MOBOTIX c ONE NurseAssist este un echipament, listat de producător la „MOBOTIX ONE / MOBOTIX ONE c1A S”.

Din fișa tehnică reținem: alimentare PoE (802.3af) și protecție IP40. Aparatul cântărește 360 g și are dimensiunile 120 x 54 mm/4.72 × 2.13 in.

MOBOTIX nu publică un fișier de firmware pentru c ONE NurseAssist. Mai jos scrie cum se actualizează.

Tabelul de specificații de mai jos conține toate datele tehnice publicate de producător, traduse în română.

Cum se actualizează c ONE NurseAssist

Firmware-ul se încarcă de obicei din interfața web a aparatului sau din software-ul de administrare al producătorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații c ONE NurseAssist

Name

MOBOTIX c ONE NurseAssist powered by Kepler Vision Technologies

Order Code

Mx-ONE-c1A-S-NurseAssist
NOTE!
This order code covers the NurseAssist sensor hardware only. Analytics functionality requires a separate subscription license (Basic, Extended, or Lying Position).

Product Name

Kepler NurseAssist App

Order Code

Basic Starter: Mx-ONE-APP-KEP-NUA-1S/ -2S/ -3S/ -4S/ -5S
Extended: Mx-ONE-APP-KEP-NUA-EXT-1/ -2/ -3/ -4/ -5
Lying Position: Mx-ONE-APP-KEP-NUA-LPO-1/ -2/ -3/ -4/ -5

Supported MOBOTIX Cameras

c ONE NurseAssist

Minimum Camera Firmware

v8.2.x.x

MxManagementCenter compatibility

• min. MxMC v2.9.x
• Event Search: Smart Data Interface license included

NurseAssist Basic

• monitoring of the well-being of patients in private rooms, corridors and common areas of Healthcare facilities.
• minimization of reaction times due to decentralized state-of-the-art fall detection.
• prevention of accidents through person down, person in bed and person out of bed event.
• automatized detection and localization of the bed in the patient's room.
• GDPR compliant operation through event-controlled obscuring of live and recorded images.
• Dynamic masking of a person in bed as additional privacy protection measure.
• Continuous monitoring of sensor functions and analysis processes with the help of the App Heartbeat
• * IP-based bidirectional communication via integrated microphone and speaker
• * Noise level analysis enables the detection of loud ambient noise (e.g., loud shouting).
• Integrated shock detector for detecting physical tampering or vibrations
• Additional device health monitoring functions, including connectivity and uptime monitoring
• Configurable system status display via sensor status LED
• REST API interface enables deep integration and remote control of all sensor functions
NOTE!
*The sensor's audio functions are disabled by default. If required, they can be enabled by an authorized administrator.

NurseAssist Extended

Plug-In license required to extend the NurseAssist status and alarm notifications with the following functions:
• Person is getting up from bed
• Person sits on the edge of the bed
• Person is getting up from a chair
• Person has entered the bathroom / is in the bathroom
• Person has left the room
• Person has entered the room
• Bed is not recognized / is not present
• Distinction between person lying and sitting on the floor
NOTE!
The Plug-In license requires MOBOTIX NurseAssist Smart Sensor or licensed Kepler
NurseAssist Certified App.

NurseAssist Lying Position

License to extend the NurseAssist Basic status and alarm notifications with the following functions:
• Continuous monitoring of a person’s lying position in bed (e.g., back, left side, right side)
• Monitoring of prolonged stay in the same position
• Notification if a person has not changed it’s lying position for a defined period of time
• Support for individualized care plans
• Integration into existing alarm logic and reporting

Room size

Max. 25m2 assuming an almost square room (e.g. 5x5 m) by radius of 4 m - long and narrow rooms will not work.

Required installation position (camera)

ceiling-mounted

Recommended installation height (camera)

2.0m - 3.5m

Mounting distance from bed

0.5m - 3.0m

Mounting distance from wall

> 70cm

Image sensor (DN)

4K (1:1) effective max. resolution 2160x2160

Light sensitivity

Day Mode (Color): 0,1 lx @ 1/60 s; 0,005 lx @ 1 s
Night Mode (B/W): 0,02 lx @ 1/60 s; 0,001 lx @ 1 s

Exposure control

Manual and automatic mode
1 s – 1/16,000 s

IP / NEMA protection class

IP40

Intended use

Not intended for use in hazardous areas (Ex areas)

Interval temperatură de funcționare

-20 – 40 °C/-4 – 104 °F

Min. cold start temperature

-20 °C/-4 °F

Umiditate relativă

5 % – 95 %, fără condensare

Internal DVR Storage

Internal microSD card (SDHC/SDXC), 64 GB out-of-the-box, max. 2 TB.

Allowed cable dimensions for cables connected to the PCB terminals

Conductor cross section
• AWG: 26 – 20
• Rigid: 0.14 – 0.5 mm2
• Flexible: 0.14 – 0.5 mm2
• Flexible with ferrule without plastic sleeve: 0.25 – 0.34 mm2
• Flexible with ferrule with plastic sleeve: 0.14 – 0.25 mm2

Input

Contact Closure (no galvanic isolation necessary) or up to 30 Vrms AC /
50V DC
Switching thresholds
• Input >1.6 V results in detected HIGH
• Input <0.9 V results in detected LOW (after a HIGH)
Max. length for cables: 50m

Output

1x dry contact, form A (max 30 Vrms / max, 50V DC/ 60 W/ 2A DC)

Microphone/Speaker

Integrated microphone:
• Sensitivity: -35 dB +/-4 dB (0 dB = 1 V/pa, 1 kHz)
Integrated speaker:
• 0.9 W at 8 Ohm
1 external speaker optional, max. cable length 3 m/10 ft

Integrated illumination

IR LEDs, 850 nm, up to 25 m2/269 ft2
(may be more depending on scene)
White light for emergency lighting

Tampering Detection

Integrated Shock Sensor

Consum maxim

12.95 W

Electrical surge protection

via Overvoltage Protection Box (not part of the scope of delivery)

Standard PoE

PoE (802.3af-2003), Class 3

Interfaces

• Ethernet 1000Base-T (RJ45 according to EIA/TIA-568B)
• USB-C / USB 2.0 High Speed
Power Output 5.1 V / 0.9 A / 4.5 W
• 12-24 V DC power supply
• Digital I/O: 1 Input / 1 Output
NOTE!
I/O terminal block Mx-ONE-A-IO-c1 is not included and has to be ordered separately!

Status LED

Multicolor (7 colors)

Mounting Options

In-ceiling mountable; on-wall via optional accessories

Dimensions (Ø x height)

120 x 54 mm/4.72 × 2.13 in

Greutate

360 g

Carcasă

PBT-30GF

Standard accessories

1 Ethernet patch cable, 50 cm/19.7 in (installed)
1 SD card 64 GB (installed)
1 Important Safety Information
1 Sticker with IP address of camera
1 Camera connection flyer
1 MultiTool module wrench
1 Disassembly tool

Detailed technical documentation

www.mobotix.com > Services > Download Center > Marketing & Documentation

MTBF

100,000 hours

Certificări

EN 55032, EN 55035, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-
6-4, EN 62368-1, EN 63000, AS/NZS CISPR32, 47 CFR Part 15b, NRTL

Protocoale

DHCP (client and server), DNS, ICMP, IGMP v3, IPv4, IPv6, HTTP, HTTPS,
FTP, FTPS, NFS, NTP (client and server), MQTT, RTP, RTCP, RTSP, SFTP,
SIP (client and server), SMB/CIFS, SNMP, SMTP, SSL/TLS 1.3, TCP, UDP,
VLAN, VPN, Zeroconf/mDNS

Manufacturer warranty

5 years

Available video codecs

H.264, H.265, MxPEG+, MJPEG

Image resolutions

CIF (320x240; 4:3), nHD2 (360x360; 1:1), nHD (640x360; 16:9), VGA (640x480; 4:3), SVGA
(800x600; 4:3), XGA (1024x768; 4:3), HD2 (720x720; 1:1), HD (1280x720; 16:9), Mega
(1280x960; 4:3), least FHD2 (1080x1080; 1:1), FHD (1920x1080; 16:9), QXGA (2048x1536;
4:3), UHD2 (2160x2160; 1:1), Custom Size

Multi streaming

H.264, H.265 with triple streaming

Multicast stream via RTSP

Max. frame rate

MxPEG: 20@4K, H.264: 30@4K, H.265: 30@4K

WDR

Până la 120 dB

Software features

• H.264, H.265 Multistreaming
• Multicast stream via RTSP
• Digital pan, tilt, zoom/vPTZ (up to 8x zoom)
• Genetec protocol integration
• Programmable exposure zones
• Snapshot recording (pre/post-alarm images)
• Continuous recording
• Event recording
• Time-controlled flexible event logic
• Weekly schedules for recordings and actions
• Event video and image transfer via FTP and email
• Playback and QuadView via web browser
• Animated logos on the image
• Master/Slave functionality
• Privacy zone scheduling
• Remote alarm notification (network message)
• Programming interface (HTTP API)
• MxMessageSystem
• MQTT (Message Queuing Telemetry Transport)

ONVIF compatibility

Profile S/G/T

Master/Slave functionality

Remote alarm notification

Email, MQTT, MxMessageSystem, network message (HTTP/HTTPS), SNMP, SIP

DVR/image storage management

• On internal microSD card
• On external USB and NAS devices
• Different streams for live image and recording

Camera and data security

FIPS 140-3 validated encryption (OpenSSL 3.1.2, NIST CMVP #4985), VPN with FIPS-certified library, HTTPS with custom X.509 certificates (TLS), AES encryption at rest
(microSD / NAS), role-based access control, IP-level access control list, audit trail / web server access log, intrusion detection with automatic IP lockout, IEEE 802.1X port-based network access control, digital image signature

Firmware Tampering Detection

Digital Signature

Video motion detection

MxActivitySensor

Version 1.0, 2.1

3rd Party Nurse Call Systems

Extensively integrated; documented integrations available at:
community.mobotix.com > MOBOTIX 7 Certified Apps > Kepler NurseAssist

MOBOTIX HUB

Da, compatible with MOBOTIX HUB NurseAssist Dashboard www.mobotix.com > Services > Download Center > Software Downloads

MxManagementCenter

Yes (latest version recommended) www.mobotix.com > Services > Download Center > Software Downloads

MOBOTIX LIVE App

Da, available in Google Play Store (Android) and Apple App Store (iOS).

3rd Party VMS Software

See ONVIF Profile S/G/T specification

Specificațiile sunt cele publicate de MOBOTIX, cu etichetele traduse în română (preluate la 05.11.2026). Ce nu am tradus a rămas în engleză.

c ONE NurseAssist – specificații și firmware

Cum se actualizează c ONE NurseAssist

Specificații c ONE NurseAssist

Order Information

Kepler NurseAssist App - Specifications

Hardware

Image and Video Properties

General Software Features

Further Video Analysis

Video Management Software

Documente oficiale

Modele din aceeași serie

Caută alt model