16
Alarm rules (combinable)Any object
Object in field
Crossing line
Entering field
Leaving field
Loitering
Following route
Idle object
Removed object
Counter
Occupancy
Crowd detection
Condition change
Similarity search
Tampering
Object filtersDuration

Mecanică

7 rânduri
Pan/Tilt ModesNormal: 0.1°/s - 120°/s Turbo: Pan: 0.1°/s - 160°/s; Tilt: 0.1°/s - 120°/s
Pre-position SpeedPan: 160°/s
Tilt: 120°/s
Unghi pan360° continuous
Tilt Angle-90° – 0° (Auto-flip 180°)
Pre-position Accuracy± 0.1° typ.
Pre-positions256
ToursRecorded tours: two (2), maximum total duration 15 minutes (depending on the amount of commands sent during recording)

Electric

2 rânduri
Input voltage24 VAC and PoE+
Consum24 VAC: 12 W
PoE+: 12 W

Rețea

5 rânduri
Compresie videoH.265
H.264
M-JPEG
StreamingFour (4) streams: Two (2) configurable streams in H.264 or H.265
One (1) I-frames-only stream based on first stream
One (1) M-JPEG Stream
Cadre pe secundă60fps at all resolutions
Rezoluție1080p
720p
D1 4:3 (cropped)
SD (432p, 288p)
IP delay (typical)60 fps: 200 ms

Local Storage

1 rând
Memory card slotSupport a memory card with a maximum of 32 GB (microSDHC) / 2 TB (microSDXC) (user-supplied). (An SD card of Class 6 or higher is recommended for HD recording.)

User Connections

1 rând
AlimentareRJ45 10/100 Base-T PoE+ (IEEE 802.3at, class 4 standard)

Communications / Software Control

1 rând
Serial protocolsBosch OSRD, Pelco P/D, Forward Vision, and Cohu

Environmental (pendant model)

5 rânduri
Ingress Protection Rating/ StandardIP65
IK RatingIK10
Temperatură de funcționare-10 ºC to +55 ºC
(+14 °F – +131 °F)
UmiditatePână la 90% RH, fără condensare
Temperatură de depozitare-40 ºC to +60 ºC
(-40 °F – +140 °F)

Environmental (in-ceiling model)

4 rânduri
Ingress Protection Rating/ StandardIP51
Temperatură de funcționare-10 ºC to +55 ºC
(+14 °F – +131 °F)
UmiditatePână la 90% RH, fără condensare
Temperatură de depozitare-40 ºC to +60 ºC
(-40 °F – +140 °F)

Construction (pendant model)

4 rânduri
Dimensions (DIA x H)170.2 mm x 162.4 mm
(6.7 in x 6.39 in)
Greutate1.88 kg (4.14 lb)
Construction materialHousing: Aluminum Bubble: Polycarbonate
Standard colorWhite (RAL 9003)

Construction (in-ceiling model)

4 rânduri
Dimensions (DIA x H)198 mm x 159.3 mm (7.8 in x 6.27 in)
Greutate1.81 kg (3.99 lb)
Construction materialHousing: SPCC Trim ring: PC/ABS Bubble: Polycarbonate
Standard colorWhite (RAL 9003)

Specificațiile sunt cele publicate de Bosch, cu etichetele traduse în română (preluate la 12.11.2026). Ce nu am tradus a rămas în engleză.

Documente oficiale

Denumiri și variante: CPP7.3, Cameras and Encoders

Întrebări frecvente

Ce card microSD acceptă?

Card microSD de până la 2 TB. Pentru înregistrare continuă folosește un card de tip „High Endurance”.

Se poate monta afară?

Da: are protecție IP65.

Cum se alimentează?

PoE (802.3at) sau 24 V AC, consum maxim 12 W.

Ce firmware are acum AUTODOME IP 4000i?

V7.94.0012. Link-ul oficial de descărcare este în tabelul de firmware de pe această pagină.

Caută alt model