LightSwitch (3-way) [120] Jeweller – Rețelistică

Ajax · Rețelistică · Light switches

LightSwitch (3-way) [120] Jeweller – specificații și firmware

Ajax nu publică un fișier de firmware pentru acest model.

Înainte de actualizare: verifică pe eticheta aparatului modelul exact și versiunea hardware și folosește firmware-ul din regiunea aparatului (de exemplu Global sau Europa). Un firmware greșit poate bloca aparatul. Nu întrerupe alimentarea în timpul actualizării.

LightSwitch (3-way) [120] Jeweller este un echipament de rețea Ajax din categoria „Light switches”.

Pe scurt, aparatul are consum maxim de 500 W și funcționare între −10 și +40 °C.

Nu există un firmware public de la Ajax pentru LightSwitch (3-way) [120] Jeweller. Mai jos scrie cum se actualizează.

Mai jos găsești fișa tehnică completă, tradusă în română.

Cum se actualizează LightSwitch (3-way) [120] Jeweller

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații LightSwitch (3-way) [120] Jeweller

Components

Releu	Controls the power of a lighting appliance. LightCore (3-way) [120] Jeweller
Touch-sensitive panels	SoloButton (1-gang) [120] It is used when the switch is installed as a separate device. SoloButton consists of a front panel and a frame, coming as one component. CenterButton (1-gang) [120] It is used when the switch is installed between the device set. SideButton (1-gang) [120] It is used when the switch is installed on the right or left of the device set.
Frames	Frames for two, three, four, and five Ajax switches. Frame (2 seats) [120] Frame (3 seats) [120] Frame (4 seats) [120] Frame (5 seats) [120]

Configurare

Single switch	LightSwitch (3-way) [120] Jeweller is installed as a separate device.
Combined switch	LightSwitch (3-way) [120] Jeweller is combined as a set with other Ajax smart switches and installed into Frame side by side.

Touch-sensitive panel colors

	Negru
	RAL 9005
	Graphite
	RAL 7024
	Alb
	RAL 9003
	Ivory
	RAL 1013
	Fog
	RAL 7047
	Oyster
	RAL 9002
	Gri
	RAL 7004
	Olive
	RAL 7044
	RAL colors match actual colors as much as possible. However, they may slightly differ, so please only use them as a guide to the color choice.

Comunicație

Tehnologie de comunicație Jeweller	Proprietary wireless communication technology to transmit commands, alarms, and events. Key features: - Two-way communication. - Advanced anti-sabotage. - Block encryption featuring a dynamic key. - Instant notifications. - Remote control and configuration in Ajax apps.
Benzi de frecvență	905.0–926.5 MHz
Putere maximă radiată (ERP)	Până la 20 mW
Modulație semnal radio	GFSK
Rază de comunicație radio	Până la 1,100 m Between the device and a hub (or a range extender) in an open space.
Comunicație criptată	All stored and transmitted data are protected by block encryption featuring a dynamic key.
Salt de frecvență	To prevent radio interference and jamming.
Tehnologie de comunicație Wings	Proprietary wireless communication technology to update the firmware. Key features: - Two-way communication. - Advanced anti-sabotage. - Block encryption featuring a dynamic key. - Data packages reload in case of transmission errors. - Data packages delivery check.
Benzi de frecvență	905.0–926.5 MHz
Rază de comunicație radio	Până la 1,100 m Between the device and a hub (or a range extender) in an open space.
Comunicație criptată	All stored and transmitted data are protected by block encryption featuring a dynamic key.
Salt de frecvență	To prevent radio interference and jamming.

Caracteristici principale

Automation scenarios	- By arming/disarming - By schedule - By alarm - By temperature, humidity, or CO2 concentration* - By touching another LightSwitch / by pressing Button * Scenarios by humidity and CO2 concentrations are available when LifeQuality Jeweller is added to the system.
Operation without a neutral wire	LightSwitch (3-way) [120] Jeweller only needs a line (hot) wire to operate.
Minimum load power	20 W The value is calculated for LED light appliances.
Contactless touch-sensitive panel	LightSwitch (3-way) [120] Jeweller is activated when a hand gets as close as 15 mm from the panel.
Night backlight	Optional, can be turned off in the device settings in the Ajax app.
Protection against incompatible appliances	Triggers if lighting appliances have insufficient power (up to 20 W). If protection is triggered, LightSwitch (3-way) [120] Jeweller turns off the load and sends a notification to Ajax apps. For low-power lighting appliances, the kit includes a capacitor.

Recomandări

	The device is designed for indoor use only. A professional electrician should install the device.
	It is recommended to install a bundled capacitor to ensure stable operation of LightSwitch (3-way) [120] Jeweller and lighting appliance.

Protecție anti-sabotaj

Protecție anti-spoofing	Autentificare dispozitiv
Detecție pierdere comunicație	after 36 s Detection time depends on the Jeweller or Jeweller/Fibra settings.

Alimentare

Power supply voltage	120 V~, 60 Hz The device does not need a neutral wire to operate.
Average consumption	Până la 200 mW
Maximum power	Până la 500 W for incandescent light bulbs Până la 250 W for CFL/LED light bulbs For LightCore (3-way) [120] Jeweller.
Maximum load current	4.2 A
Overcurrent protection	more than 5 A If protection is triggered, LightSwitch (3-way) [120] Jeweller turns off the load and sends a notification to Ajax apps.
Temperature protection	more than +60 °C If protection is triggered, LightSwitch (3-way) [120] Jeweller turns off the load and sends a notification to Ajax apps.

Operating parameters

Interval temperatură de funcționare	from –10 °C – +40 °C
Umiditate de funcționare	Până la 75% with no condensation
Clasă de protecție	IP20
Form factor of the switch	NA form factor (120)

Dimensiuni

Releu	LightCore (3-way) [120] Jeweller — 98.4 × 41.9 × 33.4 mm
Touch-sensitive panels	SoloButton (1-gang) [120] — 115 × 71 × 10.6 mm CenterButton (1-gang) [120] — 114.4 × 45.5 × 10.6 mm SideButton (1-gang) [120] — 114.4 × 58 × 10.6 mm
Frames	Frame (2 seats) [120] — 115 × 117 × 6 mm Frame (3 seats) [120] — 115 × 163 × 6 mm Frame (4 seats) [120] — 115 × 209 × 6 mm Frame (5 seats) [120] — 115 × 255 × 6 mm

Weight

Releu	LightCore (3-way) [120] Jeweller — 69 g
Touch-sensitive panels	SoloButton (1-gang) [120] — 55 g CenterButton (1-gang) [120] — 31 g SideButton (1-gang) [120] — 34 g
Frames	Frame (2 seats) [120] — 22 g Frame (3 seats) [120] — 28 g Frame (4 seats) [120] — 35 g Frame (5 seats) [120] — 41 g

Conținut set

	LightSwitch (3-way) [120] Jeweller is a prefabricated device, with each component available for separate purchase. Components are easily installed by attaching to each other.

Standarde și certificări

ID FCC	2AX5VLCORENA1 Certification Issued Under the Authority of the Federal Communications Commission
ID IC	26860-LCORENA1 Certificate issued by TIMCO Engineering, Inc.

Compatibil cu

EN54 Fire Hub Jeweller, EN54 Fire ReX Jeweller, Hub 2 (2G) Jeweller, Hub 2 (4G) Jeweller, Hub 2 Plus Jeweller, Hub BP Jeweller, Hub BP Jeweller (without casing), ReX 2 Jeweller, ReX Jeweller, Superior Hub G3 Jeweller, Superior Hub Hybrid (2G), Superior Hub Hybrid (4G), Superior Hub Hybrid (4G) (without casing), Superior Hub Hybrid 2, Superior Hub Hybrid 2 (without casing), Superior MegaHub, Superior MegaHub (without casing), Superior ReX G3 Jeweller

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.