Suceava — livrare în toată România Zilnic 08:00–17:00 Locație 0751 478 912
Type4 FireProtect (Sounder) Jeweller – Alarmă
Ajax · Alarmă · Fire alarm devices

Type4 FireProtect (Sounder) Jeweller – specificații și firmware

Type4 FireProtect Jeweller sounders and VADs

Ajax nu publică un fișier de firmware pentru acest model.
  • IP54
Înainte de actualizare: verifică pe eticheta aparatului modelul exact și versiunea hardware și folosește firmware-ul din regiunea aparatului (de exemplu Global sau Europa). Un firmware greșit poate bloca aparatul. Nu întrerupe alimentarea în timpul actualizării.

Modelul Type4 FireProtect (Sounder) Jeweller face parte din gama Ajax, categoria „Fire alarm devices”.

Printre caracteristicile tehnice se numără protecție IP54 și funcționare între −10 și +60 °C. Ca gabarit, cântărește 561 g și are dimensiunile 145 × 145 × 51 mm.

Ajax nu publică un fișier de firmware pentru Type4 FireProtect (Sounder) Jeweller. Mai jos scrie cum se actualizează.

Mai jos găsești fișa tehnică completă, tradusă în română.

Cum se actualizează Type4 FireProtect (Sounder) Jeweller

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații Type4 FireProtect (Sounder) Jeweller

Variante

Type4 FireProtect (Sounder/VAD) JewellerFP.T4AV.J — specificațiile de mai jos
Type4 FireProtect (VAD) JewellerFP.T4V.J
Type4 FireProtect (Sounder) JewellerFP.T4A.J

Comunicație

Tehnologie de comunicație JewellerProprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced sabotage protection.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.
Benzi de frecvență868.0–868.6 MHz
Putere maximă radiată (ERP)Până la 20 mW
Automatic power control to reduce power consumption and radio interference.
Modulație semnal radioGFSK
Rază de comunicație radioPână la 1,700 m
Between the device and control and indicating equipment (CIE) or a range extender in an open space.
Comunicație criptatăAll stored and transmitted data is protected by block encryption featuring a dynamic key.
Salt de frecvențăTo prevent radio interference and jamming.

Alarm annunciation

Alarm typeacoustic and light
A sounder and LED frame.
Sound volumePână la 100 dB at a distance of 1 m
Adjusted by a PRO or user with admin rights in an Ajax app.
Sound pattern32 tones
Sound synchronizationAn audible alarm is automatically synchronized on all devices with a sounder connected to the same CIE.
Flash frequency90 ms ON / 1,910 ms OFF (cycle duration: 2,000 ms; frequency: 0.5 Hz)
Alarm annunciation testTo check the sound and visual alarm signals to ensure fire alarm signals are clearly audible and visible in the premises.

Recomandări de montaj

The device's recommended installation height is up to 3 m on the ceiling and up to 2.4 m on the wall.
The device is designed for outdoor and indoor use.

Protecție anti-sabotaj

Tamper buttonFault notification when an attempt is made to remove the device from the mounting panel.
Lock for SmartBracketto secure the device on the SmartBracket mounting panel
When locked, the lock secures the device and prevents it from being removed without a special tool.
Protecție anti-spoofingAutentificare dispozitiv
Connection loss detectionafter 36 s
Detection time depends on Jeweller settings.

Alimentare

Baterie4 × CR123A
Pre-installed.
Tool-free battery replacementTo replace the batteries, turn the battery compartment cover counterclockwise.
Reverse polarity protectionPrevents device damage if the batteries are put in incorrectly.
Recommended battery typeHuiderui CR123A; 3 V; 1,600 mAh, LiMnO₂
Autonomie estimată a baterieiPână la 5 years
In standby mode.

Carcasă

Dimensiuni145 × 145 × 51 mm
Greutate561 g
Interval temperatură de funcționarefrom –10 °C – +60 °C
Umiditate de funcționarePână la 80%
Clasă de protecțieIP54
Flammability ratingUL 94 V-0

Culoare

Negru
Alb
Red

Conținut set

Type4 FireProtect (Sounder/VAD) Jeweller
4 × CR123A battery (pre-installed)
SmartBracket mounting panel
Kit de montaj
Ghid de pornire rapidă

Revizie

1

Standarde și certificări

Directiva REDETSI EN 300 220-1 V3.1.1
ETSI EN 300 220-2 V3.3.1
Certificate issued by TIMCO Engineering, Inc.
Directiva EMCETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-3 V2.3.2
Certificate issued by TIMCO Engineering, Inc.
Directiva RoHSEN IEC 63000:2018
Test report issued by Shenzhen NTEK Testing Technology Co.
Directiva de joasă tensiune (LVD)EN IEC 62368-1:2024+A11:2024
EN 62479:2010
Certificate issued by TIMCO Engineering, Inc.
PSTI UKSchedule 1

Compatibil cu

Type4 Fire Hub Jeweller, Type4 Fire ReX Jeweller, Type4 Hub (4G) Jeweller, Type4 ReX Jeweller

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.

Documente oficiale

Denumiri și variante: Type4 FireProtect (Sounder), Type4 FireProtect Sounder, FP.T4A.J

Modele din aceeași serie

Caută alt model