Hikvision DS-3WAP5212-EI este un echipament de rețea, listat de producător la „Transmission / Wireless Access Point”.

Din fișa tehnică reținem: alimentare PoE (802.3at), consum maxim de 18 W și funcționare între 0 și +40 °C. Aparatul cântărește 360 g și are dimensiunile Ø220 mm × 49.7 mm (excluding bracket）.

Hikvision oferă pentru DS-3WAP5212-EI firmware-ul V1.5.610 build 261022, lansat la 22.10.2026. Fișierul se descarcă direct de pe serverele Hikvision; IPCCTV nu găzduiește firmware.

Firmware-ul se încarcă din interfața web a aparatului (meniul de întreținere / upgrade), din SADP sau iVMS-4200 ori, la înregistratoare, de pe un stick USB din meniul local.

Mai jos găsești fișa tehnică completă, tradusă în română.

Versiune

Data

Regiune

Descărcare și note

V1.5.610 build 261022Firmware_V1.5.610_261022

22.10.2026

Global

Descarcă de la Hikvision

Versiune

Data

Regiune

Descărcare și note

V1.5.609 build 260909Firmware_V1.5.609_260909

09.09.2026
retras din lista Hikvision după 04.11.2026

Global

Descarcă de la Hikvision (dacă mai există)

Specificații DS-3WAP5212-EI

General

Greutate netă	0.36 kg (0.79 lb)
Greutate brută	0.6 kg (1.32 lb)
Mod de montaj	Montaj pe tavan
Temperatură de funcționare	0°C – 40°C (32°F – 104°F)
Umiditate de funcționare	10% – 90% (no condensation)
Temperatură de depozitare	-40°C – 70°C (-40°F – 158°F)
Umiditate de depozitare	5% – 95% (no condensation)
Dimensiuni produs (L × Î × A)	Ø220 mm × 49.7 mm (excluding bracket）
Conținut pachet	1200 M Access Point × 1, Screw Pack × 1, Installation bracket × 1, Quick Start Guide × 1, Regulatory Compliance and Safety Information × 1
Mod de alimentare	DC power supply: 12 V, 1.5 A; PoE power supply: IEEE 802.3at;
Consum	Standby Power Consumption: 4W Typical Power Consumption: 9W Maximum Power Consumption: 18W

Parametri wireless

Wireless Speed	Max: 1167 Mbps; 2.4G: 300 Mbps; 5G: 867 Mbps;
Standard wireless	Wi-Fi 5
Working Frequency Band	Radio 1: 5G (11a/n/ac); Radio 2: 2.4G (11b/g/n);
Lățime de bandă	2.4G: Auto/20/40 MHz; 5G: Auto/20/40/80 MHz;
Recommended Coverage Range	Recommended Coverage Range: 140 m², the radius in an open environment is 25 meters. Note: The signal coverage range is greatly affected by the environment. For example, walls, glass doors, and other obstacles will affect the signal coverage. The above - mentioned values are for reference only.
Modulație	OFDM: BPSK @ 6/9 Mbps, QPSK @ 12/18 Mbps, 16-QAM @ 24 Mbps, 64-QAM @ 48/54 Mbps DSSS: DBPSK @ 1 Mbps, DQPSK @ 2 Mbps, and CCK @ 5.5/11 Mbps MIMO-OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Max. Number of Connected Clients	128
Recommended Number of Connected Clients	80
Transmitting Power	2.4G: Combined power: 28 dBm; 5G: Combined power: 28 dBm; Note: The actual transmission power varies according to regulations in different countries and regions;
Securitate wireless	WPA2-PSK, WPA-WPA2-PSK
Antenă	2.4 GHz: 2 built-in omnidirectional antennas 5 GHz: 2 built-in omnidirectional antennas
Antenna Gain	2.4 GHz: 3.5 dBi 5 GHz: 4.5 dBi
RF Design	Dual-radio 4 spatial streams 2.4G: 2 × 2, MU-MIMO 5G: 2 × 2, MU-MIMO
FEM	2.4 GHz: 2 x eFEM 5 GHz: 2 x eFEM

Specificații hardware

Porturi	1 × Gigabit PoE in port, 1 × Gigabit RJ45 port
Resetare	1 × Reset hole

Specificații software

Max. Number of Wireless SSIDs	7
Internet Access Mode	DHCP,Static
VLAN ID Range	1~4000
Max. Number of VLANs	8

Funcții software

Operation Mode	AP mode (default); Routing mode;
Wireless Management	Support wireless configuration; Support RF configuration; Support Health Mode; Support guest SSID; Support wireless 802.11k/v roaming; Support wireless optimization; Support wireless SSID speed limit; Support wireless RF speed limit; Support wireless intelligent speed limit; Support wireless terminal speed limit; Support weak signal access control; Support weak signal to kick offline; Support roaming sensitivity adjustment; Support wireless access control; Support wireless terminal association; Support Band steering; Support AP load balancing; Support smart antenna technology (beamforming), improving the signal's strength on clients; Support Wireless MESH; Support LeaderAP; Support Layer 2 Isolation; Support 5G Priority;
Interfață	Support uplink port VLAN; Support MAC address modification; Support LAN configuration; Support Port VLAN; Support QoS;
IP Services	Support DHCP Client; Supports DHCP Server; Support LLDP; Support SADP;
Portal Authentication	Support Portal Authentication;
Service and Support	Support NAT Traversal; Support Audit Log; Support Fault Diagnosis; Support Fault Alarm; Support One-Click Fault Collection; Support Network Diagnostic Tools; Support SSH; Support Cloud Service Diagnosis; Support Local Upgrade; Support Online Upgrade; Support Cloud Service; Support App Management; Support CAPWAP DTLS encryption;

Certificări

Compatibilitate electromagnetică (EMC)	CE-EMC (EN 55032:2015/A1:2020 EN 55035:2017/A11:2020 EN IEC 61000-3-2:2019/A2:2024 EN 61000-3-3:2013/A2:2021 EN 50130-4:2011/A1:2014)
Siguranță	CB (IEC 62368-1: 2018), CE-LVD (EN 62368-1:2014/A11:2017)
Chimie baterie	CE-RoHS (2011/65/EU), WEEE (2012/19/EU), Reach (Regulation (EC) No.1907/2006)
Radio	EN 300 328, EN 300 440, EN 301 893, EN 301 489-1, EN 301 489-3, EN 301 489-17, EN 61000-3-3: 2013+ A1:2019+A2: 2021, EN IEC 61000-3-2: 2019+A1: 2021+A2: 2024, EN IEC 62311: 2020

Specificațiile sunt cele publicate de Hikvision, cu etichetele traduse în română (preluate la 05.11.2026). Ce nu am tradus a rămas în engleză.