Suceava — livrare în toată România Zilnic 08:00–17:00 Locație 0751 478 912
LeaksProtect Jeweller – Alarmă
Ajax · Alarmă · Leak detectors

LeaksProtect Jeweller – specificații și firmware

Ajax nu publică un fișier de firmware pentru acest model.
  • IP65
Înainte de actualizare: verifică pe eticheta aparatului modelul exact și versiunea hardware și folosește firmware-ul din regiunea aparatului (de exemplu Global sau Europa). Un firmware greșit poate bloca aparatul. Nu întrerupe alimentarea în timpul actualizării.

LeaksProtect Jeweller este o componentă de sistem de alarmă Ajax din categoria „Leak detectors”.

Pe scurt, aparatul are protecție IP65 și funcționare între 0 și +50 °C. Aparatul cântărește 41 g și are dimensiunile 62 × 62 × 14 mm.

Nu există un firmware public de la Ajax pentru LeaksProtect Jeweller. Mai jos scrie cum se actualizează.

Specificațiile complete, cu etichetele traduse în română, sunt în tabelul de mai jos.

Cum se actualizează LeaksProtect Jeweller

Ajax nu publică fișiere de firmware; actualizarea se face prin hub/aplicația Ajax.

Ajax nu publică fișiere de firmware: dispozitivele se actualizează automat prin hub, iar hub-ul primește noile versiuni OS Malevich prin internet, fără intervenția utilizatorului.

Dacă producătorul publică pe viitor un fișier de firmware pentru acest model, îl adăugăm automat pe această pagină.

Specificații LeaksProtect Jeweller

Comunicație

Tehnologie de comunicație JewellerProprietary wireless communication technology to transmit commands, alarms, and events.
Key features:
- Two-way communication.
- Advanced anti-sabotage.
- Block encryption featuring a dynamic key.
- Instant notifications.
- Remote control and configuration in Ajax apps.
Benzi de frecvență866.0–866.5 MHz
868.0–868.6 MHz
868.7–869.2 MHz
905.0–926.5 MHz
915.85–926.5 MHz
921.0–922.0 MHz
Depends on the sales region.
Putere maximă radiată (ERP)Până la 20 mW
Automatic power control to reduce power consumption and radio interference.
Modulație semnal radioGFSK
Rază de comunicație radioPână la 1,300 m
Between the device and a hub (or a range extender) in an open space.
Comunicație criptatăAll stored and transmitted data are protected by block encryption featuring a dynamic key.
Radio frequency hoppingTo prevent radio interference and jamming.

Caracteristici principale

Always activeDetects water leaks 24/7/365
First flooding signs detectionAll four sides of the device have contact pairs. LeaksProtect Jeweller detects the first signs of flooding as soon as water reaches at least one of them.
Detection timewithin 0.15 s
The detector sends an alarm as soon as it becomes wet on either side.
Tool-free installationPlace LeaksProtect Jeweller on the floor under a washing machine, dishwasher, bathtub, or heating radiator.
Remote control and configurationvia Ajax apps
Ajax apps provide information about the device, including current state (leakage detection), battery charge status, and communication with a hub.
LED indicationThe LED is placed under the Ajax logo on the enclosure and reports the detector’s states.
Automation scenariosLeaksProtect Jeweller can activate various automation scenarios. For example, it can trigger the WaterStop Jeweller shutoff valve to turn off the water supply in case of flooding.

Recomandări

The device is designed for indoor use only.

Protecție anti-sabotaj

Alarmă anti-sabotajNotifications on attempts to violate the enclosure integrity.
Protecție anti-spoofingAutentificare dispozitiv
Detecție pierdere comunicațieafter 36 s
Detection time depends on the Jeweller or Jeweller/Fibra settings.

Alimentare

Baterie2 × AAA
Pre-installed.
TipType C
Autonomie estimată a baterieiPână la 5 years
Detector’s operating voltage range2.1−3.3 V⎓
Detector’s nominal operating voltage3 V⎓
Quiescent detector’s current consumption at nominal voltage14 μA
Maximum detector’s current consumption at nominal voltage33 mA
Full battery capacity1,000 mAh
Tensiune la baterie descărcată2.5 V⎓
Tensiune de revenire după descărcare2.7 V⎓
Tensiune baterie la final de viață2.1 V⎓
Device is switched off.
Capacitate baterie la final de viață100 mAh
ProducătorHuiderui
Energizer

Carcasă

Dimensiuni62 × 62 × 14 mm
For white devices manufactured before May 2026 and black devices manufactured before July 2026: 59 × 59 × 14 mm.
2.44″ × 2.44″ × 0.55″
For white devices manufactured before May 2026 and black devices manufactured before July 2026: 2.32″ × 2.32″ × 0.55″.
Greutate41 g
Interval temperatură de funcționarefrom 0 °C – +50°C
Umiditate de funcționarePână la 100%
Clasă de protecțieIP65

Culori

Negru
Alb

Conținut set

LeaksProtect Jeweller
2 AAA batteries (pre-installed)
Ghid de pornire rapidă

Standarde și certificări

Directiva REDEN 300 220-1 V3.1.1
EN 300 220-2 V3.2.1
Certificate issued by MiCOM Labs
Directiva RoHSEN IEC 63000:2018
Test report issued by Shenzhen NTEK Testing Technology Co.
Directiva EMCEN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
Certificate issued by MiCOM Labs
Directiva de joasă tensiune (LVD)EN 62479:2010
EN 62368-1:2014+A11:2017
Certificate issued by MiCOM Labs
ID FCC2AX5VLEAPRO-NA
Certificate issued by MiCOM Labs
ID IC26860-LEAPRONA1
Certificate issued by MiCOM Labs
CSAANSI/UL 62368-1:19
CSA C22.2 No. 62368-1:19
CSA Group Testing & Certification Inc.
PSTI UKSchedule 1

Compatibil cu

EN54 Fire Hub Jeweller, EN54 Fire ReX Jeweller, Hub (2G) Jeweller, Hub (4G) Jeweller, Hub 2 (2G) Jeweller, Hub 2 (4G) Jeweller, Hub 2 Plus Jeweller, Hub BP Jeweller, Hub BP Jeweller (without casing), ReX 2 Jeweller, ReX Jeweller, Superior Hub G3 Jeweller, Superior Hub Hybrid (2G), Superior Hub Hybrid (4G), Superior Hub Hybrid (4G) (without casing), Superior Hub Hybrid 2, Superior Hub Hybrid 2 (without casing), Superior MegaHub, Superior MegaHub (without casing), Superior ReX G3 Jeweller

Specificațiile sunt cele publicate de Ajax, cu etichetele traduse în română (preluate la 02.11.2026). Ce nu am tradus a rămas în engleză.

Documente oficiale

Denumiri și variante: LeaksProtect, LP.Y.J

Caută alt model