Firmware XNP-6040H

Versiune arhivată (Hanwha o păstrează pentru descărcare; recomandă ultima versiune).

Versiune arhivată (Hanwha o păstrează pentru descărcare; recomandă ultima versiune).

Versiune arhivată (Hanwha o păstrează pentru descărcare; recomandă ultima versiune).

New Features:
- Added an SFTP option to Protocol in FTP configuration under Events > FTP/E-mail in the web viewer Applies to : XNP-6040H
- Added a function to transmit even-related video footage via FTP/SFTP when the profile of the H.264 or H.265 codec is set to event profile Applies to : XNP-6040H
- Added a vendor class entry box in Basic > IP & Port > IP address (This box appears only when DHCP is selected under IP type ) Applies to : XNP-6040H
- Added a function of creating an FTP file name by selecting IPAddress , YY , MM , DD , hh , mm , ss , or RuleIndex in Event > FTP/E-mail Applies to : XNP-6040H
- Added an option to type GPS coordinates (longitude, latitude). (For PTZ models, go to Video & Audio > Location setup ; for non-PTZ models, go to System > Product information ). Applies to : XNP-6040H
- Added the Day/Night mode > Day and Day/Night mode > Night options to Follow-up action under Preset setup in PTZ > PTZ setup > Preset . (The IR mode in Video & Audio > Camera setup changes automatically depending on Night or Day setting.) Applies to : XNP-6040H
- Added a function where an option you selected in Category in Analytics > Sound classification can become an option for Event trigger in Event > Event rule Applies to : XNP-6040H
- Updated video profile section under Basic > Video profile in the web viewer to allow configuration of GOV length , Entropy coding , Dynamic GOV , and Dynamic FPS options under the Advanced section, even when Edge recording profile is selected in the Profile type list Applies to : XNP-6040H
- Excluded TLS 1.0 & 1.1 from default settings Applies to : XNP-6040H
- Added a function that generates options in Event > Event rule > Event trigger based on rules configued in Analytics > Motion detection or Analytics > IVA Applies to : XNP-6040H
- Added individual rule (line, area) options in IVA to the Event trigger section of Event > Event rule in the web viewer Applies to : XNP-6040H
- Added support for MQTT Applies to : XNP-6040H
- Added Connection type option to the IP setup under Basic > IP & Port Applies to : XNP-6040H
- Improved PTZ auto run by expanding the wait time setting range—one of the execution conditions—to 3 hours Applies to : XNP-6040H

Improvements:
- Upgraded the version of Open platform Applies to : XNP-6040H
- Changed the specifications to allow continuous reconnection attempts when the NAS is disconnected Applies to : XNP-6040H
- Added support for passwords up to 64 characters Applies to : XNP-6040H
- Added the Noise reduction feature that reduces audio noise Applies to : XNP-6040H
- Added options to configure GOV, dynamic GOV, and dynamic FPS in the recording profile. Depending on the configuration, video may not be recorded properly. Applies to : XNP-6040H
- Added support for TLS versions 1.2 and 1.3 Applies to : XNP-6040H
- Improved PTZ functionality to enable configuring a wait time of up to 3600 seconds before

Versiune arhivată (Hanwha o păstrează pentru descărcare; recomandă ultima versiune).

New Features:
- Changed to the FE binary where Onsemi motor driver IC was replaced with VM107 due to the discontinuation of the driver IC Applies to : XNP-6040H, XNP-6040HW
- Impossible to downgrade the firmware using VM107 to the earlier firmware using the Onsemi motor driver IC Applies to : XNP-6040H, XNP-6040HW
- Resolved the iris adjustment and flicker issues that arose following the application of VM107 Applies to : XNP-6040H, XNP-6040HW

Versiune arhivată (Hanwha o păstrează pentru descărcare; recomandă ultima versiune).

New Features:
- Changed to the FE binary where Onsemi motor driver IC was replaced with VM107 due to the discontinuation of the driver IC Applies to : XNP-6040H, XNP-6040HW
- Impossible to downgrade the firmware using VM107 to the earlier firmware using the Onsemi motor driver IC Applies to : XNP-6040H, XNP-6040HW
- Resolved the iris adjustment and flicker issues that arose following the application of VM107 Applies to : XNP-6040H, XNP-6040HW

Versiune arhivată (Hanwha o păstrează pentru descărcare; recomandă ultima versiune).

Versiune arhivată (Hanwha o păstrează pentru descărcare; recomandă ultima versiune).

Versiune arhivată (Hanwha o păstrează pentru descărcare; recomandă ultima versiune).

Versiune arhivată (Hanwha o păstrează pentru descărcare; recomandă ultima versiune).

Versiune arhivată (Hanwha o păstrează pentru descărcare; recomandă ultima versiune).