9151102CHRW este un dispozitiv de videointerfon 2N din categoria „Intercoms”.

În catalogul 2N apare ca „2N IP Force - 2 Buttons, HD Camera, Reader Ready”.

Specificațiile detaliate pentru 9151102CHRW se preiau zilnic din catalogul 2N și apar aici imediat ce sunt publicate.

2N oferă pentru 9151102CHRW firmware-ul V2.50.2, lansat la 02.10.2026. Fișierul se descarcă direct de pe serverele 2N; IPCCTV nu găzduiește firmware.

Aceeași versiune de firmware este publicată pentru 3 modele.

Firmware-ul se încarcă de obicei din interfața web a aparatului sau din software-ul de administrare al producătorului.

Firmware actual

Versiune	Data	Regiune	Descărcare și note
V2.50.2Firmware 2.50.2 - 2N IP Vario, Force, Safety · același fișier pentru 3 modele	02.10.2026	Global	Descarcă de la 2N Release notes 8 MB Note de versiune SHA-256: f02aa0dcf55c846dbef27d3c2a4f0b796b61fd6597e7d9236fca492fbd61bc0f Fișier: firmware_2_50_2_2n_ip_vario_force_safety.zip 2N OS version 2.50.2 for 2N Intercoms includes the following changes New Functions and Improvements Added support for new Wiegand module hardware revision. Essential Corrections Important bug fixes. 2N OS version 2.50.1 for 2N Intercoms includes the following changes Essential Corrections Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users. Fixed an issue where the ProfileStateChanged block in Automation functions caused an error after reboot. Added support for a new Vbus display revision. Improved ACS connection stability. Updated several internal libraries. Important bug fixes. 2N OS version 2.50.0 for 2N Intercoms includes the following changes Precautions to be taken during update to FW version 2.50.x For security reasons, network settings can no longer be modified using 2N Network Scanner. All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating. Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface. In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the id-kp-clientAuth Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network. Due to essential authentication updates for an improved user experience, you must restart the ACS server to restore connectivity for devices upgraded from a version lower than 2.49.0 to version 2.49.0 or higher. New Functions and Improvements Reception of In-Band (Audio) DTMF is now disabled by default to improve resilience against malicious attacks. STUN support has been added and can be configured under Calling > SIP # > Configuration . Added support for the Japanese language in the display UI of Answering Units and IP Style. Support for 2N Electronic Locks is now included as part of the standard firmware release. Essential Corrections Improved compatibility of outgoing H.264 and H.265 video streams. Private keys are no longer exposed via GET /api/mobilekey/config . Updated several internal libraries. Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection). Eliminated occasional audio distortions on IP Uni and IP Audio Kit devices. Fixed an intermittent issue where audio inputs could become swapped on IP Uni and IP Audio Kit devices. Devices no longer crash when

Versiuni anterioare

Versiune	Data	Regiune	Descărcare și note
V2.50.1Firmware 2.50.1 - 2N IP Vario, Force, Safety · același fișier pentru 3 modele	02.10.2026	Global	Descarcă de la 2N Release notes 8 MB Note de versiune SHA-256: b080eef21ac4dab1a1b20a429a04551d222fe4a66faebf0f1079ab711986c206 Fișier: firmware_2_50_1_2n_ip_vario_force_safety.zip 2N OS version 2.50.1 for 2N Intercoms includes the following changes Essential Corrections Fixed an issue with 2N Electronic Locks that limited the device directory to 2000 users. Fixed an issue where the ProfileStateChanged block in Automation functions caused an error after reboot. Added support for a new Vbus display revision. Improved ACS connection stability. Updated several internal libraries. Important bug fixes. 2N OS version 2.50.0 for 2N Intercoms includes the following changes Precautions to be taken during update to FW version 2.50.x For security reasons, network settings can no longer be modified using 2N Network Scanner. All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating. Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface. In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network. Due to essential authentication updates for an improved user experience, you must restart the ACS server to restore connectivity for devices upgraded from a version lower than 2.49.0 to version 2.49.0 or higher. New Functions and Improvements Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks. STUN support has been added and can be configured under `Calling > SIP # > Configuration`. Added support for the Japanese language in the display UI of Answering Units and IP Style. Support for 2N Electronic Locks is now included as part of the standard firmware release. Essential Corrections Improved compatibility of outgoing H.264 and H.265 video streams. Private keys are no longer exposed via `GET /api/mobilekey/config`. Updated several internal libraries. Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection). Eliminated occasional audio distortions on IP Uni and IP Audio Kit devices. Fixed an intermittent issue where audio inputs could become swapped on IP Uni and IP Audio Kit devices. Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`. Cached DNS entries for SIP registrars now expire i
V2.50.0Firmware 2.50.0 - 2N IP Vario, Force, Safety · același fișier pentru 3 modele	02.10.2026	Global	Descarcă de la 2N Release notes 8 MB Note de versiune SHA-256: da3486e9ba234377ce512cbf6d2e46f33f2540040aad0d0d78a49fafb0ca08d1 Fișier: firmware_2_50_0_2n_ip_vario_force_safety.zip 2N OS version 2.50.0 for 2N Intercoms includes the following changes Precautions to be taken during update to FW version 2.50.x Devices no longer emit audible beeps during boot or network state changes by default. If required, this behavior can be enabled under `Hardware > Audio > Startup and Network States Signalization`. For security reasons, network settings can no longer be modified using 2N Network Scanner. All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating. Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface. In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network. New Functions and Improvements Reception of `In-Band (Audio)` DTMF is now disabled by default to improve resilience against malicious attacks. STUN support has been added and can be configured under `Calling > SIP # > Configuration`. Added support for the Japanese language in the display UI of Answering Units and IP Style. Support for 2N Electronic Locks is now included as part of the standard firmware release. Essential Corrections Improved compatibility of outgoing H.264 and H.265 video streams. Private keys are no longer exposed via `GET /api/mobilekey/config`. Updated several internal libraries. Web configuration pages for Automation features now load correctly even when the device is offline (without an active internet connection). Eliminated occasional audio distortions on IP Uni and IP Audio Kit devices. Fixed an intermittent issue where audio inputs could become swapped on IP Uni and IP Audio Kit devices. Devices no longer crash when a user with a limited validity period presents their card, provided the associated RFID reader extension module has `Door` set to `Not used`. Cached DNS entries for SIP registrars now expire immediately and correctly when the registrar IP address changes, preventing registration failures. Fixed an issue where devices could lose and reacquire their IP address via DHCP twice after a factory reset and subsequent reboots. Resolved a device crash that could occur when sending emails using specific SMTP server configurations. The `snmpget` function now works correctly on devices using SNMPv3. Devices now correctly process `Too Br
V2.48.0Firmware 2.48.0 - 2N IP Vario, Force, Safety - 2N Fortis support · Etichetă regiune: Fortis · același fișier pentru 3 modele	12.08.2025	Global	Descarcă de la 2N Release notes 7 MB Note de versiune SHA-256: eb32f5d74156cbc84be659ce13ed58298b62f4e7eda1aed348a09dd3b6347b08 Fișier: firmware_2_48_0_2n_ip_vario_force_safety.zip 2N OS version 2.48.0 for 2N IP Access Control Systems includes the following changes Precautions to be taken during update to FW version 2.48.x All 2N OS devices (except those on the original platform: IP Vario, IP Force, IP Safety, IP Solo, IP/LTE Verso, IP Base, IP Uni, IP Audio Kit, IP Video Kit, Access Unit, SIP Speaker) can no longer be downgraded below version 2.47.0 after updating. Devices no longer accept certificates signed with 1024-bit RSA keys. These certificates are removed during the update and must be replaced with certificates using at least 2048-bit RSA or ECC keys. Services relying on weaker certificates will stop functioning, and a warning will appear next to the certificate selection parameter in the web interface. In EAP-TLS mode, 802.1x no longer supports RADIUS certificates containing the `id-kp-clientAuth` Extended Key Usage. If such certificates are used, they will be rejected after the update, resulting in the device being unable to authenticate and connect to the network. New Functions and Improvements Support for 2N Electronic Locks with Secure Cards added. Devices can now generate Certificate Signing Requests (CSR) directly from the web interface under System > Certificates > CSR. Changing the web interface password now requires entering the current password. As a result, restoring a configuration will no longer change the password. Auto Provisioning can change the password only if the current one is still set to default. A firewall has been added to ARTPEC-based devices: IP Style, IP Verso 2.0, IP One, Access Unit QR, and IP Force 2.0. Essential Corrections Improved certificate handling. Prevented some certificates from reverting to factory defaults after a software factory reset (without selecting Network Settings), avoiding potential network disconnection. Removed certain unnecessary syslog messages. Improved formatting of exported Directory CSV files. The `UserAuthorized` Automation block now behaves correctly even for failed authorizations. DNS request lengths can now be up to 255 characters. RADIUS certificates are now validated properly in EAP-TLS/MSCHAPv2 scenarios. Commas in the Subject field of the `SendEmail` Automation block no longer cause the subject line to be truncated. Improved SMTP reliability. Enhanced handling of large-scale user directory operations. Important bug fixes.

Specificațiile sunt cele publicate de 2N, cu etichetele traduse în română (preluate la 06.11.2026). Ce nu am tradus a rămas în engleză.