Suceava — livrare în toată România Zilnic 08:00–17:00 Locație 0751 478 912
Type4 ManualCallPoint Jeweller – Alarmă
Ajax · Alarmă · Manual call points

Type4 ManualCallPoint Jeweller – specificații și firmware

Ajax nu publică un fișier de firmware pentru acest model.
Înainte de actualizare: verifică pe eticheta aparatului modelul exact și versiunea hardware și folosește firmware-ul din regiunea aparatului (de exemplu Global sau Europa). Un firmware greșit poate bloca aparatul. Nu întrerupe alimentarea în timpul actualizării.

Type4 ManualCallPoint Jeweller este o componentă de sistem de alarmă Ajax din categoria „Manual call points”.

Câteva date tehnice importante: funcționare între 0 și +50 °C. Ca gabarit, cântărește 214 g și are dimensiunile 102 × 104 × 39 mm.

Pentru Type4 ManualCallPoint Jeweller, Ajax nu oferă un fișier de firmware descărcabil. Mai jos scrie cum se actualizează.

Tabelul de specificații de mai jos conține toate datele tehnice publicate de producător, traduse în română.

Cum se actualizează Type4 ManualCallPoint Jeweller

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații Type4 ManualCallPoint Jeweller

Comunicație

Tehnologie de comunicație JewellerProprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.
Benzi de frecvență868.0–868.6 MHz
Depends on the sales region.
Putere maximă radiată (ERP)Până la 25 mW
Automatic power control to reduce power consumption and radio interference.
Modulație semnal radioGFSK
Rază de comunicație radioPână la 1,700 m
Between the device and a fire alarm central unit or a range extender in an open space.
Comunicație criptatăAll stored and transmitted data is protected by block encryption featuring a dynamic key.
Salt de frecvențăTo prevent radio interference and jamming.

Caracteristici principale

Resettable frangible elementactivates the button
When the central part (frangible element) is pressed, the button depresses inward, triggering an alarm or initiating a scenario. Two yellow stripes appear at the top and bottom, indicating the device's state.
Operating modes- fire alarm
- evacuation
- auxiliary alarm
- fault alert
- panic button
- gas leak alarm
- water leak alarm
- custom action
With appropriate settings, it activates an alarm or controls Ajax automation devices.
LED status indicationfire alarm
faults
The LED indicator on the device enclosure lights up when a fire alarm is triggered or faults are detected.
Interconnected fire detector alarmsby pressing the button
By pressing the frangible element, fire detectors in the system trigger the built-in sirens.
Critical alertsThe system can activate intrusion sirens and send audible alarm notifications to users, even if the sound is muted, the Do Not Disturb mode is on, or headphones are connected.
Protection against accidental pressesLift the transparent lid to access the frangible element. The lid protects against false button presses.
Alarm transmission to CMScan be disabled

Special tool (key)

Button resetafter pressing
To reset the button, insert the special tool into the corresponding hole.
Hole in the enclosureto hang on a ring from a keychain
The person responsible for fire safety can carry the special tool on their keychain.
Convenient dismantlingThe special tool opens the lock to dismantle the device from SmartBracket mounting panel.

Recomandări de montaj

It is recommended to install the button in easily accessible places at a height of 1.4 m.
The device is designed for outdoor and indoor use.

Protecție anti-sabotaj

Tamper buttonNotifies on attempts to detach the button from the surface or remove it from the mounting panel.
Protecție anti-spoofingAutentificare dispozitiv
Connection loss detectionafter 36 s
Detection time depends on Jeweller settings.

Alimentare

Baterie2 × CR123A
Pre-installed. With typical use (one press lasting 1 minute per week), the batteries can last up to 7 years.

Carcasă

Dimensiuni102 × 104 × 39 mm
Greutate214 g
Interval temperatură de funcționarefrom 0 °C – +50 °C
Umiditate de funcționarePână la 80%

Culoare

Red

Conținut set

Type4 ManualCallPoint Jeweller
SmartBracket mounting panel
Special tool (key)
2 × CR123A battery (pre-installed)
Kit de montaj
Ghid de pornire rapidă

Revizie

1

Standarde și certificări

Directiva REDEN 300 220-1 V3.1.1
EN 300 220-2 V3.2.1
Certificate issued by MiCOM Labs
Directiva RoHSEN IEC 63000:2018
Test report issued by Shenzhen NTEK Testing Technology Co.
Directiva EMCEN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
Certificate issued by MiCOM Labs
Directiva de joasă tensiune (LVD)EN IEC 62368-1:2020 / A11:2020
EN IEC 62311:2008
Certificate issued by MiCOM Labs
PSTI UKSchedule 1

Compatibil cu

Type4 Fire Hub Jeweller, Type4 Fire ReX Jeweller, Type4 Hub (4G) Jeweller, Type4 ReX Jeweller

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.

Documente oficiale

Denumiri și variante: Type4 ManualCallPoint, MCP.T4R.J

Modele din aceeași serie

Caută alt model