
Ajax Superior KeyPad Plus G3 Jeweller este o componentă de sistem de alarmă, listat de producător la „Keypads”.
Pe scurt, aparatul are rezistență la impact IK06 și funcționare între −10 și +40 °C. Aparatul cântărește 252 g și are dimensiunile 165 × 113 × 20 mm.
Pentru Superior KeyPad Plus G3 Jeweller, Ajax nu oferă un fișier de firmware descărcabil. Mai jos scrie cum se actualizează.
Specificațiile complete, cu etichetele traduse în română, sunt în tabelul de mai jos.
Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.
Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.
Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.
| Superior Jeweller data transfer protocol | Proprietary wireless protocol for transmitting commands, alarms, and events. An upgraded version of the Jeweller radio protocol for Ajax Superior devices, ensuring compliance with Grade 3 (EN 50131). Key features: - Two-way communication. - Advanced sabotage protection. - Enhanced block encryption with a dynamic key. - Instant notifications. - Remote control and configuration in Ajax apps. |
|---|---|
| Benzi de frecvență | 865.0–868.0 MHz 868.0–868.6 MHz 868.7–869.2 MHz 869.4–869.65 MHz |
| Putere maximă radiată (ERP) | Până la 20 mW Automatic power control to reduce power consumption and radio interference. |
| Modulație semnal radio | GFSK |
| Rază de comunicație radio | Până la 3,000 m Between the device and a hub (or a range extender) in open space. The maximum range depends on the hub model. |
| Comunicație criptată | All stored and transmitted data is protected with advanced encryption, ensuring both confidentiality and integrity. |
| Salt de frecvență | To prevent radio interference and jamming. |
| Sensor type | capacitive |
|---|---|
| Authentication methods | - access codes - Tag key fobs - Pass cards |
| Access codes | - keypad code 1 per each Superior KeyPad Plus G3 Jeweller. - user codes 1 per user. The total number depends on the hub model. - unregistered user codes 1 per user not registered in an Ajax system. The total number depends on the hub model. - duress codes 1 per each Superior KeyPad Plus G3 Jeweller and 1 per each user. The total number depends on the hub model. |
| Contactless access | DESFire® EV1, EV2, EV3 ISO 14443-А (13.56 MHz) |
| Arming without entering a code | When enabled, this feature allows users to arm the facility without entering a code or presenting an access device. |
| Group security management | Users can change the security mode of groups they have access to directly from the keypad. |
| Authorization confirmation with a passcode | This feature activates two-factor authentication. When enabled, users must first present an access device (Pass or Tag) and then enter a passcode to confirm authorization. |
| Function button | Operates in one of the following modes: - panic Sends an alarm to the central monitoring station and users. Also activates the sirens connected to the system. - mute fire alarm Mutes alarms triggered by interconnected fire detectors. - none The button is disabled. |
| Indication of malfunctions and security mode | When enabled, the keypad uses LED indicators to show the current security mode, as well as detector malfunctions or loss of communication with the hub. |
| ACE Type | type B |
| The device is designed for indoor use only. |
| Unauthorized access auto-lock | The keypad locks if an incorrect code is entered or unverified access devices are used more than 3 times in a row within 1 minute. The lock duration can be adjusted by a PRO or user with admin rights in an Ajax app. |
|---|---|
| Alarmă anti-sabotaj | The system sends notifications about attempts to detach the keypad from the surface or remove it from the mounting panel. |
| Holding screw | Secures the device on SmartBracket. |
| Protecție anti-spoofing | Ensures device authentication during communication with a hub. |
| Detecție pierdere comunicație | after 36 seconds of no signal Detection time depends on Jeweller or Jeweller/Fibra settings. |
| Baterie | 4 × AA Pre-installed. |
|---|---|
| Tip | type C |
| Autonomie estimată a bateriei | Până la 4.5 years |
| Operating voltage range | 2.25−3.30 V⎓ |
| Nominal operating voltage | 3 V⎓ |
| Quiescent current consumption at nominal voltage | 130 μA |
| Maximum current consumption at nominal voltage | 10.5 mA |
| Full battery capacity | 6,000 mAh |
| Tensiune la baterie descărcată | 2.5 V⎓ |
| Tensiune de revenire după descărcare | 2.7 V⎓ |
| Tensiune baterie la final de viață | 2.25 V⎓ The device switches off. |
| Capacitate baterie la final de viață | 500 mAh |
| Producător | Energizer |
| Dimensiuni | 165 × 113 × 20 mm |
|---|---|
| Greutate (varianta neagră) | 252 g |
| Greutate (varianta albă) | 270 g |
| Interval temperatură de funcționare | from −10 °C – +40 °C |
| Umiditate de funcționare | Până la 75% |
| Clasă de protecție | IP30, IK06 |
| Negru | |
| Alb |
| Superior KeyPad Plus G3 Jeweller | |
| 4 × AA battery (pre-installed) | |
| SmartBracket mounting panel | |
| Kit de montaj | |
| Ghid de pornire rapidă |
| Conformitate cu standardele de alarmă | EN 50131-1:2006/A1:2009/A2:2017/A3:2020 EN 50131-3:2009 EN 50131-5-3:2017 EN 50131-6:2017/A1:2021 PD 6662:2017* Certificate issued by TREZOR TEST s.r.o. |
|---|---|
| Grad de securitate (SG) | 3 Certificate issued by TREZOR TEST s.r.o. |
| Directiva RED | ETSI EN 300 220-1 V3.1.1 ETSI EN 300 220-2 V3.2.1 ETSI EN 300 330 V2.1.1 Certificate issued by TIMCO Engineering, Inc. |
| Directiva RoHS | EN IEC 63000:2018 Test report issued by Shenzhen NTEK Testing Technology Co. |
| Directiva EMC | ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-3 V2.3.2 ETSI EN 301 489-17 V3.3.1 EN 55032:2015+A11:2020 EN 55035:2017+A11:2020 Certificate issued by TIMCO Engineering, Inc. |
| Clasă de mediu conform EN 50131 | II Certificate issued by TREZOR TEST s.r.o. |
| Directiva de joasă tensiune (LVD) | EN IEC 62368-1:2024+A11:2024 EN IEC 62311:2020 Certificate issued by TIMCO Engineering, Inc. |
| PSTI UK | Schedule 1 |
| Certification NF&A2P – 3 Boucliers suivant le référentiel NF324-H58 | NF324-H58 NF EN 50131-3 RTC 50131-3 NF EN 50131-6 RTC 50131-6 NF EN 50131-5-3 NF EN 50130-4 NF EN 50130-5 Organismes certificateurs : www.cnpp.com www.marque-nf.com Certificat №: 24050011 |
| EN54 Fire Hub Jeweller, EN54 Fire ReX Jeweller, Hub 2 (2G) Jeweller, Hub 2 (4G) Jeweller, Hub 2 Plus Jeweller, Hub BP Jeweller, Hub BP Jeweller (without casing), ReX 2 Jeweller, ReX Jeweller, Superior Hub G3 Jeweller, Superior Hub Hybrid (2G), Superior Hub Hybrid (4G), Superior Hub Hybrid (4G) (without casing), Superior Hub Hybrid 2, Superior Hub Hybrid 2 (without casing), Superior MegaHub, Superior MegaHub (without casing), Superior ReX G3 Jeweller |
Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.
Denumiri și variante: Superior KeyPad Plus G3, KPP.G3.J
AlarmăKeyPad JewellerFără firmware public
AlarmăKeyPad Outdoor JewellerFără firmware public
AlarmăKeyPad Plus JewellerFără firmware public
AlarmăKeyPad TouchScreen JewellerFără firmware public
AlarmăSuperior KeyPad FibraFără firmware public
AlarmăSuperior KeyPad Outdoor FibraFără firmware public
AlarmăSuperior KeyPad Plus JewellerFără firmware public
AlarmăSuperior KeyPad TouchScreen FibraFără firmware public
AlarmăSuperior KeyPad TouchScreen G3 JewellerFără firmware public