Firmware VIDEOJET decoder 7000, VJD-7513

New Features:
• Keyboard layout AZERTY is now supported as well when operations like ‘factoryreset’ or ‘clearconfig’ needs to be performed via the login window. Note: Configuration Manager 7.77 supports ‘Reboot’, ‘Restore settings’ and ‘Factory default’ operations for your convenience

Changes:
• The way the decoder handles VOCS client requests is improved by adjusting timeouts and making the management of session descriptions more reliable
• Swapping background and foreground cameo on first frame from a Bosch panoramic camera is supported again 3

SHA256: C4598D15ABF731467DB06F1AA4E500BBF8D777FBD0C6978776C73EDBA094073A

New Features:
• The Improved configuration of the IP Matrix with ONVIF cameras includes selection of streaming profile and protocol and verification of all settings. Requires Configuration Manager 7.76
• Active PTZ operations (especially when using a PTZ keyboard joystick) will now be stopped when the active camera is disconnected or when user activates a different video panel for PTZ control. This avoids permanent panning of dome cameras when user switches the video panel focus while the joystick is not released and back in center position
• Memory overload protection enables the decoder to still operate when video memory consumption is about to exceed available memory by denying additional connection requests. This feature can be activated in future with a Configuration Manager version greater than 7.76
• The bit rate of the Video Capture Service (VOCS) can be configured

Changes:
• For a better video experience, the video analytics attribute overlay for object class is switched off, whereas the attributes bounding boxes and trajectories remain on
• During MonitorWall application startup, video connection requests that occur within the first few seconds after startup, are not denied under certain circumstances, thus improving the reliability in conjunction with scripted mass video connections
• Blank password accepted when password policy enforcement is disabled
• User access to operating system requires now a service login license, which can be obtained via the support channel
• Video streaming improved for certain ONVIF camera models
• Improved handling of too many I frame requests for rtsp streams
• Security by default: fallback to TLS 1.0 and 1.1 is denied by default for Rcp+ control clients, TLS 1.2 is enforced by Rcp+ server on the decoder on port 443 3

SHA256: 6AC297078B1AD89C0169783B3A2D8E2CAC7BCF3150B95DBB6B86DA61FC62E2F6

New Features:
• New feature: Alias mapping for camera keys in IP matrix
• Enable greater number space up to 6 digits
• Prepare integration into BVMS numbering space
• We now support for more convenience a wider range of Prolific serial port USB adapters

Changes:
• Bugfix: Fix issue with duplicate encryption for CPP14 cameras 3

SHA256: 570A54A901BE96D348080C153029AEE4BC7AF6CBC156CF814A86D3C70E2859AF

New Features:
• The Video Output Capture Service (VOCS) has received enhancements:
• RTSP server for VOCS added, supporting control protocols RTSP (port 554) and RTSPS (port 9554), digest authentication, and video streaming via UDP or TCP.
• VOCS now supports rotated displays.
• VOCS_CONFIG RCP+ command now supports simultaneous multi-line configuration.
• Added VOCS RTSP server documentation for download on decoder webpage.
• Support of snap.jpg on rotated displays.
• IP Matrix supports mixed decoder groups with VJD-7513 and VJD-7523 devices.
• SNMP trap service logs are now included in log download.

Changes:
• Human temperature detection (HTD) feature set is removed.
• Detector and handler added for sporadic one-time VOCS grabber issue after device boots.
• An issue is fixed for RCP via CGI commands with multi-packet responses.
• An issue is fixed to avoid timeout issues in some HTTP clients. HTTP POST return code for successful file uploads is changed from 200 to 204 to signal that no content will be sent to the client as response to the POST.
• RCP+ documentation is updated for download on decoder webpage. 3

SHA256: 525C14EA720971DEED00E2B0E9B912A574420731301A6E6CBF5B3E20EE5A7D10

Changes:
• A security issue is fixed in the RCP+ SDK.
• An issue is fixed where empty passwords were not handled correctly for RCP+ via CGI commands.
• An issue is fixed in connection setup to support next Bosch camera FW 9.0.
• Support of further USB to serial COM port adapter for KBD-DIGITAL keyboard connectivity, CableCreation CD0487, based on the TFDI-FT232RL chipset.
• Prolific PL2303 [hardware ID USB\VID_067B&PID_2303]
• Prolific PL2303GT [hardware ID USB\VID_067B&PID_23C3]
• ATEN UC232A [hardware ID USB\VID_0557&PID_2008]
• Unitek Y-108 [hardware ID FTDIBUS\VID_0403+PID_6001]
• CableCreation CD0489 (PL2303) [hardware ID USB\VID_067B&PID_2303] is compatible to the already supported Prolific PL2303 adapter.
• CableCreation CD0487 [hardware ID USB\VID_0403&PID_6001].
• Log export file content has been reduced to only contain latest and only application-related logs.
• An issue is fixed with log export file encryption when the device webpage is used.
• An issue is fixed with the SetVocsConfig Rcp+ command.
• An issue is fixed with the CPU overload detection threshold, affecting the SNMP traps feature (processing overload trap). 3

SHA256: DCA243EA29EA52C8AD2EFA41FBB248FA9E940428C5C177952729EA1385EF5F00

New Features:
• SRTP for encrypted multicast traffic is supported. This allows fully secured communication with and video streaming from CPP13 and CPP14 cameras in multicast environments.
• SNMPv3 trap service has been added, including the support of SNMP-related RCP+ commands for configuration.
• A JPEG snapshot is now possible from each of the displays, including JPEG quality settings parameter.
• Display order can be re-arranged in case Windows display detection differs from mechanical order.
• The default layout is depending on the display number to simplify the identification of d isplay order. The number of video windows per display increases as square of the display number.
• The web interface of the decoder has been updated to the latest style guide and re -structured to ease usage for installation, licensing, and integration purposes.
• The new web pages provide links to documentation and include a live preview.
• Maintenance log file creation and download is supported by a workflow mechanism.
• A keyboard emulator supports initial setup for IP Matrix even without keyboard connected. 3

Changes:
• The Video SDK as one of the core components for the decoder firmware has been updated to latest version 6.40, providing a great number of improvements and fixes, mainly around ONVIF and RTSP support, increasing the overall robustness.
• An issue is fixed for banner upload when banners are activated.
• An issue is fixed for zooming out in client dewarping mode of panoramic camera streams.
• An issue is fixed where client dewarping was not working on line 1 of a panoramic camera in onboard dewarping mode. Onboard dewarping is only available for lines 2 and higher, line 1 always provides the full warped image circle.
• An issue with DNS server configuration is fixed.
• An issue is fixed where CPP13 and CPP14 cameras were not correctly connected in camera sequences.
• Maintenance log file download is improved, supported by the new web interface structure.
• An issue is fixed where daylight saving time was incorrectly reflected in time zone offset calculation.

SHA256: 488E5E9090FD44A9733BAEC295475B2F9D695538AEA055E1AB4AD3DCC97AD716

New Features:
• Support for HOST_NAME to get and set the device’s hostname; only supported in extended configuration mode.
• Support for DNS_SERVER_IP_STRING to get and set primary and secondary DNS server IPv4 addresses.

Changes:
• Optimized transparent data processing time to allow adequate transparent data pass-through for serial PTZ keyboard.
• An issue is fixed to apply e-PTZ presets correctly in camera sequences.
• Feature loss due to suppressing encrypted UDP multicast connections for Bosch IP cameras with firmware 8 and higher, and fall back to TCP, tunneled via HTTPS control connection. (This feature will be added again with FW 10.40.) 3

SHA256: 74BF9600D1DA5FCBED897299D04EE828D7D7666A3E2B2E053FF534420A45539A

New Features:
• The default setting for Automatic IPv4 address assignment is set to “DHCP plus Link-Local”. Though this might seem a small change, it may have an impact:
The former default IP address 192.168.0.200 will virtually become obsolete. Instead, the camera will assign itself an auto-IP address out of the range 169.254.1.0 to 169.254.254.255 as long as there is no other IP address assigned by a DHCP server. (https://en.wikipedia.org/wiki/Link-local_address) The advantage is that there are no more duplicate IP addresses, which is considered prohibited in a network.
• Network authentication 802.1x with EAP/TLS has been added. Please note that the server certificate needs to get the usages ‘Trust’ and ‘EAP_TLS_Trusted’ assigned. The client certificate will get the necessary usages assigned automatically.
• The possibility of large banner overlays has been introduced.
• Banners can be uploaded as images that can be displayed over three areas: top, center and bottom. The images are scaled to fill the area and cropped where necessary.
• Banners can be sequenced with a configurable dwell time.
• Configuration Manager 7.60 is supporting this with upload and banner sequence configuration, including banner previews.
• Set and recall prepositions for moving cameras (AUTODOME, MIC) as well as for ONVIF PTZ cameras via keyboard has been added to the IP Matrix functionality.
• Images can be uploaded to the decoder for two purposes, using Configuration Manager. The images shall be in JPG format and must be named as follows:
• ‘monitor background’ image, shown as background of an empty video window:
‘Logo.jpg’
• ‘’no camera’ image, shown on connection failure: ‘NoCamLogo.jpg’

Changes:
• An issue was fixed where uploading a new video loss image did not break the software seal. 3

SHA256: 47439952D478456386AC6CD5E3CBB0C6B41E157CEA2CB41012E552475FEA4E5C

Changes:
• A security vulnerability has been fixed where a crafted configuration packet sent by an authenticated administrative user can be used to execute arbitrary commands in system context (CVE-2021-23862). For more details refer to our Security Advisory BOSCH-SA-043434-BT, published at our Security Advisory web page https://www.boschsecurity.com/xc/en/support/product-security/security-advisories.html or visit our PSIRT website at https://psirt.bosch.com.

New Features:
IP Matrix enhancements
• KBD-DIGITAL is supported in addition to KBD-UNIVERSAL XF. This keyboard requires a serial-to-USB adapter to connect to the decoder. Both keyboards can be mixed in a clustered multi-decoder IP Matrix, one keyboard per decoder.
• Playback from local recording is supported. Permission is configured via Configuration Manager for the whole IP Matrix, valid for all users.
• Buttons for next and previous camera have been added to the KBD-UXF functions.
• Audio can be switched on or off via keyboard.
• Camera channels can be extended via license up to 64 cameras per decoder unit. Note:
IP Matrix manual is now separated into
• One configuration manual for IP Matrix
• One operation manual for IP Matrix using KBD-UXF
• One operation manual for IP Matrix using KBD-DIGITAL Security
• The latest Microsoft Windows security updates have been included. Miscellaneous
• Background image and connection loss image can be uploaded to the decoder, replacing the default images. Reverting them to default is done by uploading an empty image. Note: Upload is only possible in conjunction with an empty service password.

Changes:
• Temperature control margin increased to improve maximum performance at the specified maximum temperature, covering component tolerances, and to ensure that all products adhere fully to their specification.
• Various minor bug fixes. 8 6.7. Features with initial release 9.51
• VIDEOJET decoder 7000 displays video from Standard Definition (SD), High Definition (HD), 4K Ultra High Definition (UHD), and Megapixel (MP) cameras and encoders using H.264 or MPEG-4 encoding at up to 60 frames per second over IP networks.
• VIDEOJET decoder 7000 provides an HDMI and a DisplayPort (via USB-C connector) output, both capable of driving up to 4K UHD displays simultaneously.
• Display settings are automatically discovered and set for optimal display performance.
• Monitor layouts can be switched independently for each display.
• Upright monitors (portrait mode) are supported.
• Video window (cameo) aspect ratio can be set to 16:9, 9:16, 3:4, or 1:1.
• Active camera connections and layout are stored and automatically reconnected after reboot if configured. To avoid deadlock in case of an overload situation the automatic reconnect will be deactivated after VIDEOJET decoder

SHA256: F53815BE2EECE4F9D2E8B886EC9D46AEDB471BA9ECF2B604E9C36281CC5B4F6B