DS-3E1505P-EI/M(C) este un echipament de rețea Hikvision din categoria „Transmission / Network Switches”.

Câteva date tehnice importante: alimentare PoE (802.3af), consum maxim de 50 W și funcționare între 0 și +40 °C. Fizic, cântărește 260 g și are dimensiunile 121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'').

La ultima verificare, cel mai nou firmware pentru DS-3E1505P-EI/M(C) era V3.4.9 build 260820 (20.08.2026). Pagina se actualizează zilnic din lista oficială Hikvision.

Firmware-ul se încarcă din interfața web a aparatului (meniul de întreținere / upgrade), din SADP sau iVMS-4200 ori, la înregistratoare, de pe un stick USB din meniul local.

Mai jos găsești fișa tehnică completă, tradusă în română.

Firmware actual

Versiune

Data

Regiune

Descărcare și note

V3.4.9 build 260820Firmware_V3.4.9_260820

20.08.2026

Global

Descarcă de la Hikvision

Versiuni anterioare

Hikvision publică doar versiunea actuală pentru acest model. Când apare o versiune nouă, o păstrăm pe cea veche aici.

Specificații DS-3E1505P-EI/M(C)

Carcasă

Metal

Greutate netă

0.26 kg (0.57 lb)

Greutate brută

0.75 kg (1.65 lb)

Dimensiuni (L × Î × A)

121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')

Temperatură de funcționare

0 °C – 40 °C (32 °F – 104 °F)

Temperatură de depozitare

-40 °C – 85 °C (-40 °F – 185 °F)

Umiditate de funcționare

5% – 95% (no condensation)

Umiditate relativă

5% – 95% (no condensation)

Alimentare

54 V DC, 0.92 A

Consum maxim

50 W

Consum în repaus

1 W

Protecție la supratensiune

6 kV

Mod de montaj

Desk-Mounted,Wall-Mounted

Porturi

4 × Gigabit PoE port,1 × Gigabit RJ45 port

Tabelă de adrese MAC

4 K

Capacitate de comutare

14 Gbps

Rată de redirecționare pachete

10.42 Mpps

Memorie cache internă

2 Mbits

Rază lungă

Ports 1 – 4: up to 300 m.
Long range performance may vary depend on camera model or cable condition.

Izolare porturi

Ports 1 – 5: port isolation mode to improve network security
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 – 4: Auto detect and restart the cameras that do not respond.

Agregare legături

Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 2 aggregation group(s).

QoS

QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.
Support port-based priority configuration.
Support SP and WRR priority scheduling modes.
Support DSCP-based QoS policy.

Prevenire bucle

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Support 802.1w RSTP.

VLAN

VLAN is used for network scale planning and network health improvement.
Support 802.1Q.
Configurable VLAN ID from 1-4094.
Support Trunk, Access port mode.
Support Max. 32 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Display the port rate.
2. Display the port bandwidth utilization rate.
3. Display the PoE power usage.
4. Display topology information.
5. Display the alarm status.
6. Restart ports and devices.
7. Enable port long-rage mode.
8. Remotely upgrade the device.

Întreținere sistem

Support device management via web.
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.
Support Super IP, which is a configurable IP address (default: 10.180.190.200) for direct access.
Support management via Hik-Central Pro.
Support remote management via Hik-Partner Pro.
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.
Support 802.1ab LLDP for peer device discovery.
Support port mirroring for fault locating.

DHCP Snooping

DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.

Standard PoE

IEEE 802.3af, IEEE 802.3at

Pini alimentare PoE

End-span: 1/2(-), 3/6(+)

Port PoE

PoE: Ports 1 – 4

Putere maximă pe port

30 W

Buget de putere PoE

45 W

PoE Power Saving

Power conservation is achieved by scheduling PoE to be enabled or disabled so that the PoE port(s) will cut off power to IPCs during idle periods.

Perpetual PoE

Suportat
PoE remains active during system reboot, except in cases of power outage or PSE firmware upgrade.

Compatibilitate electromagnetică (EMC)

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)

Siguranță

UL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)

Chimie baterie

CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Specificațiile sunt cele publicate de Hikvision, cu etichetele traduse în română (preluate la 04.11.2026). Ce nu am tradus a rămas în engleză.