Modelul DS-3E1510P-SI-8P2F face parte din gama Hikvision, categoria „Transmission / Network Switches”.

Din fișa tehnică reținem: alimentare PoE (802.3af), consum maxim de 120 W și funcționare între 0 și +45 °C. Aparatul cântărește 580 g și are dimensiunile 217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'').

Ultima versiune de firmware publicată de Hikvision pentru DS-3E1510P-SI-8P2F este V3.3.3 build 260119, din 19.01.2026 (regiunea Global). Mai jos găsești link-ul oficial de descărcare, notele de versiune și versiunile anterioare.

Firmware-ul se încarcă din interfața web a aparatului (meniul de întreținere / upgrade), din SADP sau iVMS-4200 ori, la înregistratoare, de pe un stick USB din meniul local.

Tabelul de specificații de mai jos conține toate datele tehnice publicate de producător, traduse în română.

Firmware actual

Versiune

Data

Regiune

Descărcare și note

V3.3.3 build 260119Firmware_V3.3.3_260119

19.01.2026

Global, Europa

Descarcă de la Hikvision

Versiuni anterioare

Hikvision publică doar versiunea actuală pentru acest model. Când apare o versiune nouă, o păstrăm pe cea veche aici.

Specificații DS-3E1510P-SI-8P2F

Carcasă

Metal material

Greutate netă

0.58 kg (1.28 lb)

Greutate brută

1.37 kg (3.02 lb)

Dimensiuni (L × Î × A)

217.6 mm × 27.6 mm × 108.5 mm (8.57'' × 1.09'' × 4.27'')

Temperatură de funcționare

0 °C – 45 °C (0 °F – 113 °F)

Temperatură de depozitare

-40 °C – 85 °C (-40 °F – 185 °F)

Umiditate de funcționare

5% – 95% (no condensation)

Umiditate relativă

5% – 95% (no condensation)

Alimentare

54 V DC, 2.22 A

Mod de montaj

Desk-Mounted

Consum maxim

120 W

Consum în repaus

5 W

Protecție la supratensiune

6 kV

Porturi

8 × Gigabit PoE port,2 × Gigabit fiber optical port

Tabelă de adrese MAC

8 K

Capacitate de comutare

20 Gbps

Rată de redirecționare pachete

14.88 Mpps

Memorie cache internă

4.1 Mbits

Rază lungă

Ports 1 – 8: up to 300 m.
Long range performance may vary depend on camera model or cable condition.

Izolare porturi

Ports 1 – 10: port isolation mode to improve network security
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 – 8: auto detect and restart the cameras that do not respond.

Agregare legături

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 8 aggregation groups.

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.
Support port-based priority configuration.
Support SP, WRR priority schedule mode.

Prevenire bucle

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Support 802.1w RSTP.
Support G.8032 ERPS.

VLAN

VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.

Întreținere sistem

Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Support 802.1ab LLDP for peer device discovery.
Support SNMP v1/v2c/v3 for third-party management platform access.
Support port mirroring for fault locating.

Port Rate-Limiting

Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.

Storm Control

Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.
Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

DHCP Snooping

DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.

ACL

Support ACL definitions based on source/destination MAC address, source/destination IP address, IP protocol type.
Support ACL application on ports.
Support IPv4 ACL and MAC ACL configurations.
Support inbound ACLs.

IPSG

IPSG can control the security of port access device.
Support port, MAC, IP binding.
Support 256 security entries.

Standard PoE

IEEE 802.3af,IEEE 802.3at

Pini alimentare PoE

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

Port PoE

PoE: Ports 1 – 8

Putere maximă pe port

30 W

Buget de putere PoE

110 W