Ajax Superior DoorProtect G3 Jeweller este o componentă de sistem de alarmă, listat de producător la „Opening detectors”.

Printre caracteristicile tehnice se numără funcționare între −10 și +40 °C. Aparatul cântărește 39 g.

Pentru Superior DoorProtect G3 Jeweller, Ajax nu oferă un fișier de firmware descărcabil. Mai jos scrie cum se actualizează.

Tabelul de specificații de mai jos conține toate datele tehnice publicate de producător, traduse în română.

Cum se actualizează Superior DoorProtect G3 Jeweller

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații Superior DoorProtect G3 Jeweller

Superior Jeweller data transfer protocol

Proprietary wireless protocol for transmitting commands, alarms, and events. An upgraded version of the Jeweller radio protocol for Ajax Superior devices, ensuring compliance with Grade 3 (EN 50131).
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Enhanced block encryption with a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.

Benzi de frecvență

865.0–868.0 MHz
868.0–868.6 MHz
868.7–869.2 MHz
869.4–869.65 MHz

Putere maximă radiată (ERP)

Până la 20 mW
Automatic power control to reduce power consumption and radio interference.

Modulație semnal radio

GFSK

Rază de comunicație radio

Până la 3,000 m
Between the device and a hub (or a range extender) in an open space. The maximum range depends on the hub model.

Comunicație criptată

All stored and transmitted data is protected with advanced encryption, ensuring both confidentiality and integrity.

Salt de frecvență

To prevent radio interference and jamming.

Tehnologie de comunicație Wings

Proprietary wireless communication technology for uploading firmware updates.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Data packet reload in case of transmission errors.
- Data packets delivery check.

Benzi de frecvență

865.0–868.0 MHz
868.0–868.6 MHz
868.7–869.2 MHz
869.4–869.65 MHz

Rază de comunicație radio

Până la 2,000 m
Between the device and a hub (or a range extender) in an open space. The maximum range depends on the hub model.

Comunicație criptată

All stored and transmitted data is protected with advanced encryption, ensuring both confidentiality and integrity.

Salt de frecvență

To prevent radio interference and jamming.

Sensitive elements

2 reed switches
1 accelerometer
1 magnetic masking sensor

Protection against reed switch chattering

The detector ignores vibrations lasting up to 0.15 s.
Reed switches
The magnet can be installed on the left or right side of the detector.

Input to connect an additional detector

Wired detector with the normally closed (NC) contact type and additional Roller shutter mode.
Additional detector connection

Shock sensor sensitivity

3 levels
Adjusted by a PRO or a user with admin rights in Ajax apps.
The detection radius depends on the material type:
- Framed glass window — 1.2 m (high sensitivity level), 1 m (low sensitivity level).
- Wooden plate — 1.2 m (high sensitivity level), 1 m (low sensitivity level).
- Concrete plate — 0.75 m (high sensitivity level), 0.5 m (low sensitivity level).
The smoother and cleaner the detection surface is, the better the detection radius is.
Tilt and shock sensitivity

Option to ignore single impact

Adjusted by a PRO or a user with admin rights in Ajax apps.

Tilt sensor activation threshold

from 5° – 25°
Adjusted by a PRO or a user with admin rights in Ajax apps.

Chime

When the system is disarmed, the siren emits a special sound to notify that the opening detectors are triggered.

Alarmă anti-sabotaj

Notifications of attempts to detach the detector from the surface or remove it from the mounting panel.

Magnetic masking sensor

The device detects an attempt to mask the main magnet of Superior DoorProtect G3 Jeweller with a fraudulent magnet.

Holding screw

secures the device on SmartBracket

Protecție anti-spoofing

Autentificare dispozitiv

Connection loss detection

after 36 s
Detection time depends on the Jeweller or Jeweller/Fibra settings.

Baterie

1 × CR123A
Pre-installed.

Tip

type C

Autonomie estimată a bateriei

Până la 4 years

Operating voltage range

2.3−3.2 V⎓

Nominal operating voltage

3 V⎓

Quiescent current consumption at nominal voltage

33 μA

Maximum current consumption at nominal voltage

7 mA

Peak current consumption at nominal voltage

27 mA

Full battery capacity

1,550 mAh

Tensiune la baterie descărcată

2.5 V⎓

Tensiune de revenire după descărcare

2.7 V⎓

Tensiune baterie la final de viață

2.3 V⎓
The device switches off.

Capacitate baterie la final de viață

150 mAh

Producător

Panasonic

Detector dimensions

103 × 22 × 21 mm

Magnet dimensions

103 × 22 × 21 mm

Weight of the detector

39 g

Interval temperatură de funcționare

from −10 °C – +40 °C

Umiditate de funcționare

Până la 75%

Clasă de protecție

IP30, IK04

Negru

Alb

Superior DoorProtect G3 Jeweller

SmartBracket mounting panel

CR123A battery (pre-installed)

Magnet

Connector for a third-party detector

Kit de montaj

Ghid de pornire rapidă

Conformitate cu standardele de alarmă

EN 50131-1:2006/A1:2009/A2:2017/A3:2020
EN 50131-2-6:2008
EN 50131-2-8:2016
EN 50131-5-3:2017
EN 50131-6:2017/A1:2021
PD 6662:2017
Certificate issued by TREZOR TEST s.r.o.

Grad de securitate (SG)

3
Certificate issued by TREZOR TEST s.r.o.

Directiva RED

EN 300 220-1 V3.1.1
EN 300 220-2 V3.2.1
Certificate issued by TIMCO Engineering, Inc.

Directiva RoHS

EN IEC 63000:2018
Test report issued by Shenzhen NTEK Testing Technology Co.

Directiva EMC

EN 301 489-1 V2.2.3
EN 301 489-3 V2.3.2
EN 301 489-17 V3.3.1
EN 55032:2015+A1:2020
EN 55035:2017+A11:2020
Certificate issued by TIMCO Engineering, Inc.

Directiva de joasă tensiune (LVD)

EN IEC 62368-1:2024+A11:2024
EN IEC 62479:2010
Certificate issued by TIMCO Engineering, Inc.

Clasă de mediu conform EN 50131

||
Certificate issued by TREZOR TEST s.r.o.

PSTI UK

Schedule 1

INCERT

T 031:2017+A1:2018+A2:2022
Certificate issued by Kiwa Nederland B.V.

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.